SWRU455M February   2017  – October 2020 CC3120 , CC3120MOD , CC3130 , CC3135 , CC3135MOD , CC3220MOD , CC3220MODA , CC3220R , CC3220S , CC3220SF , CC3230S , CC3230SF , CC3235MODAS , CC3235MODASF , CC3235MODS , CC3235MODSF , CC3235S , CC3235SF

 

  1. Overview
    1. 1.1 Trademarks
  2. Introduction
    1. 1.1 Features
    2. 1.2 Key Features
    3. 1.3 Block Diagram
    4. 1.4 Host Driver Overview
      1. 1.4.1 Host Interface
      2. 1.4.2 OS versus Non-OS
      3. 1.4.3 Quick Reference
      4. 1.4.4 Porting to Different Platforms
    5. 1.5 Acronyms and Terminologies
  3. Networking Application
    1. 2.1 Introduction
      1. 2.1.1 Wi-Fi Connectivity
      2. 2.1.2 Traffic Types
      3. 2.1.3 Security
      4. 2.1.4 User Experience
      5. 2.1.5 Power Consumption
      6. 2.1.6 Provisioning
    2. 2.2 Basic Examples
      1. 2.2.1 Wi-Fi Doorbell
        1. 2.2.1.1 Description
        2. 2.2.1.2 Design Considerations
      2. 2.2.2 Power Socket
        1. 2.2.2.1 Description
        2. 2.2.2.2 Design Constraints
      3. 2.2.3 Wi-Fi Tag
        1. 2.2.3.1 Description
        2. 2.2.3.2 Design Consideration
  4. Device
    1. 3.1  Introduction
    2. 3.2  Key Features
    3. 3.3  Start and Stop
      1. 3.3.1 Start
      2. 3.3.2 Stop
      3. 3.3.3 Hibernate and Shutdown
      4. 3.3.4 Lock State
      5. 3.3.5 Initialization Sequence
    4. 3.4  Host Interface
      1. 3.4.1 SPI Interface
      2. 3.4.2 UART Interface
        1. 3.4.2.1 Change UART Baud Rate
    5. 3.5  Version
    6. 3.6  Event Mask
    7. 3.7  Time and Date
    8. 3.8  MAC Address
    9. 3.9  Device Name
    10. 3.10 Domain Name
    11. 3.11 Device Status
    12. 3.12 Persistent Configuration
    13. 3.13 Device Statistics
    14. 3.14 Errors
  5. WLAN
    1. 4.1  Introduction
    2. 4.2  Key Features
    3. 4.3  Station (STA)
      1. 4.3.1 General Description
      2. 4.3.2 Configurations and Settings
        1. 4.3.2.1 Set Mode
        2. 4.3.2.2 Set General STA Parameters
      3. 4.3.3 Connection
        1. 4.3.3.1 Connection Policies
        2. 4.3.3.2 Preferred Networks (Profiles)
        3. 4.3.3.3 Manual Connection
      4. 4.3.4 Events and Errors
      5. 4.3.5 RSSI Trigger
      6. 4.3.6 Soft-Roaming
      7. 4.3.7 Beacon Interval and DTIM Period
      8. 4.3.8 Agile Multiband
      9. 4.3.9 Triggered Roaming
    4. 4.4  Access Point
      1. 4.4.1 General Description
      2. 4.4.2 Configurations and Settings
        1. 4.4.2.1 Set Mode
        2. 4.4.2.2 Set General AP Parameters
        3. 4.4.2.3 Get General AP Parameters
        4. 4.4.2.4 Black List
      3. 4.4.3 Set Network Configuration
        1. 4.4.3.1 Set AP IP Parameters
      4. 4.4.4 Station Management
        1. 4.4.4.1 Get Connected Stations
        2. 4.4.4.2 Disconnect a Station
      5. 4.4.5 Events and Errors
      6. 4.4.6 Limitations
    5. 4.5  Wi-Fi Direct
      1. 4.5.1 General Description
      2. 4.5.2 Supported Features
      3. 4.5.3 Configurations and Settings
        1. 4.5.3.1 Configuring Wi-Fi Direct General Parameters
        2. 4.5.3.2 Set Wi-Fi Direct Policy
        3. 4.5.3.3 Configure Connection Policy
      4. 4.5.4 Connection
      5. 4.5.5 Events and Errors
      6. 4.5.6 Limitations
    6. 4.6  WLAN Security
      1. 4.6.1 Personal Security
