SLVU659C March   2012  – June 2021 TPS62125

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Background
    2. 1.2 Performance Specification
    3. 1.3 Modifications
      1. 1.3.1 Input and Output Capacitors
      2. 1.3.2 Feedforward Capacitor
      3. 1.3.3 Loop Response Measurement
  3. 2Setup
    1. 2.1 Input/Output Connector Descriptions
    2. 2.2 Setup
  4. 3TPS62125EVM-044 Test Results
  5. 4Board Layout
  6. 5TPS62125EVM-044 Photos
  7. 6Schematic and Bill of Materials
    1. 6.1 Schematic
    2. 6.2 Bill of Materials
  8. 7Revision A files
    1. 7.1 Board Layout
    2. 7.2 Schematic and Bill of Materials
      1. 7.2.1 Schematic
      2. 7.2.2 Bill of Materials
  9. 8Revision History

1.3.2 Feedforward Capacitor

C8 is provided for a feedforward capacitor. This capacitor is not required for proper operation but can be used to improve the transient response. Typically, using a 22-pF feedforward capacitor reduces or eliminates any output voltage overshoot that may occur at start-up. C8 is located on the back side of the PCB.