SNAS852 june   2023 CDCE6214Q1TM

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Revision History
  6. 5 Description (cont.)
  7. 6 Device Comparison
  8. 7 Pin Configuration and Functions
  9. 8 Specifications
    1. 8.1  Absolute Maximum Ratings
    2. 8.2  ESD Ratings
    3. 8.3  Recommended Operating Conditions
    4. 8.4  Thermal Information
    5. 8.5  EEPROM Characteristics
    6. 8.6  Reference Input, Single-Ended Characteristics
    7. 8.7  Reference Input, Differential Characteristics
    8. 8.8  Reference Input, Crystal Mode Characteristics
    9. 8.9  General-Purpose Input Characteristics
    10. 8.10 Triple Level Input Characteristics
    11. 8.11 Logic Output Characteristics
    12. 8.12 Phase Locked Loop Characteristics
    13. 8.13 Closed-Loop Output Jitter Characteristics
    14. 8.14 Input and Output Isolation
    15. 8.15 Buffer Mode Characteristics
    16. 8.16 PCIe Spread Spectrum Generator
    17. 8.17 LVCMOS Output Characteristics
    18. 8.18 LP-HCSL Output Characteristics
    19. 8.19 LVDS Output Characteristics
    20. 8.20 Output Synchronization Characteristics
    21. 8.21 Power-On Reset Characteristics
    22. 8.22 I2C-Compatible Serial Interface Characteristics
    23. 8.23 Timing Requirements, I2C-Compatible Serial Interface
    24. 8.24 Power Supply Characteristics
    25. 8.25 Typical Characteristics
  10. 9 Parameter Measurement Information
    1. 9.1 Reference Inputs
    2. 9.2 Outputs
    3. 9.3 Serial Interface
    4. 9.4 PSNR Test
    5. 9.5 Clock Interfacing and Termination
      1. 9.5.1 Reference Input
      2. 9.5.2 Outputs
  11. 10Detailed Description
    1. 10.1 Overview
    2. 10.2 Functional Block Diagram
    3. 10.3 Feature Description
      1. 10.3.1 Reference Block
        1. 10.3.1.1 Zero Delay Mode, Internal and External Path
      2. 10.3.2 Phase-Locked Loop (PLL)
        1. 10.3.2.1 PLL Configuration and Divider Settings
        2. 10.3.2.2 Spread Spectrum Clocking
        3. 10.3.2.3 Digitally-Controlled Oscillator and Frequency Increment or Decrement - Serial Interface Mode and GPIO Mode
      3. 10.3.3 Clock Distribution
        1. 10.3.3.1 Glitchless Operation
        2. 10.3.3.2 Divider Synchronization
        3. 10.3.3.3 Global and Individual Output Enable
      4. 10.3.4 Power Supplies and Power Management
      5. 10.3.5 Control Pins
    4. 10.4 Device Functional Modes
      1. 10.4.1 Operation Modes
        1. 10.4.1.1 Fall-Back Mode
        2. 10.4.1.2 Pin Mode
        3. 10.4.1.3 Serial Interface Mode
    5. 10.5 Programming
      1. 10.5.1 I2C Serial Interface
      2. 10.5.2 EEPROM
        1. 10.5.2.1 EEPROM - Cyclic Redundancy Check
        2. 10.5.2.2 Recommended Programming Procedure
        3. 10.5.2.3 EEPROM Access
          1. 10.5.2.3.1 Register Commit Flow
          2. 10.5.2.3.2 Direct Access Flow
        4. 10.5.2.4 Register Bits to EEPROM Mapping
  12. 11Application and Implementation
    1. 11.1 Application Information
    2. 11.2 Typical Application
      1. 11.2.1 Design Requirements
      2. 11.2.2 Detailed Design Procedure
      3. 11.2.3 Application Curves
    3. 11.3 Power Supply Recommendations
      1. 11.3.1 Power-Up Sequence
      2. 11.3.2 Decoupling
    4. 11.4 Layout
      1. 11.4.1 Layout Guidelines
      2. 11.4.2 Layout Examples
  13. 12Device and Documentation Support
    1. 12.1 Device Support
      1. 12.1.1 Development Support
      2. 12.1.2 Device Nomenclature
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 Support Resources
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 Glossary
  14. 13Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

10.5.1 I2C Serial Interface

The CDCE6214Q1TM ultra-low power clock generator provides an I2C-compatible serial interface for register and EEPROM access. The device is compatible to standard-mode I2C at 100 kHz and the fast-mode I2C at 400-kHz clock frequency.

  1. In fall-back mode, I2C target address = 67h.
  2. In other modes, I2C target address = 68h when the interface is available. By default, the interface is not available.
  3. The LSB bit of the device can be programmed in the EEPROM. For example, if I2C_A0 is programmed H in Page 0 of EEPROM, setting HW_SW_CTRL=0 would set I2C address as 69h.
  4. Two devices with EEPROM + 1 device in fall-back mode can be used on the same I2C bus with addresses 67h, 68h and 69h.
Table 10-19 I2C-Compatible Serial Interface, Target Address Byte(1)(2)
76543210
Target Address [6:0]R/W# Bit
(1) The target address consists of two sections. The hardwired MSBs A[6:1] and the software-selectable LSBs A[0].
(2) The R/W# bit indicates a read (1) or a write (0) transfer.
Table 10-20 I2C-Compatible Serial Interface, Programmable Target Address(1)(2)
A6A5A4A3A2A1A0HW_SW_SELDESCRIPTION
1100111MIDFall-back Mode
110100I2C_A0LOWEEPROM Page 0
110100I2C_A0HIGHEEPROM Page 1
(1) In EEPROM Page 0, Serial Interface is not available. Device is configured in Pin Mode.
(2) In EEPROM Page 1, Serial Interface is not available. Device is configured in Pin Mode.

The serial interface uses the following protocol as shown in Figure 10-10. The target address is followed by a word-wide register offset and a word-wide register value.


GUID-20230605-SS0I-GMKL-RW4X-ZZP03FVTLFSR-low.svg
Figure 10-10 I2C-Compatible Serial Interface, Supported Protocol