TUSB1146-Q1
- AEC-Q100 qualified for automotive applications
- Temperature: –40°C to 105°C, TA
- USB Type-C crosspoint switch supporting
- USB 3.2 + 2 DisplayPort™ Lanes
- 4 DisplayPort™ Lanes
- USB 3.2 x1 up to 10Gbps
- VESA DisplayPort™ 2.1 up to 10Gbps
- Supports D_DFP pin assignments C, D, and E
- Choice between adaptive or fixed equalization for USB DFP receivers.
- Linear and limited redriver supported on UFP transmitter
- Limited redriver option offers both TX voltage swing and TX equalization control
- 4 levels of TX voltage swing from 800mVpp up to 1100mVpp
- TX pre-shoot and de-emphasis
- Ultra-low-power architecture
- Up to 12dB equalization at 5.0GHz
- Transparent to DisplayPort™ link training
- Configuration through GPIO or I2C
- Hot-plug capable
- 5mm × 7mm, 0.5mm pitch VQFN package
The TUSB1146-Q1 is a VESA® DisplayPort™ Alt Mode over USB Type-C® redriving switch that supports USB 3.2 data rates up to 10Gbps and DisplayPort™ 2.1 up to 10Gbps for downstream facing port (host). The device is used for configurations C, D, and E from the VESA® DisplayPort™ Alt Mode over USB Type-C® standard. This protocol-agnostic linear redriver is also capable of supporting other USB Type-C® Alt Mode interfaces such as HDMI Alt Mode.
The TUSB1146-Q1 also incorporates an adaptive receiver equalization (AEQ) feature that can automatically find the best ISI compensation setting between the USB device and the TUSB1146-Q1. The AEQ finds the best setting to help improve the interoperability between a USB host and USB device. The TUSB1146-Q1 operates on a single 3.3V supply and comes in an Automotive Grade 2 temperature range.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TUSB1146-Q1 Automotive DisplayPort™ Alt Mode Over USB Type-C® Source 10 Gbps Linear Redriver Crosspoint Switch datasheet | PDF | HTML | 2025年 2月 27日 |
EVM User's guide | TUSB1146-Q1 USB Type-C® Evaluation Module User's Guide | PDF | HTML | 2025年 2月 19日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TUSB1146EVM — 具有適應性 EQ 的 Type-C USB 3.2 交替模式轉接驅動器/多工器評估模組
Type-C 實作。
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
TINA-TI — 基於 SPICE 的類比模擬程式
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
VQFN (RGF) | 40 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。