|Package | Pins||WQFN (NKD) | 64|
|Operating temperature range (℃)||T (-40 to 105)|
|Package qty | Carrier:||
250 | SMALL T&R
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 2: –40°C to +105°C Ambient OperatingTemperature
- Supports Pixel Clock Frequency up to 192 MHz for up to 2K (2048x1080) Resolutions With 24-Bit Color Depth
- 1-Lane or 2-Lane FPD-Link III Interface With De-Skew Capability
- Single or Dual OpenLDI (LVDS) Transmitter
- Single Channel: Up to 96-MHz PixelClock
- Dual Channel: Up to 192-MHz Pixel Clock
- Configurable18-Bit RGB or 24-Bit RGB
- Four High-Speed GPIOs (up to 2 Mbps each)
- Adaptive Receive Equalization
- Compensates for Channel Insertion Loss of upto –15.3 dB at 1.7 GHz
- Provides Automatic Temperature andCable Aging Compensation
- SPI Control Interfaces up to 3.3 Mbps
- I2C (Master/Slave) With 1-Mbps Fast-Mode Plus
- Image Enhancement (White Balance and Dithering)
- Supports 7.1 Multiple I2S (4 Data) Channels
All trademarks are the property of their respective owners.
The DS90UB948-Q1 is a FPD-Link III deserializer which, in conjunctionwith the DS90UB949A/949/947-Q1 serializers, converts 1-lane or 2-lane FPD-Link III streams into aFPD-Link (OpenLDI) interface. The Deserializer is capable of operating over cost-effective 50-Ωsingle-ended coaxial or 100-Ω differential shielded twisted-pair (STP) cables. It recovers the datafrom one or two FPD-Link III serial streams and translates it into dual pixel FPD-Link (8 LVDS datalanes + clock) supporting video resolutions up to 2K (2048x1080) with 24-bit color depth. Thisprovides a bridge between HDMI enabled sources such as GPUs to connect to existing LVDS displays orapplication processors.
The FPD-Link III interface supports video and audio data transmission and full duplexcontrol, including I2C and SPI communication, over the same differential link. Consolidation ofvideo data and control over two differential pairs decreases the interconnect size and weight andsimplifies system design. EMI is minimized by the use of low voltage differential signaling, datascrambling, and randomization. In backward compatible mode, the device supports up to WXGA and 720presolutions with 24-bit color depth over a single differential link.
The device automatically senses the FPD-Link III channels and supplies a clock alignmentand de-skew functionality without the need for any special training patterns. This ensures skewphase tolerance from mismatches in interconnect wires such as PCB trace routing, cable pair-to-pairlength differences, and connector imbalances.
|Package qty | Carrier||
2,000 | LARGE T&R
Custom reel may be available
|Qty | Price (USD)||1ku | $6.86|