text.skipToContent text.skipToNavigation

MAX3221IPW ACTIVE

3-V to 5.5-V Single-Channel RS-232 Line Driver/Receiver

Same as: MAX3221IPWG4   This part number is identical to the part number listed above. You can only order quantities of the part number listed above.

Inventory: 8,148
 

Quality information

RoHS Yes
REACH Yes
Lead finish / Ball material NIPDAU
MSL rating / Peak reflow Level-1-260C-UNLIM
Material content View
DPPM / MTBF / Fit rate View
Qualification summary View
Ongoing reliability monitoring View
Device marking View

Packaging information

Package | Pins Package qty | Carrier Operating temperature range (°C)
TSSOP (PW) | 16 90 | TUBE
-40 to 85
Package | Pins TSSOP (PW) | 16
Package qty | Carrier 90 | TUBE
Operating temperature range (°C) -40 to 85
View TI packaging information

Features for the MAX3221

  • RS-232 Bus-Pin ESD Protection Exceeds
    ±15 kV Using Human Body Model (HBM)
  • Meets or Exceeds the Requirements of
    TIA/EIA-232-F and ITU V.28 Standards
  • Operates With 3-V to 5.5-V VCC Supply
  • Operates up to 250 kbps
  • One Driver and One Receiver
  • Low Standby Current: 1 µA Typical
  • External Capacitors: 4 × 0.1 µF
  • Accepts 5-V Logic Input With 3.3-V Supply
  • Alternative High-Speed Pin-Compatible
    Device (1 Mbps)
    • SNx5C3221
  • Automatic Power-Down Feature Automatically
    Disables Drivers for Power Savings

Description for the MAX3221

The MAX3221 device consists of one line driver, one line receiver with dedicated enable pin, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. These devices operate at data signaling rates up to 250 kbps and a maximum of 30-V/±s driver output slew rate.

Flexible control options for power management are available when the serial port is inactive. The automatic power-down feature functions when FORCEON is low and FORCEOFF is high. During this mode of operation, if the device does not sense a valid RS-232 signal on the receiver input, the driver output is disabled and the supply current is reduced to 1 µA. The INVALID output notifies the user if an RS-232 signal is present at the receiver input.

Pricing


Qty Price (USD)
1-99 $1.310
100-249 $1.082
250-999 $0.777
1,000+ $0.585

Additional package qty | carrier options

Package qty | Carrier 2,000 | LARGE T&R
Inventory 205,724
Qty | Price (USD) 1ku | $0.350 1-99 $0.784 100-249 $0.648 250-999 $0.465 1,000+ $0.350
Custom reel may be available