JAJSOK5Q March   2011  – March 2024 TUSB7320 , TUSB7340

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Thermal Information
    5. 5.5  3.3-V I/O Electrical Characteristics
    6. 5.6  Input Clock Specification
    7. 5.7  Input Clock 1.8-V DC Characteristics
    8. 5.8  Crystal Specification
    9. 5.9  TUSB7320 Power Consumption
    10. 5.10 TUSB7340 Power Consumption
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 PHY Control
        1. 6.3.1.1 Output Voltage Swing Control
          1. 6.3.1.1.1 De-Emphasis Control
        2. 6.3.1.2 Adaptive Equalizer
      2. 6.3.2 Input Clock
        1. 6.3.2.1 Clock Source Requirements
        2. 6.3.2.2 External Clock
        3. 6.3.2.3 External Crystal
    4. 6.4 Programming
      1. 6.4.1 Two-Wire Serial-Bus Interface
        1. 6.4.1.1 Serial-Bus Interface Implementation
        2. 6.4.1.2 Serial-Bus Interface Protocol
        3. 6.4.1.3 Serial-Bus EEPROM Application
      2. 6.4.2 System Management Interrupt
  8. 7 Application and Implementation
    1. 7.1 Application Information
      1. 7.1.1 特長
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Upstream Implementation
        2. 7.2.2.2 Downstream Ports Implementation
        3. 7.2.2.3 PCI Express Connector
        4. 7.2.2.4 1.1-V Regulator
        5. 7.2.2.5 5-V VBUS Options
      3. 7.2.3 Application Curves
    3. 7.3 Power Supply Recommendations
      1. 7.3.1 Power-Up and Power-Down Sequencing
        1. 7.3.1.1 Power-Up Sequence
        2. 7.3.1.2 Power-Down Sequence
      2. 7.3.2 PCI Express Power Management
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
        1. 7.4.1.1 High-Speed Differential Routing
        2. 7.4.1.2 SuperSpeed Differential Routing
      2. 7.4.2 Layout Example
  9. 8 Register Maps
    1. 8.1 Classic PCI Configuration Space
      1. 8.1.1  The PCI Configuration Map
      2. 8.1.2  Vendor ID Register
      3. 8.1.3  Device ID Register
      4. 8.1.4  Command Register
      5. 8.1.5  Status Register
      6. 8.1.6  Class Code and Revision ID Register
      7. 8.1.7  Cache Line Size Register
      8. 8.1.8  Latency Timer Register
      9. 8.1.9  Header Type Register
      10. 8.1.10 BIST Register
      11. 8.1.11 Base Address Register 0
      12. 8.1.12 Base Address Register 1
      13. 8.1.13 Base Address Register 2
      14. 8.1.14 Base Address Register 3
      15. 8.1.15 Subsystem Vendor ID Register
      16. 8.1.16 Subsystem ID Register
      17. 8.1.17 Capabilities Pointer Register
      18. 8.1.18 Interrupt Line Register
      19. 8.1.19 Interrupt Pin Register
      20. 8.1.20 Min Grant Register
      21. 8.1.21 Max Latency Register
      22. 8.1.22 Capability ID Register
      23. 8.1.23 Next Item Pointer Register
      24. 8.1.24 Power Management Capabilities Register
      25. 8.1.25 Power Management Control/Status Register
      26. 8.1.26 Power Management Bridge Support Extension Register
      27. 8.1.27 Power Management Data Register
      28. 8.1.28 MSI Capability ID Register
      29. 8.1.29 Next Item Pointer Register
      30. 8.1.30 MSI Message Control Register
      31. 8.1.31 MSI Lower Message Address Register
      32. 8.1.32 MSI Upper Message Address Register
      33. 8.1.33 MSI Message Data Register
      34. 8.1.34 Serial Bus Release Number Register (SBRN)
      35. 8.1.35 Frame Length Adjustment Register (FLADJ)
      36. 8.1.36 PCI Express Capability ID Register
      37. 8.1.37 Next Item Pointer Register
      38. 8.1.38 PCI Express Capabilities Register
      39. 8.1.39 Device Capabilities Register
      40. 8.1.40 Device Control Register
      41. 8.1.41 Device Status Register
      42. 8.1.42 Link Capabilities Register
      43. 8.1.43 Link Control Register
      44. 8.1.44 Link Status Register
      45. 8.1.45 Device Capabilities 2 Register
      46. 8.1.46 Device Control 2 Register
      47. 8.1.47 Link Control 2 Register
      48. 8.1.48 Link Status 2 Register
      49. 8.1.49 Serial Bus Data Register
      50. 8.1.50 Serial Bus Index Register
      51. 8.1.51 Serial Bus Target Address Register
      52. 8.1.52 Serial Bus Control and Status Register
      53. 8.1.53 GPIO Control Register
      54. 8.1.54 GPIO Data Register
