SLVUCP1 February   2024 ULN2003A

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Jumper Information
    2. 2.2 Test Points
  7. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  8. 4Additional Information
    1. 4.1 Trademarks

2.2 Test Points

Table 3-2 shows the test points populated on the board as well as the signal connectors.

Table 2-2 Connections and Test Points
Connector and Test PointDescription
J1, TP11B Darlington base input
J2, TP22B Darlington base input
J3, TP33B Darlington base input
J4, TP44B Darlington base input
J5, TP55B Darlington base input
J6, TP66B Darlington base input
J7, TP77B Darlington base input
J8, TP81C Darlington collector output
J9, TP92C Darlington collector output
J10, TP103C Darlington collector output
J11, TP114C Darlington collector output
J12, TP125C Darlington collector output
J13, TP136C Darlington collector output
J14, TP147C Darlington collector output
J15, TP15COM Common cathode node for flyback diodes
J29, TP16, TP17, TP18Ground test point