JAJS216C September   1997  – August 2016 OPA2340 , OPA340 , OPA4340

PRODUCTION DATA.  

  1. 特長
  2. アプリケーション
  3. 概要
  4. 改訂履歴
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information - OPA340
    5. 6.5 Thermal Information - OPA2340
    6. 6.6 Thermal Information - OPA4340
    7. 6.7 Electrical Characteristics
    8. 6.8 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Operating Voltage
      2. 7.3.2 Rail-to-Rail Input
      3. 7.3.3 Rail-to-Rail Output
      4. 7.3.4 Capacitive Load and Stability
      5. 7.3.5 Driving A/D Converters
    4. 7.4 Device Functional Modes
  8. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 Single-Pole, Low-Pass Filter
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
        3. 8.2.1.3 Application Curve
      2. 8.2.2 Two-Pole, Low-Pass Filter
        1. 8.2.2.1 Detailed Design Procedure
        2. 8.2.2.2 Application Curve
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11デバイスおよびドキュメントのサポート
    1. 11.1 デバイス・サポート
      1. 11.1.1 開発サポート
        1. 11.1.1.1 TINA-TI™ (無料のダウンロード・ソフトウェア)
        2. 11.1.1.2 DIPアダプタ評価モジュール
        3. 11.1.1.3 ユニバーサル・オペアンプ評価モジュール
        4. 11.1.1.4 TI Precision Designs
        5. 11.1.1.5 WEBENCHFilter Designer
    2. 11.2 ドキュメントのサポート
      1. 11.2.1 関連資料
    3. 11.3 関連リンク
    4. 11.4 ドキュメントの更新通知を受け取る方法
    5. 11.5 コミュニティ・リソース
    6. 11.6 商標
    7. 11.7 静電気放電に関する注意事項
    8. 11.8 Glossary
  12. 12メカニカル、パッケージ、および注文情報

パッケージ・オプション

メカニカル・データ(パッケージ|ピン)
サーマルパッド・メカニカル・データ
発注情報

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)
MIN MAX UNIT
Voltage Supply voltage 5.5 V
Signal input terminals(2) –0.5 0.5
Current Signal input terminals(2) 10 mA
Output short circuit(3) Continuous
Temperature Operating, TA –55 125 °C
Junction, TJ 150
Storage, Tstg –55 125
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5 V beyond the supply rails should be current limited to 10 mA or less.
(3) Short-circuit to ground, one amplifier per package.

6.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±600 V
Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±250
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
Supply voltage 2.7 5.5 V
Specified temperature –40 125 °C

6.4 Thermal Information – OPA340

THERMAL METRIC(1) OPA340 UNIT
DBV
(SOT-23)
P
(PDIP)
D
(SOIC)
D
(SOIC)
5 PINS 8 PINS 8 PINS 14 PINS
RθJA Junction-to-ambient thermal resistance 207.9 53.1 142 83.8 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 71.2 42.5 90.2 70.7 °C/W
RθJB Junction-to-board thermal resistance 36.0 30.3 82.5 59.5 °C/W
ψJT Junction-to-top characterization parameter 2.0 19.7 39.4 11.6 °C/W
ψJB Junction-to-board characterization parameter 35.2 30.2 82 37.7 °C/W
RθJC(bot) Junction-to-case (bottom) thermal resistance °C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.

6.5 Thermal Information – OPA2340

THERMAL METRIC(1) OPA2340 UNIT
D
(SOIC)
DGK
(VSSOP)
8 PINS 8 PINS
RθJA Junction-to-ambient thermal resistance 138.4 169.2 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 89.5 62.8 °C/W
RθJB Junction-to-board thermal resistance 78.6 89.8 °C/W
ψJT Junction-to-top characterization parameter 29.9 7.5 °C/W
ψJB Junction-to-board characterization parameter 78.1 88.2 °C/W
RθJC(bot) Junction-to-case (bottom) thermal resistance °C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.