      55. 8.1.55 MSI-X Capability ID Register
      56. 8.1.56 Next Item Pointer Register
      57. 8.1.57 MSI-X Message Control Register
      58. 8.1.58 MSI-X Table Offset and BIR Register
      59. 8.1.59 MSI-X PBA Offset and BIR Register
      60. 8.1.60 Subsystem Access Register
      61. 8.1.61 General Control 0 Register
      62. 8.1.62 General Control 1 Register
      63. 8.1.63 General Control 2 Register
      64. 8.1.64 USB Control Register
      65. 8.1.65 De-Emphasis and Swing Control Register
      66. 8.1.66 Equalizer Control Register
      67. 8.1.67 Custom PHY Transmit/Receive Control Register
    2. 8.2 PCI Express Extended Configuration Space
      1. 8.2.1  The PCI Express Extended Configuration Map
      2. 8.2.2  Advanced Error Reporting Capability Register
      3. 8.2.3  Next Capability Offset / Capability Version Register
      4. 8.2.4  Uncorrectable Error Status Register
      5. 8.2.5  Uncorrectable Error Mask Register
      6. 8.2.6  Uncorrectable Error Severity Register
      7. 8.2.7  Correctable Error Severity Register
      8. 8.2.8  Correctable Error Mask Register
      9. 8.2.9  Advanced Error Capabilities and Control Register
      10. 8.2.10 Header Log Register
      11. 8.2.11 Device Serial Number Capability ID Register
      12. 8.2.12 Next Capability Offset/Capability Version Register
      13. 8.2.13 Device Serial Number Register
    3. 8.3 xHCI Memory Mapped Register Space
      1. 8.3.1 The xHCI Register Map
      2. 8.3.2 Host Controller Capability Registers
        1. 8.3.2.1 Capability Registers Length
        2. 8.3.2.2 Host Controller Interface Version Number
        3. 8.3.2.3 Host Controller Structural Parameters 1
        4. 8.3.2.4 Host Controller Structural Parameters 2
        5. 8.3.2.5 Host Controller Structural Parameters 3
        6. 8.3.2.6 Host Controller Capability Parameters
        7. 8.3.2.7 Doorbell Offset
        8. 8.3.2.8 Runtime Register Space Offset
      3. 8.3.3 Host Controller Operational Registers
        1. 8.3.3.1  USB Command Register
        2. 8.3.3.2  USB Command Register
        3. 8.3.3.3  USB Status Register
        4. 8.3.3.4  Page Size Register
        5. 8.3.3.5  Device Notification Control Register
        6. 8.3.3.6  Command Ring Control Register
        7. 8.3.3.7  Device Context Base Address Array Pointer Register
        8. 8.3.3.8  Configure Register
        9. 8.3.3.9  Port Status and Control Register
        10. 8.3.3.10 Port PM Status and Control Register (USB 3.0 Ports)
        11. 8.3.3.11 Port PM Status and Control Register (USB 2.0 Ports)
        12. 8.3.3.12 Port Link Info Register
      4. 8.3.4 Host Controller Runtime Registers
        1. 8.3.4.1 Microframe Index Register
        2. 8.3.4.2 Interrupter Management Register
        3. 8.3.4.3 Interrupter Moderation Register
        4. 8.3.4.4 Event Ring Segment Table Size Register
        5. 8.3.4.5 Event Ring Segment Table Base Address Register
        6. 8.3.4.6 Event Ring Dequeue Pointer Register
      5. 8.3.5 Host Controller Doorbell Registers
      6. 8.3.6 xHCI Extended Capabilities Registers
        1. 8.3.6.1 USB Legacy Support Capability Register
        2. 8.3.6.2 USB Legacy Support Control/Status Register
        3. 8.3.6.3 xHCI Supported Protocol Capability Register (USB 2.0)
        4. 8.3.6.4 xHCI Supported Protocol Name String Register (USB 2.0)
        5. 8.3.6.5 xHCI Supported Protocol Port Register (USB 2.0)
        6. 8.3.6.6 xHCI Supported Protocol Capability Register (USB 3.0)
        7. 8.3.6.7 xHCI Supported Protocol Name String Register (USB 3.0)
        8. 8.3.6.8 xHCI Supported Protocol Port Register (USB 3.0)
    4. 8.4 MSI-X Memory Mapped Register Space
      1. 8.4.1 The MSI-X Table and PBA in Memory Mapped Register Space
    5. 8.5 The MSI-X Table and PBA in Memory Mapped Register Space
  10. 9 Device and Documentation Support
    1. 9.1 Device Support
      1. 9.1.1 サード・パーティ製品に関する免責事項
      2. 9.1.2 Device Nomenclature
    2. 9.2 Documentation Support
      1. 9.2.1 Related Documentation
    3. 9.3 ドキュメントの更新通知を受け取る方法
    4. 9.4 サポート・リソース
    5. 9.5 Trademarks
    6. 9.6 静電気放電に関する注意事項
    7. 9.7 用語集
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