      2. 4.6.2 Enterprise Security
      3. 4.6.3 WPS
    7. 4.7  Scan
      1. 4.7.1 General Description
      2. 4.7.2 Connection Scan
      3. 4.7.3 Configuration (AP/STA)
      4. 4.7.4 Usage
      5. 4.7.5 Miscellaneous
    8. 4.8  Antenna Diversity
      1. 4.8.1 Overview
      2. 4.8.2 Configuration
      3. 4.8.3 Pad Selection
    9. 4.9  Calibrations
      1. 4.9.1 2.4-GHz Wi-Fi Calibration Modes
      2. 4.9.2 5-GHz Wi-Fi Calibration Modes
        1. 4.9.2.1 Serving Channel Calibrations
        2. 4.9.2.2 Non-Serving Channel Calibrations
        3. 4.9.2.3 Storing Calibration Data
        4. 4.9.2.4 Transceiver Socket
    10. 4.10 BLE / 2.4-GHz Radio Coexistence
      1. 4.10.1 Key Features
      2. 4.10.2 Configuration and Settings
      3. 4.10.3 Operation
        1. 4.10.3.1 Calibration
  6. Network Addresses
    1. 5.1 Introduction
    2. 5.2 Key Features
    3. 5.3 Addressing
      1. 5.3.1 IPv4 Addresses
      2. 5.3.2 IPv6 Addresses
        1. 5.3.2.1 Local Link
        2. 5.3.2.2 Link-Global
      3. 5.3.3 DNS Addresses
    4. 5.4 DHCPv4 Client
      1. 5.4.1 Modes
      2. 5.4.2 Address Release
    5. 5.5 DHCPv4 Server
      1. 5.5.1 Enable and Disable the DHCP Server
      2. 5.5.2 Set DHCP Server Parameters
    6. 5.6 DNS Server
    7. 5.7 Errors and Asynchronous Events
  7. Socket
    1. 6.1 Introduction
    2. 6.2 Key Features
    3. 6.3 Socket Types
    4. 6.4 BSD API
    5. 6.5 Socket Working Flow
      1. 6.5.1 TCP
        1. 6.5.1.1 Client Side
        2. 6.5.1.2 Server Side
        3. 6.5.1.3 TCP Keep Alive
      2. 6.5.2 UDP
        1. 6.5.2.1 Multicast
        2. 6.5.2.2 Packet Boundary
      3. 6.5.3 RAW
        1. 6.5.3.1 Layer 4: Transport
        2. 6.5.3.2 Layer 3: Network
        3. 6.5.3.3 Layer 2: Data Link (Transceiver Mode, Not Connected)
      4. 6.5.4 Network Bypass Mode
    6. 6.6 DNS
    7. 6.7 Operation Modes
      1. 6.7.1 Nonblocking Mode
      2. 6.7.2 Trigger Mode
        1. 6.7.2.1 Trigger Mode for Accept
        2. 6.7.2.2 Trigger Mode for Data Reception
      3. 6.7.3 Multiple Select
    8. 6.8 IP Fragmentation
    9. 6.9 Errors
  8. Secure Socket
    1. 7.1 Introduction
    2. 7.2 Key Features
    3. 7.3 Opening a Secure Socket
    4. 7.4 Trusted Root-Certificate Catalog
    5. 7.5 Options and Features Use
      1. 7.5.1 Set TLS Version
      2. 7.5.2 Set Cipher Suites
      3. 7.5.3 Set Certificates, Root CA, Private Key, and DH Files
      4. 7.5.4 Disable the Use of the Trusted Root-Certificate Catalog
      5. 7.5.5 Set ALPN List
        1. 7.5.5.1 ALPN Fixed List
        2. 7.5.5.2 ALPN Generic
      6. 7.5.6 Set Domain Name for Verification and SNI
      7. 7.5.7 Enable OCSP Check
      8. 7.5.8 Upgrade Nonsecured Socket to Secured
      9. 7.5.9 Get Connection Parameters
    6. 7.6 Supported Cryptographic Algorithms
    7. 7.7 Common Errors and Asynchronous Events
      1. 7.7.1 Using Socket Asynchronous Events in TLS
      2. 7.7.2 Common Errors
  9. File System
    1. 8.1  Introduction
    2. 8.2  Key Features
    3. 8.3  File System Characteristics
    4. 8.4  Write a File
      1. 8.4.1 Introduction
      2. 8.4.2 Create a File versus Open for Write
      3. 8.4.3 Create a File
        1. 8.4.3.1 Secure File Creation Notes
        2. 8.4.3.2 Forced Creation Flags
