SNVSA46B June   2014  – January 2018 LM46001

PRODUCTION DATA.  

  1. Features
  2. Applications
  3. Description
    1.     Device Images
      1.      Simplified Schematic
      2.      Radiated Emission Graph VOUT = 3.3 V, VIN = 24 V, FS= 500 kHz, IOUT = 1 A
  4. Revision History
  5. Pin Configuration and Functions
    1.     Pin Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Switching Characteristics
    8. 6.8 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  Fixed-Frequency, Peak-Current Mode Controlled Step-Down Regulator
      2. 7.3.2  Light Load Operation
      3. 7.3.3  Adjustable Output Voltage
      4. 7.3.4  Enable (ENABLE)
      5. 7.3.5  VCC, UVLO, and BIAS
      6. 7.3.6  Soft-Start and Voltage Tracking (SS/TRK)
      7. 7.3.7  Switching Frequency (RT) and Synchronization (SYNC)
      8. 7.3.8  Minimum ON-Time, Minimum OFF-Time and Frequency Foldback at Dropout Conditions
      9. 7.3.9  Internal Compensation and CFF
      10. 7.3.10 Bootstrap Voltage (CBOOT)
      11. 7.3.11 Power Good (PGOOD)
      12. 7.3.12 Overcurrent and Short-Circuit Protection
      13. 7.3.13 Thermal Shutdown
    4. 7.4 Device Functional Modes
      1. 7.4.1 Shutdown Mode
      2. 7.4.2 Stand-by Mode
      3. 7.4.3 Active Mode
      4. 7.4.4 CCM Mode
      5. 7.4.5 Light Load Operation
      6. 7.4.6 Self-Bias Mode
  8. Applications and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1  Custom Design With WEBENCH® Tools
        2. 8.2.2.2  Output Voltage Setpoint
        3. 8.2.2.3  Switching Frequency
        4. 8.2.2.4  Input Capacitors
        5. 8.2.2.5  Inductor Selection
        6. 8.2.2.6  Output Capacitor Selection
        7. 8.2.2.7  Feed-Forward Capacitor
        8. 8.2.2.8  Bootstrap Capacitors
        9. 8.2.2.9  VCC Capacitor
        10. 8.2.2.10 BIAS Capacitors
        11. 8.2.2.11 Soft-Start Capacitors
        12. 8.2.2.12 Undervoltage Lockout Setpoint
        13. 8.2.2.13 PGOOD
      3. 8.2.3 Application Curves
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
      1. 10.1.1 Compact Layout for EMI Reduction
      2. 10.1.2 Ground Plane and Thermal Considerations
      3. 10.1.3 Feedback Resistors
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Development Support
        1. 11.1.1.1 Custom Design With WEBENCH® Tools
    2. 11.2 Receiving Notification of Documentation Updates
    3. 11.3 Community Resources
    4. 11.4 Trademarks
    5. 11.5 Electrostatic Discharge Caution
    6. 11.6 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Application Curves

See Table 2 for bill of materials for each VOUT and FS combination. Unless otherwise stated, application performance curves were taken at TA = 25°C.
