Home
Design resources

FUSION_DIGITAL_POWER_DESIGNER

Digital Power Software

Downloads

FUSION_DIGITAL_POWER_DESIGNER

Downloads

Overview

Fusion Digital Power™ graphical user interface (GUI) software is used to configure and monitor select Texas Instruments digital power controllers and sequencer/health monitors. The application uses the PMBus protocol to communicate with the device over serial bus by way of a TI USB adapter.

Features

Some of the tasks you can perform with the GUI include:

  • Turn on or off the power supply output, either through the hardware control line or the PMBus OPERATION command
  • Monitor real-time data. Items such as input voltage, output voltage, output current, temperature, and warnings/faults are continuously monitored and displayed by the GUI.
  • Configure the control law accelerator (CLA) coefficients through an interactive design tool
  • Configure common operating characteristics such as Vout, warning and fault thresholds, and switching frequency
Download View video with transcript Video

Downloads

Application software & framework

FUSION_DIGITAL_POWER_DESIGNER — Digital Power Software

Supported products & hardware
Download
IDE, configuration, compiler or debugger

TI Fusion API (Rev. F) — SLVC459F.ZIP (106976KB)

lock = Requires export approval (1 minute)
Supported products & hardware
lock Download
Driver or library

TI-USB Serial-Adapter-API and README file — SLVC460.ZIP (3993KB)