      4. 8.4.4 Open a File for Write
      5. 8.4.5 Write an Opened File
      6. 8.4.6 Close an Opened File (for Write)
      7. 8.4.7 Close an Opened Secure-Signed File (for Write)
    5. 8.5  Read a File
      1. 8.5.1 Open a File for Read
      2. 8.5.2 Read an Opened File
      3. 8.5.3 Close an Opened File (for Read)
    6. 8.6  Delete a File
    7. 8.7  Rename a File
    8. 8.8  File System Helper Functions
      1. 8.8.1 Get File Information
      2. 8.8.2 Get Storage Information
      3. 8.8.3 Get List of Files
    9. 8.9  Bundle Protection
      1. 8.9.1 Bundle File States
      2. 8.9.2 Bundle States
        1. 8.9.2.1 STOPPED
        2. 8.9.2.2 STARTED
        3. 8.9.2.3 PENDING_COMMIT
      3. 8.9.3 Commit a Bundle
      4. 8.9.4 Rollback a Bundle
      5. 8.9.5 Retrieve the Bundle and Files State
      6. 8.9.6 M4 Host Application Bundle Aspects
    10. 8.10 File Commit Feature
      1. 8.10.1 File Commit Process
    11. 8.11 File Rollback Process
    12. 8.12 Programming
      1. 8.12.1 Creation of the Programming Image
        1. 8.12.1.1 Programming Image Types
        2. 8.12.1.2 Program the Device
          1. 8.12.1.2.1 Image Creator Tool (UART) Programming
          2. 8.12.1.2.2 Host Programming
          3. 8.12.1.2.3 External Tool Programming
    13. 8.13 Restore to Factory
      1. 8.13.1 Restore to Factory by the Host
      2. 8.13.2 Restore to Factory by Using the SOP
        1. 8.13.2.1 CC31xx
        2. 8.13.2.2 CC32xx
    14. 8.14 Security Alerts
    15. 8.15 Design Consideration
      1. 8.15.1 Choosing SFLASH Type
      2. 8.15.2 Software Design Consideration
      3. 8.15.3 Retrieving Info Regarding SFLASH Usage
      4. 8.15.4 SFLASH Size
        1. 8.15.4.1 Restore to Factory is Disabled
        2. 8.15.4.2 Restore to Factory is Enabled
      5. 8.15.5 Storage Usage Information
  10. HTTP Server
    1. 9.1 Introduction
      1. 9.1.1 Built-in Configuration Pages
      2. 9.1.2 RESTful APIs
        1. 9.1.2.1 Changing Configuration
        2. 9.1.2.2 Reading Configuration
      3. 9.1.3 Custom Static Pages
        1. 9.1.3.1 Custom Pages With Device Tokens
        2. 9.1.3.2 Static Pages With Host Tokens
      4. 9.1.4 Host Application Interface
    2. 9.2 Key Features
    3. 9.3 Configurations and Settings
    4. 9.4 RESTful API Processing
      1. 9.4.1  Ping
      2. 9.4.2  IP Configuration
      3. 9.4.3  URN Configuration
      4. 9.4.4  WLAN Profiles
      5. 9.4.5  WLAN Scan
      6. 9.4.6  Provisioning Confirmation
      7. 9.4.7  Connection Policy
      8. 9.4.8  Station Action
      9. 9.4.9  AP Black List
      10. 9.4.10 Date and Time
    5. 9.5 Device Parameter Querying Through HTTP (Device Tokens)
      1. 9.5.1  Retrieving Tokens Through GET Request
      2. 9.5.2  Embedded Tokens
      3. 9.5.3  System Information
      4. 9.5.4  Version Information
      5. 9.5.5  Network Information
      6. 9.5.6  Ping Results
      7. 9.5.7  Connection Policy Status
      8. 9.5.8  Provisioning
      9. 9.5.9  Display Profile Information
      10. 9.5.10 P2P Information
      11. 9.5.11 Host Tokens
    6. 9.6 Resource Search Order
      1. 9.6.1 GET Request Search Order
      2. 9.6.2 POST Request Search Order
      3. 9.6.3 PUT and DELETE Request Search Order
    7. 9.7 Host HTTP Requests Processing