6.6 Thermal Information – OPA4340

THERMAL METRIC(1) OPA4340 UNIT
DBQ
(SSOP)
16 PINS
RθJA Junction-to-ambient thermal resistance 115.8 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 67 °C/W
RθJB Junction-to-board thermal resistance 58.3 °C/W
ψJT Junction-to-top characterization parameter 19.9 °C/W
ψJB Junction-to-board characterization parameter 57.9 °C/W
RθJC(bot) Junction-to-case (bottom) thermal resistance °C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.

6.7 Electrical Characteristics

At TA = 25°C, RL = 10 kΩ connected to VS/2, and VOUT = VS/2, unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP(1) MAX UNIT
OFFSET VOLTAGE
VOS Input offset voltage VS = 5 V ±150 ±500 µV
dVOS/dt Input offset voltage vs temperature TA = –40°C to 85°C, VS = 5 V ±2.5 µV/°C
PSRR Input offset voltage vs power supply VS = 2.7 V to 5.5 V, VCM = 0 V 30 120 µV/V
Over temperature VS = 2.7 V to 5.5 V, VCM = 0 V,
TA = –40°C to 85°C, VS = 5 V
120 µV/°C
Channel separation, DC 0.2 µV/V
INPUT BIAS CURRENT
IS Input bias current ±0.2 ±10 pA
Over temperature TA = –40°C to 85°C, VS = 5 V ±60
IOS Input offset current ±0.2 ±10 pA
NOISE
Input voltage noise f = 0.1 kHz to 50 kHz 8 µVRMS
en Input voltage noise density f = 1 kHz 25 nV/√Hz
in Current noise density f = 1 kHz 3 fA/√Hz
INPUT VOLTAGE RANGE
VCM Common-mode voltage range –0.3 (V+) + 0.3 V
CMRR Common-mode rejection ratio –0.3 V < VCM < (V+) – 1.8 V 80 92 dB
VS = 5 V, –0.3 V < VCM < 5.3 V 70 84
VS = 2.7 V, –0.3 V < VCM < 3 V 66 80
INPUT IMPEDANCE
Differential 1013 || 3 Ω || pF
Common-mode 1013 || 6 Ω || pF
OPEN-LOOP GAIN
AOL Open-loop voltage gain RL = 100 kΩ,
5 mV < VO < (V+) – 5 mV
106 124 dB
RL = 10 kΩ,
5 mV < VO < (V+) – 50 mV
100 120
RL = 2 kΩ,
200 mV < VO < (V+) – 200 mV
94 114
Over temperature RL = 100 kΩ,
5 mV < VO < (V+) – 5 mV,
TA = –40°C to 85°C, VS = 5 V
106
RL = 10 kΩ,
5 mV < VO < (V+) – 50 mV,
TA = –40°C to 85°C, VS = 5 V
100
RL = 2 kΩ,
200 mV < VO < (V+) – 200 mV,
TA = –40°C to 85°C, VS = 5 V
94
FREQUENCY RESPONSE
GBW Gain-bandwidth product G = 1 5.5 MHz
SR Slew rate VS = 5 V, G = 1, CL = 100 pF 6 V/µs
Settling time, 0.1% VS = 5 V, 2-V step, CL = 100 pF 1 µs
Settling time, 0.01% VS = 5 V, 2-V step, CL = 100 pF 1.6 µs
Overload recovery time VIN × G = VS 0.2 µs
THD+N Total harmonic distortion + noise VS = 5 V, VO = 3VPP(2), G = 1,
f = 1 kHz
0.0007%
OUTPUT
Voltage output swing from rail(2) RL = 100 kΩ, AOL ≥ 106 dB 1 5 mV
RL = 10 kΩ, AOL ≥ 106 dB 10
RL = 2 kΩ, AOL ≥ 106 dB 40
Over temperature RL = 100 kΩ, AOL ≥ 106 dB,
TA = –40°C to 85°C, VS = 5 V
5
RL = 10 kΩ, AOL ≥ 106 dB,
TA = –40°C to 85°C, VS = 5 V
50
RL = 2 kΩ, AOL ≥ 106 dB,
TA = –40°C to 85°C, VS = 5 V
200
ISC Short-circuit current ±50 mA
CLOAD Capacitive load drive See Typical Characteristics
POWER SUPPLY
VS Specified voltage range 2.7 5 V
Operating voltage range Lower end 2.5 V
Higher end 5.5
IQ Quiescent current
(per amplifier)
IO = 0, VS = 5 V 750 950 µA
Over temperature IO = 0, VS = 5 V, TA = –40°C to 85°C 100
TEMPERATURE RANGE
Specified range –40 85 °C
Operating range –55 125 °C
Storage range –55 125 °C
(1) VS = 5 V.
(2) Output voltage swings are measured between the output and power-supply rails.

