SLAU841A October   2020  – October 2022 DAC43701 , DAC43701-Q1 , DAC53701 , DAC53701-Q1

 

  1.    DAC53701EVM
  2.   Trademarks
  3. 1Overview
    1. 1.1 Kit Contents
    2. 1.2 Related Documentation from Texas Instruments
  4. 2System Setup
    1. 2.1 Software Setup
      1. 2.1.1 Operating Systems
      2. 2.1.2 Software Installation
    2. 2.2 Hardware Setup
      1. 2.2.1 Electrostatic Discharge Caution
      2. 2.2.2 Power Configurations and Jumper Settings
      3. 2.2.3 Connecting the Hardware
  5. 3Detailed Description
    1. 3.1 Hardware Description
      1. 3.1.1 Theory of Operation
        1. 3.1.1.1 Signal Definitions
    2. 3.2 Software Description
      1. 3.2.1 Starting the Software
      2. 3.2.2 Software Features
        1. 3.2.2.1 High Level Configuration Page
        2. 3.2.2.2 Low Level Configuration Page
  6. 4Schematic, PCB Layout, and Bill of Materials
    1. 4.1 Schematic
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  7. 5Revision History

Low Level Configuration Page

Figure 3-4 shows the Low Level Configuration page that allows access to low-level communication directly with the respective DACx3701 device registers. Select a register on the Register Map list to show a description of the values in that register, as well as information on the register address, default value, size, and current value. Data are written to the registers by entering a value in the value column of the GUI.

GUID-20220919-SS0I-D9TN-50HH-PHNZBC5CNHTN-low.pngFigure 3-4 Low Level Configuration Page

To store the values of the register map locally, select Save Configuration under the File menu option. The stored configuration files can be recalled and loaded by selecting Open Configuration.

Figure 3-5 shows the four configuration buttons provided on the Low Level Configuration page that allow the user to read from and write to the device registers:

  • Write Selected
  • Write Modified
  • Read Selected
  • Read All

The Write Modified button is enabled only in Deferred Update Mode. Deferred Update Mode initiates a write operation only when the Write Selected or Write Modified buttons are pressed. By default, Immediate Update Mode is selected for the Low Level Configuration page write operations.

GUID-3FFECA5A-90B3-43C5-ABB1-CE4954CBD5E8-low.pngFigure 3-5 Low Level Configuration Page Options