Up to thirty-two 16 × 16-bit fixed-point multiplies per cycle
Up to 2.5MB of on-chip L3 RAM
Two DDR3/DDR3L memory interface (EMIF) modules
Supports up to DDR3-1066
Up to 2GB supported per EMIF
2x dual Arm® Cortex®-M4 co-processors (IPU1 and IPU2)
Up to four Embedded Vision Engines (EVEs)
4K @ 15fps encode and decode support for H.264 CODEC
Other CODECs are up to 1080p60
Full-HD video (1920 × 1080p, 60 fps)
Multiple video input and video output
2D and 3D graphics
Display controller with DMA engine and up to three pipelines
HDMI® encoder: HDMI 1.4a and DVI 1.0 compliant
2x dual-core Programmable Real-Time Unit and Industrial Communication SubSystem (PRU-ICSS)
2D-graphics accelerator (BB2D) subsystem
Vivante® GC320 core
Video Processing Engine (VPE)
Dual-core PowerVR® SGX544™ 3D GPU
Crypto hardware accelerators
AES, SHA, RNG, DES and 3DES
Three video Input Port (VIP) modules
General-Purpose Memory Controller (GPMC)
Enhanced Direct Memory Access (EDMA) controller
2-port gigabit ethernet (GMAC)
Sixteen 32-bit general-purpose timers
32-bit MPU watchdog timer
Five Inter-Integrated Circuit (I2C™) ports
Ten configurable UART/IrDA/CIR modules
Four Multichannel Serial Peripheral Interfaces (McSPI)
Quad SPI interface (QSPI)
SATA gen2 interface
Eight Multichannel Audio Serial Port (McASP) modules
SuperSpeed USB 3.0 dual-role device
High-speed USB 2.0 dual-role device
Four Multimedia Card/Secure Digital/Secure Digital Input Output interfaces (MMC™/SD®/SDIO)
PCI-Express® 3.0 subsystems with two 5-Gbps lanes
One 2-lane gen2-compliant port
or two 1-lane gen2-compliant ports
Dual Controller Area Network (DCAN) modules
CAN 2.0B protocol
Up to 247 General-Purpose I/O (GPIO) pins
Power, Reset, and Clock Management (PRCM)
On-chip debug with CTools technology
28-nm CMOS technology
23 mm × 23 mm, 0.8-mm pitch, 760-pin BGA (ABC)
All trademarks are the property of their respective owners.
Description for the AM5726
AM572x Sitara™ processors are Arm applications processors built to meet the intense processing needs of modern embedded products.
AM572x devices bring high processing performance through the maximum flexibility of a fully integrated mixed processor solution. The devices also combine programmable video processing with a highly integrated peripheral set. Cryptographic acceleration is available in every AM572x device.
Programmability is provided by dual-core Arm® Cortex®-A15 RISC CPUs with Arm® Neon™ extension, and two TI C66x VLIW floating-point DSP core, and Vision AccelerationPac (with 4x EVEs). The Arm allows developers to keep control functions separate from other algorithms programmed on the DSPs and coprocessors, thus reducing the complexity of the system software.
Additionally, TI provides a complete set of development tools for the Arm and C66x DSP, including C compilers, a DSP assembly optimizer to simplify programming and scheduling, and a debugging interface for visibility into source code execution.
Added to cart
Email notification is enabled.
Select a carrier option
NEW - You can choose different carrier options based on the quantity of parts, including full reel, custom reel, cut tape, tube or tray.
A custom reel
is a continuous length of cut tape from one reel to maintain lot- and date-code traceability, built to the exact quantity requested. Following industry standards, a brass shim connects an 18-inch leader and trailer on both sides of the cut tape for direct feeding into automated assembly machines. TI includes a reeling fee for custom reel orders.
Cut tape is a length of tape cut from a reel. TI may fulfill orders using multiple strips of cut tapes or boxes to satisfy the quantity requested.TI often ships
devices inside a box or in the tube or tray, depending on inventory availability. We pack all tapes, tubes or sample boxes according to internal electrostatic discharge and moisture-sensitivity-level protection requirements.
Select date code requirements
Ship to and currency selection
Please select your region and currency to update your cart. You will be able to select payment methods, importation responsibility and tax liability during the checkout process.