Wide Supply Range: +4.5 V to +36 V, ±2.25 V to ±18 V
Low Offset Voltage: ±0.2 mV
Low Offset Drift: ±0.3 µV/°C
Gain Bandwidth: 10 MHz
Low Input Bias Current: ±8 pA
Low Quiescent Current: 1.6 mA per Amplifier
Low Noise: 7 nV/√Hz
EMI and RFI Filtered Inputs
Input Range Includes the Negative Supply
Input Range Operates to Positive Supply
High Common-Mode Rejection: 120 dB
SOIC-8, VSSOP-8, SOIC-14,TSSOP-14
microPackages: Single in SC70, SOT-23, Dual in WSON-8
Description for the OPA2172
The OPA172, OPA2172 and OPA4172 (OPAx172) are a family of 36-V, single-supply, low-noiseoperational amplifiers capable of operating on supplies ranging from +4.5 V (±2.25 V) to +36 V (±18 V). This latest addition of high-voltage CMOS operational amplifiers, in conjunctionwith the OPAx171 and OPAx170, provide a family of bandwidth, noise, and power options to meet theneeds of a wide variety of applications. The OPAx172 are available in micropackages, and offer lowoffset, drift, and quiescent current. These devices also offer wide bandwidth, fast slew rate, andhigh output current drive capability. The single, dual, and quad versions all have identicalspecifications for maximum design flexibility.
Unlike most op amps, which are specified at only one supply voltage, the OPAx172 familyis specified from +4.5 V to +36 V. Input signals beyond the supply rails do not cause phasereversal. The input can operate 100 mV below the negative rail and within 2 V of the top railduring normal operation. Note that these devices can operate with full rail-to-rail input 100 mVbeyond the top rail, but with reduced performance within 2 V of the top rail.
The OPAx172 series of op amps are specified from –40°C to +125°C.
NEW - You can choose different carrier options based on the quantity of parts, including full reel, custom reel, cut tape, tube or tray.
A custom reel
is a continuous length of cut tape from one reel to maintain lot- and date-code traceability, built to the exact quantity requested. Following industry standards, a brass shim connects an 18-inch leader and trailer on both sides of the cut tape for direct feeding into automated assembly machines. TI includes a reeling fee for custom reel orders.
Cut tape is a length of tape cut from a reel. TI may fulfill orders using multiple strips of cut tapes or boxes to satisfy the quantity requested.TI often ships
devices inside a box or in the tube or tray, depending on inventory availability. We pack all tapes, tubes or sample boxes according to internal electrostatic discharge and moisture-sensitivity-level protection requirements.
Select date code requirements
Ship to and currency selection
Please select your region and currency to update your cart. You will be able to select payment methods, importation responsibility and tax liability during the checkout process.