text.skipToContent text.skipToNavigation


Automotive 5.5-V to 65-V high side protection controller

NEW - Custom reel may be available
Inventory: 29,429

Quality information

RoHS Yes
Lead finish / Ball material SN
MSL rating / Peak reflow Level-1-260C-UNLIM
Material content View
DPPM / MTBF / Fit rate View
Qualification summary View
Ongoing reliability monitoring View
Device marking View

Packaging information

Package | Pins Package qty | Carrier Operating temperature range (°C)
VSSOP (DGS) | 10 1,000 | LARGE T&R
Custom reel may be available
-40 to 125
Package | Pins VSSOP (DGS) | 10
Package qty | Carrier 1,000 | LARGE T&R
Custom reel may be available
Operating temperature range (°C) -40 to 125
View TI packaging information

Features for the LM5060-Q1

  • Available in Automotive Grade / AEC Q-100
  • Wide operating input voltage range:
    5.5 V to 65 V
  • Functional safety capable
    • Documentation available to aid functional safety systemdesign
  • Less than 15-µA quiescent current in disabled mode
  • Controlled output rise time for safe connection of capacitive loads
  • Charge pump gate driver for external N-Channel MOSFET
  • Adjustable Undervoltage Lockout (UVLO) with hysteresis
  • UVLO Serves as second enable input for systems requiring safety redundancy
  • Programmable fault detection delay time
  • MOSFET latched off after load fault is detected
  • Active low open drain POWER GOOD (nPGD) output
  • Adjustable input Overvoltage Protection (OVP)
  • Immediate restart after overvoltage shutdown
  • 10-Lead VSSOP

All trademarks are the property of their respective owners.

Description for the LM5060-Q1

The LM5060 high-side protection controller provides intelligent control of a high-sideN-channel MOSFET during normal on/off transitions and fault conditions. In-rush current iscontrolled by the nearly constant rise time of the output voltage. A POWER GOOD output indicateswhen the output voltage reaches the input voltage and the MOSFET is fully on. Input UVLO (withhysteresis) is provided as well as programmable input OVP. An enable input provides remote on oroff control. The programmable UVLO input can be used as second enable input for safety redundancy.A single capacitor programs the initial start-up VGS fault detection delaytime, the transition VDS fault detection delay time, and the continuousover-current VDS fault detection delay time. When a detected fault conditionpersists longer than the allowed fault delay time, the MOSFET is latched off until either theenable input or the UVLO input is toggled low and then high.


Qty Price (USD)
1-99 1.992
100-249 1.745
250-999 1.224
1,000+ 0.986

Additional package qty | carrier options

Package qty | Carrier 3,500 | LARGE T&R
Inventory 9,928
Qty | Price (USD) 1ku | 0.986 1-99 1.992 100-249 1.745 250-999 1.224 1,000+ 0.986
Custom reel may be available