JAJSIZ3Y September   1997  – April 2020 LM317

PRODUCTION DATA.  

  1. 1 特長
  2. 2 アプリケーション
  3. 3 概要
    1.     Device Images
      1.      バッテリ充電器の回路
  4. 4 改訂履歴
  5. 5 Device Comparison Table
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 NPN Darlington Output Drive
      2. 8.3.2 Overload Block
      3. 8.3.3 Programmable Feedback
    4. 8.4 Device Functional Modes
      1. 8.4.1 Normal Operation
      2. 8.4.2 Operation With Low Input Voltage
      3. 8.4.3 Operation at Light Loads
      4. 8.4.4 Operation In Self Protection
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
    3. 9.3 System Examples
      1. 9.3.1  0-V to 30-V Regulator Circuit
      2. 9.3.2  Adjustable Regulator Circuit With Improved Ripple Rejection
      3. 9.3.3  Precision Current-Limiter Circuit
      4. 9.3.4  Tracking Preregulator Circuit
      5. 9.3.5  1.25-V to 20-V Regulator Circuit With Minimum Program Current
      6. 9.3.6  Battery-Charger Circuit
      7. 9.3.7  50-mA Constant-Current Battery-Charger Circuit
      8. 9.3.8  Slow Turn-On 15-V Regulator Circuit
      9. 9.3.9  AC Voltage-Regulator Circuit
      10. 9.3.10 Current-Limited 6-V Charger Circuit
      11. 9.3.11 Adjustable 4-A Regulator Circuit
      12. 9.3.12 High-Current Adjustable Regulator Circuit
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12デバイスおよびドキュメントのサポート
    1. 12.1 ドキュメントの更新通知を受け取る方法
    2. 12.2 サポート・リソース
    3. 12.3 商標
    4. 12.4 静電気放電に関する注意事項
    5. 12.5 Glossary
  13. 13メカニカル、パッケージ、および注文情報

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

9.2.1 Design Requirements

  • R1 and R2 are required to set the output voltage.
  • CADJ is recommended to improve ripple rejection. It prevents amplification of the ripple as the output voltage is adjusted higher.
  • Ci is recommended, particularly if the regulator is not in close proximity to the power-supply filter capacitors. A 0.1-µF or 1-µF ceramic or tantalum capacitor provides sufficient bypassing for most applications, especially when adjustment and output capacitors are used.
  • CO improves transient response, but is not needed for stability.
  • Protection diode D2 is recommended if CADJ is used. The diode provides a low-impedance discharge path to prevent the capacitor from discharging into the output of the regulator.
  • Protection diode D1 is recommended if CO is used. The diode provides a low-impedance discharge path to prevent the capacitor from discharging into the output of the regulator.