LM46001 Sch_BOM_3.3V500k.gif
VOUT = 3.3 V FS = 500 kHz VIN = 24 V
Figure 47. BOM for VOUT = 3.3 V FS = 500 kHz
LM46001 C012_Reg_46001_3p3V500k.png
VOUT = 3.3 V FS = 500 kHz
Figure 49. Output Voltage Regulation
LM46001 24VIN_3p3VO_500k_100mATO1A.gif
VOUT = 3.3 V FS = 500 kHz VIN = 24 V
Figure 51. Load Transient Between 0.1 A and 1 A
LM46001 Sch_BOM_5V500k.gif
VOUT = 5 V FS = 500 kHz VIN = 24 V
Figure 53. BOM for VOUT = 5 V, FS = 500 kHz
LM46001 C013_Reg_46001_5V500k.png
VOUT = 5 V FS = 500 kHz
Figure 55. Output Voltage Regulation
LM46001 24VIN_5VO_500k_100mATO1A.gif
VOUT = 5 V FS = 500 kHz VIN = 24 V
Figure 57. Load Transient Between 0.1 A and 1 A
LM46001 Sch_BOM_5V200k.gif
VOUT = 5 V FS = 200 kHz VIN = 24 V
Figure 59. BOM for VOUT = 5 V, FS = 200 kHz
LM46001 C014_Reg_46001_5V200k.png
VOUT = 5 V FS = 200 kHz
Figure 61. Output Voltage Regulation
LM46001 24VIN_5VO_200k_100mATO1A.gif
VOUT = 5 V FS = 200 kHz VIN = 24 V
Figure 63. Load Transient Between 0.1 A and 1 A
LM46001 Sch_BOM_5V1M.gif
VOUT = 5 V FS = 1 MHz VIN = 24 V
Figure 65. BOM for VOUT = 5 V, FS = 1 MHz
LM46001 C015_Reg_46001_5V1M.png
VOUT = 5 V FS = 1 MHz
Figure 67. Output Voltage Regulation
LM46001 24VIN_5VO_1M_100mATO1A.gif
VOUT = 5 V FS = 1 MHz VIN = 24 V
Figure 69. Load Transient Between 0.1 A and 1 A
LM46001 Sch_BOM_12V500k.gif
VOUT = 12 V FS = 500 kHz VIN = 24 V
Figure 71. BOM for VOUT = 12 V, FS = 500 kHz
LM46001 C017_Reg_46001_12V500k.png
VOUT = 12 V FS = 500 kHz
Figure 73. Output Voltage Regulation
LM46001 24VIN_12VO_500k_100mATO1A.gif
VOUT = 12 V FS = 500 kHz VIN = 24 V
Figure 75. Load Transient Between 0.1 A and 1 A
LM46001 Sch_BOM_24V500k.gif
VOUT = 24 V FS = 500 kHz VIN = 48 V
Figure 77. BOM for VOUT = 24 V, FS = 500 kHz
LM46001 C018_Reg_46001_24V500k.png
VOUT = 24 V FS = 500 kHz
Figure 79. Output Voltage Regulation
LM46001 48VIN_24VO_500k_100mATO1A.gif
VOUT = 24 V FS = 500 kHz VIN = 48 V
Figure 81. Load Transient Between 0.1 A and 1 A
LM46001 3p3VO_500kThetaJA20CpW.png
VOUT = 3.3 V FS = 500 kHz RθJA = 20 °C/W
Figure 83. Derating Curve with RθJA = 20°C/W
LM46001 5VO_200kThetaJA20CpW.png
VOUT = 5 V FS = 200 kHz RθJA = 20 °C/W
Figure 85. Derating Curve with RθJA = 20°C/W
LM46001 46001_3p3V_500kHz_FreqPFM.png
VOUT = 3.3 V FS = 500 kHz
Figure 87. Switching Frequency vs IOUT in PFM Operation
LM46001 24VIN_3V3_500k_1A_CCM.gif
VOUT = 3.3 V FS = 500 kHz IOUT = 1 A
Figure 89. Switching Waveform in CCM Operation
LM46001 24VIN_3V3_500k_10mA_PFM.gif
VOUT = 3.3 V FS = 500 kHz IOUT = 10 mA
Figure 91. Switching Waveform in PFM Operation
LM46001 24VIN_3p3VO_500k_500mA.gif
VIN = 24 V VOUT = 3.3 V RLOAD = 6.6 Ω
Figure 93. Start-up Into Half Load with Internal Soft-Start Rate
LM46001 24VIN_3p3VO_500k_PREBIAS_1V.gif
VIN = 24 V VOUT = 3.3 V RLOAD = Open
Figure 95. Start-up Into 1-V Pre-biased Voltage
