TMUXS7614D
- Dual supply range: ±4.5V to ±25V
- Single supply range: 4.5V to 42V
- Asymmetric dual supply support (For example: VDD=37.5V, VSS=-12.5V)
- 1.8V logic compatible
- SPI supply range: 1.8V – 5.5V
- SPI Interface with support up to 50MHz
- Manual mode (Standard SPI or Burst mode)
- SPI error detection: CRC, invalid read/write, and clock count error
- Compatible with SPI industry standard modes 0 and 3
- Ultra high channel density (2.5mm2/ch)
- Flow through SPI and supply routing for increased board density
- Integrated decoupling capacitors
- Precision performance:
- Low on-resistance: 1Ω (typical)
- Ultra low on-resistance flatness: 0.001Ω (typical)
- Low on-leakage current: 13pA (typical), 350pA (maximum)
- Ultra low charge injection: 2pC (typical)
- High current support: 470mA per channel (maximum)
- –40°C to +125°C operating temperature
- Rail-to-rail operation
- Bidirectional operation
- Break-before-make switching
- ESD protection HBM: 3000V
The TMUXS7614D is a complementary metal-oxide semiconductor (CMOS) switch device with eight independently selectable 1:1, single-pole, single-throw (SPST) switch channels. The device works with a single supply (4.5V to 42V), dual supplies (±4.5V to ±25V), or asymmetric supplies (such as VDD = 37.5V, VSS = –12V). The TMUXS7614D supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins ranging from VSS to VDD.
The switches of the TMUXS7614D are controlled with a serial peripheral interface (SPI). The SPI interface has many error detection features, such as CRC, invalid read/write, and clock count error detection. The SPI also supports Daisy Chain mode. Coupled with the flow through routing of the SPI pins, this allows for increased channel density in the system. The TMUXS7614D is a part of the precision switches and multiplexers family of devices that have very low on and off leakage currents allowing them to be used in high precision measurement applications.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TMUXS7614D 50V, SPI Controlled, Low-RON, High Density, 1:1 (SPST), 8-Channel Precision Switches with 1.8V Logic datasheet (Rev. C) | PDF | HTML | 2025年 4月 4日 |
| Application note | Key Voltage Considerations for Replacing a Photorelay With an Analog Switch | PDF | HTML | 2025年 3月 10日 | |
| Application note | Using SPI Controlled MUX To Increase Channel Density | PDF | HTML | 2024年 6月 14日 | |
| Application note | When to Replace a Relay With a Multiplexer (Rev. A) | PDF | HTML | 2024年 6月 7日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TMUXS7614DEVM — TMUXS7614D 評估模組
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| FCLGA (ZEM) | 30 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。