JAJSLP2A august   2021  – july 2023 AFE439A2 , AFE539A4 , AFE639D2

PRODUCTION DATA  

  1.   1
  2. 特長
  3. アプリケーション
  4. 概要
  5. Revision History
  6. Pin Configuration and Functions
  7. Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  熱に関する情報
    5. 6.5  Electrical Characteristics: Voltage Output
    6. 6.6  Electrical Characteristics: Comparator Mode
    7. 6.7  Electrical Characteristics: ADC Input
    8. 6.8  Electrical Characteristics: General
    9. 6.9  Timing Requirements: I2C Standard Mode
    10. 6.10 Timing Requirements: I2C Fast Mode
    11. 6.11 Timing Requirements: I2C Fast Mode Plus
    12. 6.12 Timing Requirements: SPI Write Operation
    13. 6.13 Timing Requirements: SPI Read and Daisy Chain Operation (FSDO = 0)
    14. 6.14 Timing Requirements: SPI Read and Daisy Chain Operation (FSDO = 1)
    15. 6.15 Timing Requirements: PWM Output
    16. 6.16 Timing Requirements: I2C Controller
    17. 6.17 Timing Diagrams
    18. 6.18 Typical Characteristics: Voltage Output
    19. 6.19 Typical Characteristics: ADC
    20. 6.20 Typical Characteristics: Comparator
    21. 6.21 Typical Characteristics: General
  8. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagrams
    3. 7.3 Feature Description
      1. 7.3.1 Smart Analog Front End (AFE) Architecture
      2. 7.3.2 Programming Interface
      3. 7.3.3 Nonvolatile Memory (NVM)
        1. 7.3.3.1 NVM Cyclic Redundancy Check (CRC)
          1. 7.3.3.1.1 NVM-CRC-FAIL-USER Bit
          2. 7.3.3.1.2 NVM-CRC-FAIL-INT Bit
      4. 7.3.4 Power-On Reset (POR)
      5. 7.3.5 External Reset
      6. 7.3.6 Register-Map Lock
    4. 7.4 Device Functional Modes
      1. 7.4.1 Voltage-Output Mode
      2. 7.4.2 Voltage Reference and DAC Transfer Function
        1. 7.4.2.1 Power-Supply as Reference
        2. 7.4.2.2 Internal Reference
        3. 7.4.2.3 External Reference
      3. 7.4.3 Comparator Mode
      4. 7.4.4 Analog-to-Digital Converter (ADC) Mode
      5. 7.4.5 Pulse-Width Modulation (PWM)
      6. 7.4.6 Proportional-Integral (PI) Control
        1. 7.4.6.1 AFE439A2 PI Control
        2. 7.4.6.2 AFE539A4 PI Control
        3. 7.4.6.3 AFE639D2 PI Control
    5. 7.5 Programming
      1. 7.5.1 SPI Programming Mode
      2. 7.5.2 I2C Programming Mode
        1. 7.5.2.1 F/S Mode Protocol
        2. 7.5.2.2 I2C Update Sequence
          1. 7.5.2.2.1 Address Byte
          2. 7.5.2.2.2 Command Byte
        3. 7.5.2.3 I2C Read Sequence
    6. 7.6 Register Maps
      1. 7.6.1  NOP Register (address = 00h) [reset = 0000h]
      2. 7.6.2  DAC-x-VOUT-CMP-CONFIG Register (address = 03h, 09h, 0Fh, 15h)
      3. 7.6.3  COMMON-CONFIG Register (address = 1Fh)
      4. 7.6.4  COMMON-TRIGGER Register (address = 20h) [reset = 0000h]
      5. 7.6.5  COMMON-PWM-TRIG Register (address = 21h) [reset = 0000h]
      6. 7.6.6  GENERAL-STATUS Register (address = 22h) [reset = 00h, DEVICE-ID, VERSION-ID]
      7. 7.6.7  INTERFACE-CONFIG Register (address = 26h) [reset = 0000h]
      8. 7.6.8  STATE-MACHINE-CONFIG0 Register (address = 27h) [reset = 0003h]
      9. 7.6.9  STATE-MACHINE-CONFIG1 Register (address = 29h) [reset = C800h]
      10. 7.6.10 SRAM-CONFIG Register (address = 2Bh) [reset = 0000h]
      11. 7.6.11 SRAM-DATA Register (address = 2Ch) [reset = 0000h]
  9. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. Device and Documentation Support
    1. 9.1 Documentation Support
      1. 9.1.1 Related Documentation
    2. 9.2 ドキュメントの更新通知を受け取る方法
    3. 9.3 サポート・リソース
    4. 9.4 Trademarks
    5. 9.5 静電気放電に関する注意事項
    6. 9.6 用語集
  11. 10Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ(パッケージ|ピン)
サーマルパッド・メカニカル・データ
発注情報

