MSP430FG4617IZQWR
16-Bit Ultra-Low-Power MCU, 92KB Flash, 8KB RAM, 12-Bit ADC, Dual DAC, DMA, 3 OPAMP, 160 Seg LCD
Packaging
| Package | PIN: | JRBGA (ZQW) | 113 |
|---|---|
| Temp: | I (-40 to 85) |
| Carrier: | Cut Tape |
| Qty | Price |
|---|---|
| 1-9 | $13.11 |
| 10-24 | $12.19 |
| 25-99 | $11.76 |
| 100-249 | $10.27 |
| 250-499 | $9.77 |
| 500-749 | $9.00 |
| 750-999 | $8.07 |
| 1,000+ | $8.05 |
Features
- Low Supply-Voltage Range: 1.8 V to 3.6 V
- Ultra-Low Power Consumption
- Active Mode: 400 µA at 1 MHz, 2.2 V
- Standby Mode: 1.3 µA
- Off Mode (RAM Retention): 0.22 µA
- Five Power-Saving Modes
- Wakeup From Standby Mode in Less Than 6 µs
- 16-Bit RISC Architecture, Extended Memory, 125‑ns Instruction Cycle Time
- Three-Channel Internal DMA
- 12-Bit Analog-to-Digital Converter (ADC) With Internal Reference, Sample-and-Hold and Autoscan Feature
- Three Configurable Operational Amplifiers
- Dual 12-Bit Digital-to-Analog Converters (DACs) With Synchronization
- 16-Bit Timer_A With Three Capture/Compare Registers
- 16-Bit Timer_B With Seven Capture/Compare-With-Shadow Registers
- On-Chip Comparator
- Supply Voltage Supervisor and Monitor With Programmable Level Detection
- Serial Communication Interface (USART1), Select Asynchronous UART or Synchronous SPI by Software
- Universal Serial Communication Interface
- Enhanced UART Supports Automatic Baud-Rate Detection
- IrDA Encoder and Decoder
- Synchronous SPI
- I2C
- Serial Onboard Programming, Programmable Code Protection by Security Fuse
- Brownout Detector
- Basic Timer With Real-Time Clock (RTC) Feature
- Integrated LCD Driver up to 160 Segments With Regulated Charge Pump
- Available Family Members
- MSP430FG4616, MSP430FG4616
92KB+256B of Flash or ROM
4KB of RAM - MSP430FG4617, MSP430CG4617
92KB+256B of Flash or ROM
8KB of RAM - MSP430FG4618, MSP430CG4618
116KB+256B of Flash or ROM
8KB of RAM - MSP430FG4619, MSP430CG4619
120KB+256B of Flash or ROM
4KB of RAM
- MSP430FG4616, MSP430FG4616
Texas Instruments MSP430FG4617IZQWR
The TI MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 6 µs.
The MSP430xG461x series are microcontroller configurations with two 16-bit timers, a high-performance 12-bit ADC, dual 12-bit DACs, three configurable operational amplifiers, one universal serial communication interface (USCI), one universal synchronous/asynchronous communication interface (USART), DMA, 80 I/O pins, and a segment liquid crystal display (LCD) driver with regulated charge pump.