145 ps (typ) of pk-pk jitter with PRBS = 223−1 data pattern at 400 Mbps
Single +3.3 V Supply
Balanced output impedance
Output channel-to-channel skew is 35ps (typ)
Differential output voltage (VOD) is 320mV (typ) with 100Ω termination load.
LVDS receiver inputs accept LVPECL signals
LVDS input failsafe
Fast propagation delay of 2.8 ns (typ)
Receiver open, shorted, and terminated input failsafe
28 lead TSSOP package
Conforms to ANSI/TIA/EIA-644 LVDS standard
All trademarks are the property of their respective owners.
Description for the DS90LV110AT
DS90LV110A is a 1 to 10 data/clock distributor utilizing LVDS (Low Voltage Differential Signaling) technology for low power, high speed operation. Data paths are fully differential from input to output for low noise generation and low pulse width distortion. The design allows connection of 1 input to all 10 outputs. LVDS I/O enable high speed data transmission for point-to-point interconnects. This device can be used as a high speed differential 1 to 10 signal distribution / fanout replacing multi-drop bus applications for higher speed links with improved signal quality. It can also be used for clock distribution up to 200MHz.
The DS90LV110A accepts LVDS signal levels, LVPECL levels directly or PECL with attenuation networks.
The LVDS outputs can be put into TRI-STATE by use of the enable pin.
For more details, please refer to the APPLICATION INFORMATION section of this datasheet.
NEW - You can choose different carrier options based on the quantity of parts, including full reel, custom reel, cut tape, tube or tray.
A custom reel
is a continuous length of cut tape from one reel to maintain lot- and date-code traceability, built to the exact quantity requested. Following industry standards, a brass shim connects an 18-inch leader and trailer on both sides of the cut tape for direct feeding into automated assembly machines. TI includes a reeling fee for custom reel orders.
Cut tape is a length of tape cut from a reel. TI may fulfill orders using multiple strips of cut tapes or boxes to satisfy the quantity requested.TI often ships
devices inside a box or in the tube or tray, depending on inventory availability. We pack all tapes, tubes or sample boxes according to internal electrostatic discharge and moisture-sensitivity-level protection requirements.
Select date code requirements
Ship to and currency selection
Please select your region and currency to update your cart. You will be able to select payment methods, importation responsibility and tax liability during the checkout process.