AMPQUICKKIT-EVM
TI Precision Amplifier Quickstart Kit
AMPQUICKKIT-EVM
Overview
The TI Precision Amplifier Quickstart Kit simplifies op amp selection, design, and evaluation with samples of six op amps and an evaluation module for prototyping surface-mount ICs. The kit is the perfect starting point for your amplifier designs.
You may also be interested in TI Precision Labs, the industry’s first comprehensive online classroom for analog engineers. Browse courses
Features
The kit includes:
- Six samples: Three low-power, low-voltage amplifiers and three low-power, wide-supply amplifiers. See the table below for the complete list.
- DIP Adapter Evaluation Module (DIP-ADAPTER-EVM) for prototyping surface-mount ICs. The EVM supports the following package types: D or U (SOIC-8), PW (TSSOP-8), DGK (MSOP-8, VSSOP-8), DBV (SOT23-6, SOT23-5 and SOT23-3), DCK (SC70-6 and SC70-5) and DRL (SOT563-6).
Device | Iq (max, mA) |
Bandwidth (MHz) |
Slew Rate (V/µs) |
Offset (max, mV) |
Noise (nV/rtHz) |
Supply Range (min to max, V) |
Low-voltage OPA31x family: Best-in-class bandwidth-to-power ratio with microPower and RRIO | ||||||
---|---|---|---|---|---|---|
OPA313 | 0.06 | 1 | 0.5 | 2.5 | 25 | 1.8 to 5.5 |
OPA314 | 0.19 | 3 | 1.5 | 2.5 | 14 | 1.8 to 5.5 |
OPA316 | 0.5 | 10 | 6 | 2.5 | 11 | 1.8 to 5.5 |
Wide-supply OPA17x family: microPackage, microPower and RRO | ||||||
OPA170 | 0.145 | 1.2 | 0.4 | 1.8 | 19 | 2.7 to 36 |
OPA171 | 0.595 | 3 | 1.5 | 1.8 | 14 | 2.7 to 36 |
OPA172 | 1.8 | 10 | 10 | 1 | 6 | 4.5 to 36 |
General-purpose op amps
Order & start development
Evaluation board
AMPQUICKKIT-EVM – TI Precision Amplifier Quickstart Kit
Technical documentation
= Top documentation selected by TI
No results found. Please clear your search and try again.
View all 3
Type | Title | Date | |
---|---|---|---|
* | More literature | Precision Amplifier Quickstart Kit brochure (Rev. A) | Jan. 13, 2015 |
More literature | AMPQUICKKIT-EVM EU Declaration of Conformity (DoC) | Jan. 02, 2019 | |
User guide | DIP Adapter EVM Usage Instructions (Rev. A) | Feb. 09, 2017 |
Related design resources
Hardware development
EVALUATION BOARD
DIP-ADAPTER-EVM
—
DIP adapter evaluation module
Reference designs
REFERENCE DESIGN
TIPD114
—
Data Acquisition at 1KHz AC, 1mW, 18bit, 1Msps Reference Design
TIPD116
—
Data Acquisition Block for ECG Systems, discrete LEAD I ECG implementation Reference Design
TIPD128
—
Capacitive Load Drive Verified Reference Design Using an Isolation Resistor
TIPD131
—
Single-Ended Input to Differential Output Conversion Circuit Reference Design
TIPD145
—
Single Supply Op Amp with Drive to True GND
TIPD148
—
Level Translation: Dual to Single Supply Amp, ±15V to 5V
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.