PMP10478
適用於平板電腦和智慧型手機的 85 至 265V AC 輸入 5V@30W 雙埠充電器參考設計
PMP10478
概覽
This reference design is capable of charging two devices at 2.5A each with over 82% efficiency. The UCC24610 synchronous rectifier controller and CSD17312Q5 FET reduce the rectifier loss and provide high efficiency with a minimal increase in cost. The TPS2561A provides accurate and independent current limit protection for each port. The TPS2513 communicates with the mobile device under charge to ensure that the charger is accepted by most phone and tablet models. This compact design consumes a volume of only 2.15" x 1.7" x 1.0".
特點
- Capable of charging two devices at the same time
- AC/DC designed for 30W total capacity
- Synchronous rectification reduces losses and provides good efficiency (>82%)
- No load (Standby) power consumption is less than 150mW
| 輸出電壓選項 | PMP10478.1 |
|---|---|
| Vin (最小值) (V) | 85 |
| Vin (最大值) (V) | 265 |
| Vout (Nom) (V) | 5 |
| Iout (最大) (A) | 6 |
| 輸出功率 (W) | 30 |
| 隔離式/非隔離式 | Isolated |
| 輸入類型 | AC |
| 拓撲結構 | Flyback- DCM^Flyback- Quasi Resonant^Flyback- Synchronous |
已開發完全組裝的電路板，僅供測試與性能驗證，且為非賣品。
設計檔案與產品
設計檔案
下載立即可用的系統檔案以加速您的設計流程。
產品
設計與潛在替代方案中包括 TI 產品。
技術文件
=
TI 所選的重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 測試報告 | PMP10478 Test Results | 2015/2/6 |