LM3463EVM

LM3463EVM 評估模組

LM3463EVM

立即訂購

概覽

The LM3463 is a 6-channel linear LED driver with Dynamic Headroom Control (DHC) designed to drive six strings of high brightness LEDs at maximum supply voltage up to 95V. Each output channel of the LM3463 evaluation board is designed to deliver 200 mA of LED driving current. The LED turn on voltage is set to 48V by default, thus the board is able to deliver up to 57.6W total output power. The six output channels are divided into 4 individual groups to facilitate average LED current control by means of PWM dimming. The PWM dimming control interface of the LM3463 can accept standard TTL level PWM signals, analog voltage or serial data to control the dimming duty of the four LED groups individually. The analog dimming control interface accepts an analog control voltage in the range from 0V to 2.5V to adjust the reference voltage of the linear current regulators, which enables true LED current adjustment. This evaluation board is designed to be connected to an external primary power supply. Using three connection wires, the VIN, GND and VFB, the dynamic Headroom Control (DHC) circuit of the LM3463 adjusts the output voltage of the primary power supply to maximize system efficiency.

特點
  • Input Voltage Range: 12V to 95V
  • LED Turn On Voltage: 48V Nominal forward
  • Voltage of LED String: 42V
  • Output Current per Channel: 200 mA
  • System Clock Frequency: 246 kHz
  • DHC Cut-Off Frequency: 0.1Hz
  • Mode of dimming control: Direct PWM Mode
照明 LED 驅動器
LM3463 具動態空餘空間控制的 6 通道高電壓定電流 LED 驅動器
下載 觀看有字幕稿的影片 影片

訂購並開始開發

開發板

LM3463EVM — LM3463EVM Evaluation Module

支援產品和硬體
有庫存
限制:
TI.com 上缺貨
TI.com 無法提供

LM3463EVM LM3463EVM Evaluation Module

close
版本: null
發行日期:
適用 TI 的評估品項標準條款與條件。

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 下載最新的英文版本 日期
證書 LM3463EVM EU Declaration of Conformity (DoC) 2019/1/2
使用指南 AN-2255 LM3463 Evaluation Board (Rev. A) 2013/5/3

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援