TCAN1469-Q1

預覽

車用 CAN FD SIC 收發器,具局部網路功能、監控系統與匯流排故障診斷

產品詳細資料

Protocols CAN, CAN FD, CAN SIC Number of channels 1 Supply voltage (V) 5 to 28 Bus fault voltage (V) -58 to 58 Signaling rate (max) (Bits) 5000000 Rating Automotive
Protocols CAN, CAN FD, CAN SIC Number of channels 1 Supply voltage (V) 5 to 28 Bus fault voltage (V) -58 to 58 Signaling rate (max) (Bits) 5000000 Rating Automotive
SOIC (D) 14 51.9 mm² 8.65 x 6 VSON (DMT) 14 13.5 mm² 4.5 x 3
  • AEC-Q100: Qualified for automotive applications
  • Meets the requirements of ISO 11898-2:2024 Annex A and CiA 601-4 standards for Signal Improvement Capable CAN FD transceiver.
  • Supports selective wake or partial networking while transmitting and receiving error-free Classic CAN or CAN FD data.
  • CAN FD communication rates up to 8Mbps
  • Functional Safety Quality-Managed: TCAN1469-Q1
  • Functional Safety-Capable: TCAN1465-Q1
  • The TCAN146x-Q1 supports nominal processor IO voltages from 1.8V to 5V
  • Wide operating range:
    • ±58V Bus fault protection
    • ±12V Common mode
  • TCAN1469-Q1 supports:
    • Watchdog: Timeout, Window and Q&A
    • Bus fault diagnostics and reporting
    • Programmable INH/LIMP pin
  • 14-Pin SOIC, VSON and SOT23 packages
    • VSON package with improved automated optical inspection (AOI) capability
  • AEC-Q100: Qualified for automotive applications
  • Meets the requirements of ISO 11898-2:2024 Annex A and CiA 601-4 standards for Signal Improvement Capable CAN FD transceiver.
  • Supports selective wake or partial networking while transmitting and receiving error-free Classic CAN or CAN FD data.
  • CAN FD communication rates up to 8Mbps
  • Functional Safety Quality-Managed: TCAN1469-Q1
  • Functional Safety-Capable: TCAN1465-Q1
  • The TCAN146x-Q1 supports nominal processor IO voltages from 1.8V to 5V
  • Wide operating range:
    • ±58V Bus fault protection
    • ±12V Common mode
  • TCAN1469-Q1 supports:
    • Watchdog: Timeout, Window and Q&A
    • Bus fault diagnostics and reporting
    • Programmable INH/LIMP pin
  • 14-Pin SOIC, VSON and SOT23 packages
    • VSON package with improved automated optical inspection (AOI) capability

The TCAN146x-Q1 is a family of enhanced high-speed, CAN FD transceivers that meet the physical layer requirements of the ISO 11898-2:2024 Annex A for high speed CAN specification and the CiA 601-4 Signal Improvement (SIC) specification supporting data rates up to 8Mbps. The devices are configured using serial peripheral interface (SPI) for access to full functionality. The devices support nominal processor IO voltages from 1.8V to 5V by applying the appropriate voltage to the VIO pin, allowing lower power processors to be used.

These transceivers support selective wake (being able to wake-up based on WUF identification). This feature enables systems to implement partial networking and operate with a reduced number of nodes in an active state while the remaining nodes are in a low-power sleep mode. The transceivers and selective wake function meet the specifications of the ISO 11898-2:2024 standard.

The TCAN1469-Q1 is a full featured devices supporting watchdog and advanced bus diagnostics. For ease of debug, the advanced bus fault diagnostics and communication feature can be used to determine specific bus faults.

The TCAN146x-Q1 is a family of enhanced high-speed CAN FD SIC transceivers. The devices are register compatible within the family and with TCAN114x-Q1 family of CAN FD Partial Networking transceivers. The TCAN146x-Q1 family of devices provide system designers the flexibility to implement features without hardware modifications, and with minimal software changes. The TCAN1469-Q1 inhibit (INH) pin can be used to either enable node power or to be configured as a limp home pin when a watchdog error takes place.

The TCAN146x-Q1 is a family of enhanced high-speed, CAN FD transceivers that meet the physical layer requirements of the ISO 11898-2:2024 Annex A for high speed CAN specification and the CiA 601-4 Signal Improvement (SIC) specification supporting data rates up to 8Mbps. The devices are configured using serial peripheral interface (SPI) for access to full functionality. The devices support nominal processor IO voltages from 1.8V to 5V by applying the appropriate voltage to the VIO pin, allowing lower power processors to be used.

These transceivers support selective wake (being able to wake-up based on WUF identification). This feature enables systems to implement partial networking and operate with a reduced number of nodes in an active state while the remaining nodes are in a low-power sleep mode. The transceivers and selective wake function meet the specifications of the ISO 11898-2:2024 standard.

The TCAN1469-Q1 is a full featured devices supporting watchdog and advanced bus diagnostics. For ease of debug, the advanced bus fault diagnostics and communication feature can be used to determine specific bus faults.

The TCAN146x-Q1 is a family of enhanced high-speed CAN FD SIC transceivers. The devices are register compatible within the family and with TCAN114x-Q1 family of CAN FD Partial Networking transceivers. The TCAN146x-Q1 family of devices provide system designers the flexibility to implement features without hardware modifications, and with minimal software changes. The TCAN1469-Q1 inhibit (INH) pin can be used to either enable node power or to be configured as a limp home pin when a watchdog error takes place.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋後再試一次。
檢視所有 1
類型 名稱 日期
* Data sheet TCAN146x-Q1 Enhanced CAN FD SIC Transceiver with Partial Networking datasheet PDF | HTML 2024年 2月 1日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TCAN1145EVM — 具看門狗和部分網路評估模組的 TCAN1145-Q1 CAN 收發器

This EVM can be used to evaluate the TLIN114x family of devices. The CAN bus is easily accessed via test points, the J7 header, and a DSUB9 connector, standard in a lot of automotive applications for cabling. All pins are available through headers or test points. There is an integrated USB2ANY (...)
使用指南: PDF
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
封裝 引腳 下載
SOIC (D) 14 檢視選項
VSON (DMT) 14 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中可靠性監測

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片