LM46001 12TO48V_3V3_500k_1A_1V1us.gif
VOUT = 3.3 V FS = 500 kHz IOUT = 1 A
Figure 97. Line Transient: VIN Transitions Between 12 V and 48 V
LM46001 24VIN_3p3VO_500k_SHORT_RECOVERY.gif
VOUT = 3.3 V FS = 500 kHz VIN = 24 V
Figure 99. Short-Circuit Protection and Recover
LM46001 C002_Eff_46001_3p3V500k.png
VOUT = 3.3 V FS = 500 kHz
Figure 48. Efficiency
LM46001 C022_DO_46001_3p3V500k.png
VOUT = 3.3 V FS = 500 kHz
Figure 50. Dropout Curve
LM46001 24V_3p3VO_500kThetaJA.png
VOUT = 3.3 V FS = 500 kHz VIN = 24 V
Figure 52. Derating Curve
LM46001 C003_Eff_46001_5V500k.png
VOUT = 5 V FS = 500 kHz
Figure 54. Efficiency
LM46001 C023_DO_46001_5V500k.png
VOUT = 5 V FS = 500 kHz
Figure 56. Dropout Curve
LM46001 24V_5VO_500kThetaJA.png
VOUT = 5 V FS = 500 kHz VIN = 24 V
Figure 58. Derating Curve
LM46001 C004_Eff_46001_5V200k.png
VOUT = 5 V FS = 200 kHz
Figure 60. Efficiency
LM46001 C024_DO_46001_5V200k.png
VOUT = 5 V FS = 200 kHz
Figure 62. Dropout Curve
LM46001 24V_5VO_200kThetaJA.png
VOUT = 5 V FS = 200 kHz VIN = 24 V
Figure 64. Derating Curve
LM46001 C005_Eff_46001_5V1M.png
VOUT = 5 V FS = 1 MHz VIN = 24 V
Figure 66. Efficiency
LM46001 C025_DO_46001_5V1M.png
VOUT = 5 V FS = 1 MHz
Figure 68. Dropout Curve
LM46001 24V_5VO_1000kThetaJA.png
VOUT = 5 V FS = 1 MHz VIN = 24 V
Figure 70. Derating Curve
LM46001 C007_Eff_46001_12V500k.png
VOUT = 12 V FS = 500 kHz
Figure 72. Efficiency
LM46001 C027_DO_46001_12V500k.png
VOUT = 12 V FS = 500 kHz
Figure 74. Dropout Curve
LM46001 24V_12VO_500kThetaJA.png
VOUT = 12 V FS = 500 kHz VIN = 24 V
Figure 76. Derating Curve
LM46001 C008_Eff_46001_24V500k.png
VOUT = 24 V FS = 500 kHz
Figure 78. Efficiency
LM46001 C028_DO_46001_24V500k.png
VOUT = 24 V FS = 500 kHz
Figure 80. Dropout Curve
LM46001 48V_24VO_500kThetaJA.png
VOUT = 24 V FS = 500 kHz VIN = 48 V
Figure 82. Derating Curve
LM46001 5VO_500kThetaJA20CpW.png
VOUT = 5 V FS = 500 kHz RθJA = 20 °C/W
Figure 84. Derating Curve with RθJA = 20°C/W
LM46001 5VO_1000kThetaJA20CpW.png
VOUT = 5 V FS = 1 MHz RθJA = 20 °C/W
Figure 86. Derating Curve with RθJA = 20°C/W
LM46001 46001_5V_1MHz_FreqPFM.png
VOUT = 5 V FS = 1 MHz
Figure 88. Switching Frequency vs IOUT in PFM Operation
LM46001 24VIN_3V3_500k_90mA_DCM.gif
VOUT = 3.3 V FS = 500 kHz IOUT = 90 mA
Figure 90. Switching Waveform in DCM Operation
LM46001 24VIN_3p3VO_500k_1A.gif
VIN = 24 V VOUT = 3.3 V RLOAD = 3.3 Ω
Figure 92. Start-up Into Full Load With Internal Soft-Start Rate
LM46001 24VIN_3p3VO_500k_100mA.gif
VIN = 24 V VOUT = 3.3 V RLOAD = 33 Ω
Figure 94. Start-up Into 100 mA With Internal Soft-Start Rate
LM46001 24VIN_12VO_500k_1A_33nFCss.gif
VIN = 24 V VOUT = 12 V RLOAD = 6 Ω
Figure 96. Start-up with External Capacitor CSS = 33 nF
LM46001 12TO48V_3V3_500k_500mA_1V1us.gif
VOUT = 3.3 V FS = 500 kHz IOUT = 0.5 A
Figure 98. Line Transient: VIN Transitions Between 12 V and 48 V