AWRL6432AOP
- FMCW Transceiver
- Integrated PLL, transmitter, receiver, baseband and ADC
- 57GHz - 64GHz coverage with 7GHz continuous bandwidth
- Integrated 3 receive channels and 2 transmit channels Antennas-On-Package (AOP)
- Range typically up to 25m
- FMCW operation
- 5MHz IF bandwidth, real-only Rx channels
- Ultra-accurate chirp engine based on fractional-N PLL
- Per transmitter binary phase shifter
- Processing elements
- Arm M4F core with single precision FPU (160MHz)
- TI Radar Hardware Accelerator (HWA 1.2) for FFT, log magnitude, and CFAR operations (80MHz)
- Supports multiple low-power modes
- Idle mode and deep sleep mode
- Power management
- 1.8V and 3.3V IO support
- Built-in LDO network for enhanced PSRR
- BOM-Optimized and Power-Optimized modes
- One or two power rails for 1.8V IO mode, two or three power rails for 3.3V IO mode
- Built-in calibration and self-test
- Built-in Firmware (ROM)
- Self-Contained on chip calibration system
- Host Interface
- UART
- CAN-FD
- SPI
- LIN
- RDIF (Radar Data Interface) for raw ADC sample capture
- Other interfaces available to user application
- QSPI
- I2C
- JTAG
- GPIOs
- PWM Interface
- Internal memory
- 1MB of On-Chip RAM
- Configurable L3 shared memory for Radar Cube
- Data and Code RAM of (512/640/768KB)
- Functional Safety-Compliant Targeted
- Developed for functional safety applications
- Hardware integrity up to ASIL-B targeted
- AEC Q-100 Qualified
- Easy hardware design
- 0.5-mm pitch, 101-BGA 10.9mm× 6.7mmAMY package for easy assembly and low-cost PCB design
- Small solution size
- Clock source
- 40.0MHz crystal for primary clock
- Supports externally driven clock (Square/Sine) at 40.0MHz
- 32kHz internal oscillator for low power operations
- Supports temperature operating range
- Operating junction temperature range: –40°C to 125°C
The AWRL6432AOP mmWave Sensor device is an Antenna-on-Package (AOP) device that is an evolution within integrated single chip mmWave sensor based on FMCW radar technology. The device is capable of operation in the 57GHz to 63.9GHz band and is partitioned into mainly four power domains:
- RF/Analog Sub-System: This block includes all the RF and Analog components required to transmit and receive the RF signals.
- Front-End Controller sub-System (FECSS): FECSS contains processor ARM Cortex M3, responsible for radar front-end configuration, control, and calibration.
- Application Sub-System (APPSS): APPSS is where the device implements a user programmable ARM Cortex M4 allowing for custom control and automotive interface applications. Top Sub-System (TOPSS) is part of the APPSS power domain and contains the clocking and power management sub-blocks.
- Hardware Accelerator (HWA): HWA block supplements the APPSS by offloading common radar processing such as FFT, Constant False Alarm rate (CFAR), scaling, and compression.
AWRL6432AOP is specifically designed to have separate control for each of the above-mentioned power domains to control states (power ON or OFF) based on use case requirements. The device also features the capability to exercise various low-power states like sleep and deep sleep, where low-power sleep mode is achieved by clock gating and by turning off some of the internal IP blocks of the device. The device also provides the option of keeping some contents of the device, like Application image or RF profile retained in such scenarios.
Additionally, the device is built with TI’s low power 45nm RF CMOS process and enables unprecedented levels of integration in an extremely small form factor. AWRL6432AOP is designed for low power, self-monitored, ultra-accurate radar systems in the automotive space for applications like one row life presence detection, intrusion detection and exterior intrusion monitoring / radar DVR.
