SLVUB77A July   2017  – October 2021 TPS54336A

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Background
    2. 1.2 Performance Specification Summary
    3. 1.3 Modifications
      1. 1.3.1 Output Voltage Set Point
      2. 1.3.2 Adjustable UVLO
      3. 1.3.3 Adjustable Slow Start
  3. 2Test Setup and Results
    1. 2.1  Input/Output Connections
    2. 2.2  Efficiency
    3. 2.3  Output Voltage Load Regulation
    4. 2.4  Output Voltage Line Regulation
    5. 2.5  Load Transients
    6. 2.6  Loop Characteristics
    7. 2.7  Output Voltage Ripple
    8. 2.8  Input Voltage Ripple
    9. 2.9  Powering Up
    10. 2.10 Powering Down
  4. 3Board Layout
    1. 3.1 Layout
  5. 4Schematic and Bill of Materials
    1. 4.1 Schematic
    2. 4.2 Bill of Materials
  6. 5Revision History

Output Voltage Ripple

Figure 2-7, Figure 2-8, and Figure 2-9 show the TPS54336AEVM-010 output voltage ripple for full load, light load, and skip mode operation. VIN = 24 V. The output The ripple voltage is measured directly across the output capacitors.

GUID-A043F2BA-90ED-4104-904D-10F335BEE749-low.gifFigure 2-7 TPS54336AEVM-010 Output Ripple, IOUT = 3 A
GUID-E3178CBD-96F2-4AE9-9CAC-C781F5AAB4EC-low.gifFigure 2-8 TPS54336AEVM-010 Output Ripple, IOUT = 100 mA
GUID-A666CFD6-D9B5-4ACD-B518-F1A1CA804FFC-low.gifFigure 2-9 TPS54336AEVM-010 Output Ripple, IOUT = 0 A