6.8 Typical Characteristics

At TA = 25°C, VS = 5 V, and RL = 10 kΩ connected to VS/2, unless otherwise noted.
OPA340 OPA2340 OPA4340 tc_voltg_gain-freq_bos073.gif Figure 1. Open-Loop Gain/Phase vs Frequency
OPA340 OPA2340 OPA4340 tc_voltg_noise-freq_bos073.gif Figure 3. Input Voltage and Current Noise Spectral Density vs Frequency
OPA340 OPA2340 OPA4340 tc_thdn-freq_bos073.gif Figure 5. Total Harmonic Distortion + Noise vs Frequency
OPA340 OPA2340 OPA4340 tc_aol_psrr-tmp_bos073.gif Figure 7. Open-Loop Gain and Power-Supply Rejection vs Temperature
OPA340 OPA2340 OPA4340 tc_iq-tmp_bos073.gif Figure 9. Quiescent Current vs Temperature
OPA340 OPA2340 OPA4340 tc_short_cir-tmp_bos073.gif Figure 11. Short-Circuit Current vs Temperature
OPA340 OPA2340 OPA4340 tc_input_bias-tmp_bos073.gif Figure 13. Input Bias Current vs Temperature
OPA340 OPA2340 OPA4340 tc_output_vltg-out_curr_bos0.gif Figure 15. Output Voltage Swing vs Output Current
OPA340 OPA2340 OPA4340 tc_offset_vltg_prod_bos073.gif Figure 17. Offset Voltage Production Distribution
OPA340 OPA2340 OPA4340 graph_19_sbos073.gif
CL = 100 pF
Figure 19. Small-Signal Step Response
OPA340 OPA2340 OPA4340 tc_overshoot-load_bos073.gif Figure 21. Small-Signal Overshoot vs Load Capacitance
OPA340 OPA2340 OPA4340 tc_psrr-freq_bos073.gif Figure 2. Power-Supply and Common-Mode Rejection vs Frequency
OPA340 OPA2340 OPA4340 tc_channel-freq_bos073.gif Figure 4. Channel Separation vs Frequency
OPA340 OPA2340 OPA4340 tc_output_res-freq_bos073.gif Figure 6. Closed-Loop Output Impedance vs Frequency
OPA340 OPA2340 OPA4340 tc_cmrr-tmp_bos073.gif Figure 8. Common-Mode Rejection vs Temperature
OPA340 OPA2340 OPA4340 tc_iq-sv_bos073.gif Figure 10. Quiescent Current vs Supply Voltage
OPA340 OPA2340 OPA4340 tc_short_cir-sv_bos073.gif Figure 12. Short-Circuit Current vs Supply Voltage
OPA340 OPA2340 OPA4340 tc_input_bias-common_bos073.gif Figure 14. Input Bias Current vs Input Common-Mode Voltage
OPA340 OPA2340 OPA4340 tc_out_vltg-freq_bos073.gif Figure 16. Maximum Output Voltage vs Frequency
OPA340 OPA2340 OPA4340 tc_offset_vltg_drift_bos073.gif Figure 18. Offset Voltage Drift Magnitude Production Distribution
OPA340 OPA2340 OPA4340 graph_20_sbos073.gif
CL = 100 pF
Figure 20. Large-Signal Step Response
OPA340 OPA2340 OPA4340 tc_set_time-closed_bos073.gif Figure 22. Settling Time vs Closed-Loop Gain