LAUNCHXL-F28027

text.skipToContent text.skipToNavigation

LAUNCHXL-F28027

C2000 Piccolo MCU F28027 LaunchPad™ development kit

$17.00

Features

Hardware features

  • USB connected isolated XDS100 JTAG debug probe for real-time debug and flash programming
  • 2x 20-pin headers/connectors with access to all device pins
  • Programmable buttons and LEDs
  • Superset TMS320F28027: 60 MHz C28x CPU, 64 KB Flash, 8 PWM Channels, 12-bit ADC, capture interface, UART, SPI, and more
  • Hardware Files are in C2000Ware at boards\LaunchPads\LAUNCHXL_F28027
 

Software features

Recommended BoosterPacks


Get started

  • Install Code Composer Studio IDE and controlSUITE
  • Connect the LaunchPad using the included mini-USB cable to a computer
  • Open a serial terminal program of your choice (Putty, HyperTerm, etc.) and configure it to access the LaunchPad virtual COM port with 115200 Baud, 8-bit data, No parity, and single stop Bit. The COM port number can be found by opening your computer’s Device Manager
    • Ensure that the XDS200v2’s second port is a serial port. Refer to the XDS100 Wiki for the configuration details
    • Ensure that S4 is in the UP position to enabled the USB<->UART channel
  • When connected to your computer, the device’s internal temperature sensor is sampled to establish a reference temperature and GPIO3 LED is lit in the nibble wide LED display (8 in hexadecimal)
  • Any increase or decrease in temperature is displayed as an increment or decrement of this binary display
  • The serial terminal will display the latest temperature reading
  • Build and load other examples in controlSUITE
  • Ask questions on the TI C2000 e2e forum

Texas Instruments  LAUNCHXL-F28027

LAUNCHXL-F28027 is a low cost evaluation and development tool for the Piccolo F2802x series in the TI MCU LaunchPad ecosystem which is compatible with various plug-on BoosterPacks. The LaunchPad provides a standardized and easy to use platform to use while developing your next application.