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | AWRL6432AOP Single-Chip 57 to 64GHz Automotive Radar Sensor with Antenna On Package (AOP) 数据表 | PDF | HTML | 2024年 5月 6日 | ||
* | 勘误表 | AWRL6432AOP Device Silicon Errata | PDF | HTML | 2023年 12月 6日 | ||
应用手册 | xWRL6432AOP 的发送器退避和接收器增益建议 | PDF | HTML | 英语版 | PDF | HTML | 2024年 5月 3日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
AWRL6432AOPEVM — AWRL6432AOP 单芯片 60GHz 封装天线 (AoP) 毫米波传感器评估模块
xWRL6432AOPEVM 是一款基于 FR4 的易用型低成本评估板,适用于 xWRL6432AOP 毫米波传感器件,可独立运行并直接连接到 DCA1000EVM 以进行原始 ADC 采集和信号处理开发。此 EVM 包含开始为片上硬件加速器和低功耗 ARM Cortex® M4F 处理器开发软件所需的一切资源。
MMWAVE-L-SDK — 适用于 xWRL1432 和 xWRL6432 的毫米波软件开发套件 (SDK)
MMWAVE-L-SDK 是统一的毫米波检测产品系列用软件平台,不仅设置简单,还可实现开箱即用的快速评估和开发。MMWAVE-L-SDK 是客户应用开发所需的低功耗基础软件包,包括构建块、演示和示例。
汽车类演示应用包括为存在和运动、车内乘员检测、脚踢开启和泊车辅助量身定制的应用。
工业类演示应用包括为存在和运动、手势识别、人员跟踪和分类、液位感应等量身定制的应用。
CCSTUDIO — Code Composer Studio 集成式开发环境 (IDE)
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It comprises a suite of tools used to develop and debug embedded applications. Code Composer Studio is available for download across Windows®, Linux® and macOS® (...)
支持的产品和硬件
此设计资源支持这些类别中的大部分产品。
查看产品详情页,验证是否能提供支持。
-
parametric-filter MSP430 微控制器 -
parametric-filter C2000 实时微控制器 -
parametric-filter 基于 Arm 的微控制器 -
parametric-filter 数字信号处理器 (DSP) -
parametric-filter 基于 Arm 的处理器 -
parametric-filter 信号调节器 -
parametric-filter 毫米波雷达传感器 -
parametric-filter Zigbee 产品 -
parametric-filter Wi-Fi 产品 -
parametric-filter Thread 产品 -
parametric-filter 其他无线技术 -
parametric-filter 低于 1GHz 产品 -
parametric-filter 多协议产品 -
parametric-filter 蓝牙产品 -
parametric-filter 数字电源隔离式控制器
CCSTUDIO-THEIA — Code Composer Studio™ integrated development environment (IDE) Theia
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It comprises a suite of tools used to develop and debug embedded applications. Code Composer Studio is available for download across Windows®, Linux® and macOS® (...)
支持的产品和硬件
产品
Arm Cortex-M0+ MCU
Sub-1GHz 无线 MCU
汽车类无线连接产品
低功耗 2.4GHz 产品
其他无线产品
MSP430 微控制器
C2000 实时微控制器
Arm Cortex-R MCU
基于 Arm 的处理器
汽车毫米波雷达传感器
工业毫米波雷达传感器
硬件开发
评估板
软件
软件开发套件 (SDK)
MMWAVE-STUDIO — mmWave Studio
MMWAVE-STUDIO 提供线性调频脉冲设计评估和原型验证功能,并可对我们的雷达器件高级功能进行实验。
MMWAVE-STUDIO 适用于直接收集 ADC 数据并微调低电平线性调频脉冲参数的高级用户。但不适用于雷达演示的典型评估。
MMWAVE-STUDIO 提供了 ADC 数据的基本后处理和可视化,以及基于 MATLAB® (...)
RADAR-ACADEMY — mmWave Radar Academy
支持的产品和硬件
产品
汽车毫米波雷达传感器
工业毫米波雷达传感器
硬件开发
评估板
软件
设计工具
固件
软件开发套件 (SDK)
IDE、配置、编译器或调试器
RADAR-TOOLBOX — Radar evaluation and development support package with example projects, documentation and tools
支持的产品和硬件
产品
工业毫米波雷达传感器
汽车毫米波雷达传感器
硬件开发
评估板
软件
软件开发套件 (SDK)
封装 | 引脚 | 下载 |
---|---|---|
FCCSP (AMY) | 101 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。