TPS2421-1EVM-02
TPS2421-1 熱插拔控制器評估模組
TPS2421-1EVM-02
概覽
The TPS2421-1EVM-02 is a 3-V to 18-V module using the TPS2421-1 hot swap controller with integrated MOSFET. At power on, the output is power limited to control inrush current and protect the MOSFET. On an over-current condition, the controller interrupts power to the load at high speed and signals load status. Operating current, fault current and fault timer settings are hardware programmable.
特點
- 3V to 18V Operation
- Controlled Inrush Current
- Fast Circuit Breaker Control
- Hardware Programmable
- LED status display
- A Slide Switch Controls the ENABLE Signal
- The Area Under the TPS2421-1 is Copper Pour with Vias to the Internal Ground to take Advantage of the Power Pad Package
- A Transorb is On-Board for Over-Voltage Input Protection
- A Common Diode at the Output Prevents a Negative Spike if the Load is Removed While Powered On
- Programmable IMON Voltage Readout of the Output Current is Preset to 0.31 V / A
- Test Points Available to Monitor Circuit Operation
eFuses (integrated hot swaps)
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| 資料表 | TPS2421-x 5-A, 20-V Integrated FET Hot Swap datasheet (Rev. K) | PDF | HTML | 2019/5/15 | |||
| 證書 | TPS2421-1EVM-02 EU Declaration of Conformity (DoC) | 2019/1/2 | ||||
| 使用指南 | Using the TPS2420, TPS2421-1, TPS2421-2 | 2009/1/6 |