SLVUAK7A November   2015  – July 2021 TPS563201

 

  1.   Trademarks
  2. 1Introduction
  3. 2Performance Specification Summary
  4. 3Modifications
    1. 3.1 Output Voltage Setpoint
  5. 4Test Setup and Results
    1. 4.1  Input/Output Connections
    2. 4.2  Start-Up Procedure
    3. 4.3  Efficiency
    4. 4.4  Load Regulation
    5. 4.5  Line Regulation
    6. 4.6  Load Transient Response
    7. 4.7  Output Voltage Ripple
    8. 4.8  Input Voltage Ripple
    9. 4.9  Start-Up
    10. 4.10 Shut-Down
  6. 5Board Layout
    1. 5.1 Layout
  7. 6Schematic, Bill of Materials, and Reference
    1. 6.1 Schematic
    2. 6.2 Bill of Materials
    3. 6.3 Reference
  8. 7Revision History

Output Voltage Ripple

The TPS563201EVM-715 output voltage ripple is shown in Figure 4-6, Figure 4-7, and Figure 4-8. The output currents are as indicated.

GUID-ABFEE137-151F-4CF7-819C-4697CA25B71B-low.gifFigure 4-6 Output Voltage Ripple, IOUT = 3 A
GUID-0FA4A54B-4FB6-4630-8093-020C78404F26-low.gifFigure 4-8 Output Voltage Ripple, IOUT = 10 mA
GUID-5D8C22DE-AECF-4532-800E-9A67B9D00D32-low.gifFigure 4-7 Output Voltage Ripple, IOUT = 250 mA