UCC25661-Q1

預覽

Automotive, high density, Wide VIN and VOUT LLC controller with IPPC

產品詳細資料

Rating Catalog Operating temperature range (°C) -40 to 125
Rating Catalog Operating temperature range (°C) -40 to 125
SOIC (DDB) 14 59.4 mm² 9.9 x 6
  • 50kHz to 750kHz full-load switching frequency
  • IPPC control enables wide input and output LLC (WLLC) operation
  • Enhanced light load management:
    • High frequency pulse skip for improved light load efficiency
    • Low frequency burst for low standby power
    • Audible frequency range skip for reduced audible noise
    • Integrated PFC on/off control signal to help further reduce standby power
  • Internal resonant-capacitor voltage synthesizer for enhanced signal reliability and high startup frequency support
  • Automatic capacitive region avoidance
  • Adaptive soft start with minimized inrush current
  • Integrated high-voltage startup (UCC256612-Q1, and UCC256614-Q1)
  • Integrated +0.6A and –1.2A gate drive
  • Complete protections
    • 50ns overcurrent protection (OCP); cycle-by-cycle current limit
    • Overvoltage protection (OVP), internal and external overtemperature protection (OTP)
    • Input and VCCP UVLO with internal 19V VCCP Clamp
  • SOIC-14 package with removed pins for high-voltage clearance
  • 50kHz to 750kHz full-load switching frequency
  • IPPC control enables wide input and output LLC (WLLC) operation
  • Enhanced light load management:
    • High frequency pulse skip for improved light load efficiency
    • Low frequency burst for low standby power
    • Audible frequency range skip for reduced audible noise
    • Integrated PFC on/off control signal to help further reduce standby power
  • Internal resonant-capacitor voltage synthesizer for enhanced signal reliability and high startup frequency support
  • Automatic capacitive region avoidance
  • Adaptive soft start with minimized inrush current
  • Integrated high-voltage startup (UCC256612-Q1, and UCC256614-Q1)
  • Integrated +0.6A and –1.2A gate drive
  • Complete protections
    • 50ns overcurrent protection (OCP); cycle-by-cycle current limit
    • Overvoltage protection (OVP), internal and external overtemperature protection (OTP)
    • Input and VCCP UVLO with internal 19V VCCP Clamp
  • SOIC-14 package with removed pins for high-voltage clearance

The UCC25661x-Q1 family is a high-frequency LLC controller implementing input-power proportional control (IPPC) scheme, along with an enhanced light-load management and multiple protection features.

IPPC widens the control range of the LLC converter and simplifies the design of wide input applications such as high voltage to low voltage (HV-LV) redundant auxiliary, key-off, or bias isolated power supplies. IPPC also simplifies the design of wide output applications such as light electric vehicle battery chargers (scooters, mopeds, golf carts, and fork lifts).

The UCC25661x-Q1 family has enhanced light-load management that improves the efficiency while minimizing audible noise. To minimize standby power in charger applications, the UCC25661x-Q1 family can directly disable the PFC controller when operating in burst mode.

The automatic capacitive region avoidance scheme along with the adaptive soft start with reverse recovery avoidance scheme ensures that the device can never work in a mode where there is a potential to damage the FETs. This scheme makes the controller ideal for working with a pre-biased load.

The UCC25661x-Q1 family comes with robust protection to help you design a reliable power supply. The UCC25661x-Q1 family has options supporting high-voltage startup (HVSU) and extended gain range (EGR). See details in the Device Comparison Table.

The UCC25661x-Q1 family is a high-frequency LLC controller implementing input-power proportional control (IPPC) scheme, along with an enhanced light-load management and multiple protection features.

IPPC widens the control range of the LLC converter and simplifies the design of wide input applications such as high voltage to low voltage (HV-LV) redundant auxiliary, key-off, or bias isolated power supplies. IPPC also simplifies the design of wide output applications such as light electric vehicle battery chargers (scooters, mopeds, golf carts, and fork lifts).

The UCC25661x-Q1 family has enhanced light-load management that improves the efficiency while minimizing audible noise. To minimize standby power in charger applications, the UCC25661x-Q1 family can directly disable the PFC controller when operating in burst mode.

The automatic capacitive region avoidance scheme along with the adaptive soft start with reverse recovery avoidance scheme ensures that the device can never work in a mode where there is a potential to damage the FETs. This scheme makes the controller ideal for working with a pre-biased load.

The UCC25661x-Q1 family comes with robust protection to help you design a reliable power supply. The UCC25661x-Q1 family has options supporting high-voltage startup (HVSU) and extended gain range (EGR). See details in the Device Comparison Table.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet UCC25661x-Q1 Family 750kHz Wide VIN /VOUT Range LLC Controller Optimized for Light-Load Efficiency datasheet PDF | HTML 2025年 5月 2日
Technical article Enabling automotive designers to increase power-density and reliability with LLC topology PDF | HTML 2025年 5月 2日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

計算工具

UCC25661X-CALC UCC25661X Design Calculator

The purpose of this tool is to aid in the design of the main power stage components of a LLC Resonant Converter along with component calculations using UCC25661x controller.
支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 控制器 (外部 FET)
UCC25661 具有高電壓啟動功能的大範圍 VIN 和 VOUT 750KHz LLC 控制器 UCC25661-Q1 Automotive, high density, Wide VIN and VOUT LLC controller with IPPC
參考設計

PMP41106 — 通用輸入、500W 定電流和定電壓電動自行車充電器參考設計

此參考設計為適合電動自行車應用的通用輸入、48V、10.4A 恆定電流 (CC)、恆定電壓 (CV) 充電器。此參考設計以 110Vac 輸入達到 91.5% 端對端峰值效率,而 230Vac 輸入可達到 93.50% 端對端峰值效率。此設計包含風扇控制和根據輸出電流的充電狀態指示。此參考設計使用 UCC28180、UCC256603、UCC28910和 TL103W 裝置。
Test report: PDF
參考設計

PMP23464 — 通用輸入、500W 恆定定電流和恆定電壓電動自行車充電器參考設計

此參考設計為適合電動自行車應用的通用輸入、71.4V、7A 恆定電流 (CC)、恆定電壓 (CV) 充電器。此參考設計以 115Vac 輸入達到 92.93% 端對端峰值效率,而 230Vac 輸入可達到 94.50% 端對端峰值效率。此設計包含風扇控制和根據輸出電流的充電狀態指示。此參考設計使用 UCC28180、UCC256603、UCC28910 和 TL103W 裝置。
Test report: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (DDB) 14 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片