Electrical Characteristics: Voltage Output

all minimum/maximum specifications at –40°C ≤ TA ≤ +125°C and typical specifications at TA = 25°C, 1.7 V ≤ VDD ≤ 5.5 V, DAC reference tied to VDD, gain = 1 ×, DAC output pin (OUT) loaded with resistive load (RL = 5 kΩ to AGND) and capacitive load (CL = 200 pF to AGND), and digital inputs at VDD or AGND (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
STATIC PERFORMANCE
Resolution AFE639D2 12 Bits
AFE539A4 10
INL Integral nonlinearity(1) AFE639D2 –4 4 LSB
AFE539A4 –1 1
DNL Differential nonlinearity(1) –1 1 LSB
Zero-code error(2) Code 0d into DAC, external reference, VDD = 5.5 V 6 12 mV
Code 0d into DAC, internal VREF, gain = 4 ×,
VDD = 5.5 V
6 15
Zero-code error temperature coefficient(2) ±10 µV/°C
Offset error(2) 1.7 V ≤ VDD < 2.7 V, VFB pin shorted to VOUT, DAC code: 32d for 12-bit resolution, 8d for 10-bit resolution –0.75 0.3 0.75 %FSR
2.7 V ≤ VDD ≤ 5.5 V, VFB pin shorted to VOUT, DAC code: 32d for 12-bit resolution, 8d for 10-bit resolution –0.5 0.25 0.5
Offset-error temperature coefficient(2) VFB pin shorted to VOUT, DAC code: 32d for 12-bit resolution, 8d for 10-bit resolution ±0.0003 %FSR/°C
Gain error(2) Between end-point codes: 32d to 4064d for 12-bit resolution, 8d to 1016d for 10-bit resolution –0.5 0.25 0.5 %FSR
Gain-error temperature coefficient(2) Between end-point codes: 32d to 4064d for 12-bit resolution, 8d to 1016d for 10-bit resolution ±0.0008 %FSR/°C
Full-scale error(2) 1.7 V ≤ VDD < 2.7 V, DAC at full-scale –1 1 %FSR
2.7 V ≤ VDD ≤ 5.5 V, DAC at full-scale –0.5 0.5
Full-scale-error temperature coefficient(2) DAC at full-scale ±0.0008 %FSR/°C
OUTPUT
Output voltage Reference tied to VDD 0 VDD V
CL Capacitive load(3) RL = infinite, phase margin = 30° 200 pF
Phase margin = 30° 1000
Short-circuit current VDD = 1.7 V, full-scale output shorted to AGND or
zero-scale output shorted to VDD
15 mA
VDD = 2.7 V, full-scale output shorted to AGND or
zero-scale output shorted to VDD
50
VDD = 5.5 V, full-scale output shorted to AGND or
zero-scale output shorted to VDD
60
Output-voltage headroom(3) To VDD, DAC output unloaded, internal reference = 1.21 V), VDD ≥ 1.21 V × gain + 0.2 V 0.2 V
To VDD and to AGND,
DAC output unloaded, external reference at VDD (gain = 1 ×), the VREF pin is not shorted to VDD
0.8 %FSR
To VDD and to AGND, ILOAD = 10 mA at VDD = 5.5 V, ILOAD = 3 mA at VDD = 2.7 V, ILOAD = 1 mA at VDD =
1.8 V, external reference at VDD (gain = 1 ×), the VREF pin is not shorted to VDD
10
ZO VFB dc output impedance(4) DAC output enabled, internal reference (gain = 1.5 × or 2 ×) or external reference at VDD (gain = 1 ×), the VREF pin is not shorted to VDD 400 500 600
DAC output enabled, internal VREF, gain = 3 × or 4 × 325 400 485
Power supply rejection ratio (dc) Internal VREF, gain = 2 ×, DAC at midscale,
VDD = 5 V ±10%
0.25 mV/V
DYNAMIC PERFORMANCE
tsett Output voltage settling time 1/4 to 3/4 scale and 3/4 to 1/4 scale settling to 10%FSR, VDD = 5.5 V 20 µs
1/4 to 3/4 scale and 3/4 to 1/4 scale settling to 10%FSR, VDD = 5.5 V, internal VREF, gain = 4 × 25
Slew rate VDD = 5.5 V 0.3 V/µs
Power-on glitch magnitude At start-up, DAC output disabled 75 mV
At start-up, DAC output disabled, RL = 100 kΩ 200
Output-enable glitch magnitude DAC output disabled to enabled, DAC registers at zero scale, RL = 100 kΩ 250 mV
Vn Output noise voltage (peak to peak) f = 0.1 Hz to 10 Hz, DAC at midscale, VDD = 5.5 V 50 µVPP
Internal VREF, gain = 4 ×, f = 0.1 Hz to 10 Hz,
DAC at midscale, VDD = 5.5 V
90
Output noise density f = 1 kHz, DAC at midscale, VDD = 5.5 V 0.35 µV/√Hz
Internal VREF, gain = 4 ×, f = 1 kHz, DAC at midscale, VDD = 5.5 V 0.9
Power supply rejection ratio (ac)(4) Internal VREF, gain = 4 ×, 200-mV 50-Hz or 60-Hz sine wave superimposed on power supply voltage, DAC at midscale –68 dB
Code change glitch impulse ±1-LSB change around midscale (including feedthrough) 10 nV-s
Code change glitch impulse magnitude ±1-LSB change around midscale (including feedthrough) 15 mV
Measured with DAC output unloaded. For external reference and internal reference VDD ≥ 1.21 × gain + 0.2 V, between end-point codes: 32d to 4064d for 12-bit resolution, 8d to 1016d for 10-bit resolution.
Measured with DAC output unloaded.
Specified by design and characterization, not production tested.
Specified with 200-mV headroom with respect to reference value when internal reference is used.