8.1.4 Command Register

The Command register provides control over the TUSB73X0 interface to the PCIe interface

PCI register offset: 04h

Register type: Read-only, Read/Write

Default value: 0000h

Table 8-4 PCI Register 04h
Bit No.1514131211109876543210
Reset State0000000000000000
Table 8-5 Bit Command Register Description
BITFIELD NAMEACCESSDESCRIPTION
15:11RSVDrReserved. Returns zeros when read.
10INT_DISABLErwINTx# Disable. This bit enables device specific interrupts.
9FBB_ENBrFast back-to-back enable. The host controller does not generate fast back-to-back transactions; therefore, this bit returns 0 when read.
8SERR_ENBrwSERR enable bit. When this bit is set, the host controller can signal fatal and nonfatal errors on the PCI Express interface on behalf of SERR assertions detected on the PCI bus.
0 = Disable the reporting of nonfatal errors and fatal errors (default)
1 = Enable the reporting of nonfatal errors and fatal errors
7STEP_ENBrAddress/data stepping control. The host controller does not support address/data stepping, and this bit is hardwired to 0b.
6PERR_ENBrwControls the setting of bit 8 (DATAPAR) in the status register (offset 06h, see Status Register) in response to a received poisoned TLP from PCI Express. A received poisoned TLP is forwarded with bad parity to conventional PCI regardless of the setting of this bit.
0 = Disables the setting of the controller data parity error bit (default)
1 = Enables the setting of the controller data parity error bit
5VGA_ENBrVGA palette snoop enable. The host controller does not support VGA palette snooping; therefore, this bit returns 0b when read.
4MWI_ENBrMemory write and invalidate enable. The host controller does not support memory write and invalidate enable; therefore, this bit returns 0b when read.
3SPECIALrSpecial cycle enable. This host controller does not respond to special cycle transactions; therefore, this bit returns 0 when read.
2CONTROLLER_ENBrwBus controller enable. When this bit is set, the host controller is enabled to initiate transactions on the PCI Express interface.
0 = PCI Express interface cannot initiate transactions. The host controller must disable the response to memory and I/O transactions on the PCI interface (default).
1 = PCI Express interface can initiate transactions. The host controller can forward memory and I/O transactions from PCI secondary interface to the PCI Express interface.
1MEMORY_ENBrwMemory space enable. Setting this bit enables the host controller to respond to memory transactions on the PCI Express interface.
0 = PCI Express receiver cannot process downstream memory transactions and must respond with an unsupported request (default)
1 = PCI Express receiver can process downstream memory transactions. The host controller can forward memory transactions to the PCI interface.
0IO_ENBrI/O space enable. Setting this bit enables the host controller to respond to I/O transactions on the PCI Express interface.
0 = PCI Express receiver cannot process downstream I/O transactions and must respond with an unsupported request (default)
1 = PCI Express receiver can process downstream I/O transactions. The host controller can forward I/O transactions to the PCI interface.