125Ω typical on-state resistance for 15V operation
Switch on-state resistance matched to within 5Ω over 15V signal-input range
On-state resistance flat over full peak-to-peak signal range
High on or off output-voltage ratio: 80dB typical at fis = 10kHz,
RL = 1kΩ
High degree of linearity: <0.5% distortion
typical at fis = 1kHz, Vis = 5Vp-p VDD – VSS ≥ 10V,
RL = 10kΩ
Extremely low off-state switch leakage, resulting
in very low offset current and high effective off-state resistance: 10 pA
typical at VDD – VSS = 10V, TA = 25°C
Extremely high control input impedance (control circuit isolated from signal circuit):
1012Ω typical
Low crosstalk between switches: –50dB typical at
fis = 8MHz, RL = 1kΩ
Matched control-input to signal-output
capacitance: reduces output signal transients