SCLK034 December   2023 SN54SC2T74-SEP

PRODUCTION DATA  

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Device Information
    1. 1.1 Device Details
  5. 2Total Dose Test Setup
    1. 2.1 Test Overview
    2. 2.2 Test Description and Facilities
    3. 2.3 Test Setup Details
      1. 2.3.1 Bias Diagram
    4. 2.4 Test Configuration and Condition
  6. 3TID Characterization Test Results
    1. 3.1 TID Characterization Summary Results
    2. 3.2 Specification Compliance Matrix
  7. 4Reference Documents
  8. 5Appendix: HDR TID Report Data

Specification Compliance Matrix

Table 3-1 Electrical Parameters Table
ParameterTest ConditionsVCCTA = -55°C to +125°CUnitTest Name
MINTYPMAX
VT+1Positive-going input threshold voltage1.2 V to 1.3 V0.310.6551.1VVTP_1P2V
1.65 V to 2 V0.390.9151.32VTP_1P65V, VTP_2V
2.25 V to 2.75 V0.511.091.51VTP_2P25V, VTP_2P75V
3 V to 3.6 V0.651.21.7VTP_3V, VTP_3P6V
4.5 V to 5.5 V0.871.512.16VTP_4P5V, VTP_5P5V
VT-1Negative-going input threshold voltage1.2 V to 1.3 V0.110.3490.622VVTN_1P2V
1.65 V to 2 V0.180.4550.666VTN_1P65V, VTN_2V
2.25 V to 2.75 V0.250.5450.74VTN_2P25V, VTN_2P75V
3 V to 3.6 V0.330.6350.85VTN_3V, VTN_3P6V
4.5 V to 5.5 V0.450.7551.14VTN_4P5V, VTN_5P5V
ΔVT1Hysteresis (VT+ − VT−)1.2 V to 1.3 V0.0810.290.77VDELTAVT_1P2V
1.65 V to 2 V0.210.430.88DELTAVT_1P65V, DELTAVT_2V
2.25 V to 2.75 V0.250.540.91DELTAVT_2P25V, DELTAVT_2P75V
3 V to 3.6 V0.310.630.91DELTAVT_3V, DELTAVT_3P6V
4.5 V to 5.5 V0.430.751.1DELTAVT_4P5V, DELTAVT_5P5V
VIHHigh-level input voltage1.2 V to 1.3 V0.78VVIH_1P2V, VIH_1P3V
1.65 V to 2 V1.1VIH_1P65V, VIH_2V
2.25 V to 2.75 V1.28VIH_2P25V, VIH_2P75V
3 V to 3.6 V1.45VIH_3V, VIH_3P6V
4.5 V to 5.5 V2VIH_4P5V, VIH_5P5V
VILLow-Level input voltage1.2 V to 1.3 V0.18VVIL_1P2V, VIL_1P3V
1.65 V to 2 V0.51VIL_1P65V, VIL_2V
2.25 V to 2.75 V0.65VIL_2P25V, VIL_2P75V
3 V to 3.6 V0.75VIL_3V, VIL_3P6V
4.5 V to 5.5 V0.80VIL_4P5V, VIL_5P5V
VOH2IOH = -50 µA1.2 V to 5.5 VVCC-0.2VVOH_N50UA_1P65V, VOH_N50UA_2V, VOH_N50UA_2P75V,VOH_N50UA_3P6V, VOH_N50UA_4P5V, VOH_N50UA_5P5V
IOH = -1 mA1.2 V0.8VOH_N1MA_1P2V
IOH = -2 mA1.65 V to 2 V1.21VOH_N2MA_1P65V, VOH_N2MA_2V
IOH = -3 mA2.25 V to 2.75 V1.93VOH_N3MA_2P25V, VOH_N3MA_2P75V
IOH = -5.5 mA3 V to 3.6 V2.49VOH_N5P5MA_3V, VOH_N5P5MA_3P6V
IOH = -8 mA4.5 V to 5.5 V3.95VOH_N8MA_4P5V, VOH_N8MA_5P5V
IOH= –24 mA4.5 V to 5.5 V3.15VOH_N24MA_4P5V, VOH_N24MA_5P5V
VOLIOL= 50 μA1.2 V to 5.5 V0.1VVOL_50UA_1P65V, VOL_50UA_2V, VOL_50UA_2P75V,VOL_50UA_3P6V, VOL_50UA_4P5V, VOL_50UA_5P5V
IOL = 1 mA1.2 V0.2VOL_1MA_1P2V
IOL = 2 mA1.65 V to 2 V0.25VOL_2MA_1P65V, VOL_2MA_2V
IOL = 3 mA2.25 V to 2.75 V0.2VOL_3MA_2P25V, VOL_3MA_2P75V
IOL = 5.5 mA3 V to 3.6 V0.25VOL_5P5MA_3V, VOL_5P5MA_3P6V
IOL= 8 mA4.5 V to 5.5 V0.35VOL_8MA_4P5V, VOL_8MA_5P5V
IOL= 24 mA4.5 V to 5.5 V0.75VOL_24MA_4P5V, VOL_24MA_5P5V
ICCVI = VCC or GND, IO = 01.2 V to 5.5 V293µAICCH_5P5V, ICCL_5P5V
ΔICCOne input at 0.3 V or 3.4 V, other inputs at VCC or GND5.5 V1.5mADELTAICC_5P5V
One input at 0.3 V or 1.1 V, other inputs at VCC or GND1.8 V68µADELTAICC_1P8V
IOZ3VO = VCC or GND5.5 V±2.5µAIOZ
IIVI = 0 V to VCCVI = 0 V to VCC±1µAIIH_5P5V, IIL_5P5V
  1. Schmitt-trigger input devices only.
  2. Push-pull output devices only.
  3. 3-State output devices only.