SLUU944A June   2012  – December 2021 TPS53015

 

  1.   Trademarks
  2. Introduction
  3. Description
    1. 2.1 Typical Applications
    2. 2.2 Features
  4. Electrical Performance Specifications
  5. Schematic
  6. Test Setup
    1. 5.1 Test Equipment
    2. 5.2 Recommended Test Setup
  7. Configurations
    1. 6.1 Enable/Disable Switch S1
  8. Test Procedure
    1. 7.1 Line/Load Regulation and Efficiency Measurement Procedure
    2. 7.2 List of Test Points
    3. 7.3 Equipment Shutdown
  9. Performance Data and Typical Characteristic Curves
    1. 8.1 Efficiency
    2. 8.2 Load Regulation
    3. 8.3 Line Regulation
    4. 8.4 Load Transient
    5. 8.5 Output Ripple
    6. 8.6 Switching Node
    7. 8.7 Enable Start-Up
    8. 8.8 Disable
    9. 8.9 Thermal Image
  10. EVM Assembly Drawing and PCB Layout
  11. 10List of Materials
  12. 11Revision History

Description

The TPS53015EVM-126 provides the user with a convenient way to evaluate the TPS53015 D-CAP2™ mode control in a cost-sensitive application. Providing a 1.05-V output at up to 8 A from a loosely regulated 12-V (8 V–22 V) source, the TPS53015EVM-126 is designed to demonstrate the TPS53015 in a typical point-of-load application while providing a number of test points to evaluate the performance of the TPS53015.