Supported products & hardware
Download

Supported products & hardware

Buck controllers (external switch)
TPS40400 — 3-V to 20-V, 30-A, synchronous buck controller with PMBus™, including Telemetry TPS40422 — Dual Output or Multiphase Synchronous Buck Controller with PMBus TPS40425 — Dual Output, 2-Phase, Stackable PMBUS Synchronous Buck Driverless Controller TPS40428 — Dual Output, 2-Phase, Stackable PMBus Synchronous Buck Driverless Controller TPS53622 — VR13 Dual-Channel D-CAP+™ 2+0/1+1 Step-Down Controller With NVM and PMBus TPS53647 — 4-Phase, D-CAP+TM Step-Down Buck Controller with NVM and PMBus Interface for ASIC TPS53659 — 4+1/3+2 Dual-Channel VR13 D-CAP+™ Step-Down Multiphase Controller With NVM and PMBus TPS53667 — 6-Phase, D-CAP+ step-down driverless buck controller with NVM and PMBus interface for ASIC TPS53676 — Dual-channel D-CAP+, dual-channel (N+M<= 7 phases) step-down, multiphase controller with AVSBus TPS53679 — Dual-Channel 6+1/5+2 VR13 D-CAP+™ Step-Down Multiphase Controller With NVM and PMBus TPS53681 — Dual-Channel 6+2/5+3 D-CAP+TM Multiphase Step-Down Controller with PMBus and NVM TPS536C7 — Dual-channel D-CAP+™, PMBus (N+M ≤ 12 phases) step-down, multiphase PWM controller
Buck converters (integrated switch)
TPS53915 — 1.5-V to 18-V, 12-A synchronous SWIFT™ buck converter with PMBus TPS544B20 — 4.5-V to 18-V, 20-A synchronous SWIFT™ buck converter with PMBus programmability and monitoring TPS544C20 — 4.5-V to 18-V, 30-A synchronous SWIFT™ buck converter with PMBus programmability and monitoring TPS544C26 — 4-V to 16-V, 35-A SVID and I²C synchronous step-down converter TPS546D24A — 2.95-V to 16-V, stackable 40-A synchronous SWIFT™ buck converter with pin-strapping and PMBus TPS548A20 — 1.5-V to 20-V, 15-A synchronous SWIFT™ buck converter TPS549A20 — 1.5-V to 20-V, 15-A synchronous SWIFT™ buck converter with PMBus
Buck modules (integrated inductor)
PTD08A006W — 6A, 4.75V to 14V, Non-Isolated, Digital PowerTrain Module PTD08A010W — 10A, 4.75V to 14V, Non-Isolated, Digital PowerTrain Module PTD08A015W — 15A, 4.75 V to 14 V Input, Non-Isolated, Digital PowerTrain Module PTD08A020W — 20A, 4.75V to 14V, Non-Isolated, Digital PowerTrain Module PTD08D210W — Dual 10A, 4.75V to 14V, Non-Isolated, Digital PowerTrain Module TPSM831D31 — 8V-14V input, 120A + 40A dual output PMBus module with AVS and monitoring TPSM846C23 — 4.5V to 15V Input, 0.35V to 2.0V Output, 35A PMBus Power Module
Digital power control drivers & powertrain modules
UCD7230A — 15.5 V, 2 MHz, 4 A synchronous buck MOSFET™ driver compatible with UCD92xx and improved power on UCD7231 — Digital Control Compatible Synchronous Buck Gate Driver with Current Sense and Fault Protection UCD7232 — Digital Control Compatible Synchronous-Buck Gate Driver with Current Sense and Fault Protection UCD7242 — Digital Dual Synchronous Buck Power Driver UCD74106 — Digital Synchronous Buck Power Driver
Digital power isolated controllers
UCD3020 — Fully Programmable Digital Power Controller with up to Two Regulated Outputs and Six DPWM Outputs UCD3028 — Fully Programmable Digital Power Controller with up to Two Regulated Outputs and Eight DPWM Outputs UCD3040 — Fully Programmable Digital Power Controller with Four Feedback Loops and Eight DPWM Outputs UCD7230 — 15.5 V, 2 MHz, 4 A synchronous buck MOSFET™ driver compatible with UCD92xx digital PWM controllers UCD9220 — 2MHz, 2 rail, 4 phase digital PWM buck controller UCD9224 — 2 MHz, 2 rail, 4 phase digital PWM buck controller with improved sequencing UCD9240 — Digital Point of Load System Controller UCD9246 — 2MHz, 4 rail, 6 phase digital PWM buck controller UCD9248 — Digital PWM system controller
Sequencers
UCD90120 — 12-Channel Sequencer and System Health Monitor UCD90120A — 12-Rail Power Supply Sequencer and Monitor with ACPI Support UCD90124 — 12-Rail Sequencer and System Health Controller with Fan Control UCD90124A — 12-Rail Sequencer and System Health Monitor with Fan Control and ACPI Support UCD90160 — 16-Rail Power Supply Sequencer with ACPI Support UCD90160A — 16-Rail PMBus Power Supply Sequencer and System Manager with ACPI Support UCD90240 — 24-Rail PMBus Power Sequencer and Power Manager UCD90320 — 32-Rail PMBus Power Sequencer and System Manager UCD9090 — 10-Channel Sequencer and System Health Monitor UCD9090-Q1 — Automotive 10-Channel Sequencer and System Health Monitor UCD9090A — 10-Rail Power Supply Sequencer and Monitor With ACPI Support UCD90910 — 10-Rail Sequencer and System Health Monitor with Integrated 10-Channel Fan Controller
Evaluation board
TPS40422EVM-091 — TPS40422 Dual Output or Multiphase Synchronous Buck Controller Evaluation Module UCD3138OL40EVM-032 — UCD3138 Programmable Digital Power Controller Open Loop Evaluation Module (40-pin version) UCD3138OL64EVM-031 — UCD3138 Programmable Digital Power Controller Open Loop Evaluation Module (64-pin version)
Daughter card
UCD3138CC64EVM-030 — UCD3138 Programmable Digital Power Controller Control Card Evaluation Module

Related design resources

Software development

APPLICATION SOFTWARE & FRAMEWORK
FUSION_MFR_GUI — Fusion Digital Power Manufacturing Tool
DRIVER OR LIBRARY
FUSION_DIGITAL_POWER_API — Fusion Digital Power - API

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support.

Videos