      1. 9.7.1 Metadata (TLVs) Description
      2. 9.7.2 GET Processing
        1. 9.7.2.1 Fragmentation
      3. 9.7.3 POST Processing
        1. 9.7.3.1 Long Requests and Delayed Responses
      4. 9.7.4 PUT Processing
      5. 9.7.5 DELETE Processing
    8. 9.8 Security
      1. 9.8.1 Authentication
        1. 9.8.1.1 HTTP Realm
      2. 9.8.2 Secure Connection
    9. 9.9 Processing of Parallel Requests
  11. 10mDNS
    1. 10.1 Introduction
    2. 10.2 Key Features
    3. 10.3 Configurations and Settings
    4. 10.4 Query
      1. 10.4.1 One Shot Query
      2. 10.4.2 Continuous Query
      3. 10.4.3 Mask Services
    5. 10.5 Get Service List
    6. 10.6 Advertisement
      1. 10.6.1 Registering mDNS Services
      2. 10.6.2 Unregistering mDNS Services
      3. 10.6.3 Advertisement Settings
        1. 10.6.3.1 Timing
        2. 10.6.3.2 Update Text
    7. 10.7 Limitations
  12. 11Rx Filters
    1. 11.1 Introduction
    2. 11.2 Matching Process
      1. 11.2.1 Filter Matching
      2. 11.2.2 Tree Traversal
    3. 11.3 Examples of Filter Use
      1. 11.3.1 Example 1
      2. 11.3.2 Example 2
    4. 11.4 Filter Creation
      1. 11.4.1 Filter Type
      2. 11.4.2 Filter Flags
      3. 11.4.3 Rule Structure for Header Filters
        1. 11.4.3.1 Field
        2. 11.4.3.2 Compare Functions
        3. 11.4.3.3 Rule Fields
        4. 11.4.3.4 Pattern-Matching Rule Fields
      4. 11.4.4 Rule Structure for Combined Filters
      5. 11.4.5 Filter Trigger
        1. 11.4.5.1 Parent Filter ID
        2. 11.4.5.2 Connection State and Role
        3. 11.4.5.3 Filter During Transceiver Mode
      6. 11.4.6 Rx Filter Action
        1. 11.4.6.1 Send Events Action
        2. 11.4.6.2 Multiple Bits Set on the Same Event
        3. 11.4.6.3 Multiple Events From the Same Rx Frame
        4. 11.4.6.4 Code Example
        5. 11.4.6.5 Counter Action
    5. 11.5 Managing Filters
      1. 11.5.1 Enable and Disable Filters
      2. 11.5.2 Get Filter Status
      3. 11.5.3 Removing a Filter
      4. 11.5.4 Storing Filters into the SFLASH
      5. 11.5.5 Update Filter Arguments
  13. 12Ping
    1. 12.1 General Description
    2. 12.2 Start and Stop Ping
    3. 12.3 Limitations
  14. 13Transceiver
    1. 13.1 Introduction
    2. 13.2 Key Features
    3. 13.3 Configurations and Setting
      1. 13.3.1 Open Transceiver Socket
      2. 13.3.2 Close Transceiver Socket
      3. 13.3.3 Send Data
      4. 13.3.4 Receive Data
    4. 13.4 Internal Packet Generator
    5. 13.5 CW
    6. 13.6 Changing Socket Properties
      1. 13.6.1 Change Operating Channel
      2. 13.6.2 Change Default PHY Data Rate
      3. 13.6.3 Change Tx Power
      4. 13.6.4 Change Number of Frames to Transmit (Internal Packet Generator)
      5. 13.6.5 Change 802.11b Preamble
      6. 13.6.6 Set CCA Threshold
      7. 13.6.7 Set Tx Frames Time-out
      8. 13.6.8 Enable or Disable Sending ACKs
    7. 13.7 Limitations
  15. 14Real-Time RSSI
    1. 14.1 Introduction
    2. 14.2 Data Structure
    3. 14.3 Configurations and Settings
      1. 14.3.1 Connect to an AP
      2. 14.3.2 Opening Real-Time RSSI Socket
      3. 14.3.3 Example Code
    4. 14.4 Constraints
  16. 15Power Management
    1. 15.1 Introduction
      1. 15.1.1 Key Features
      2. 15.1.2 LPDS
      3. 15.1.3 802.11 Power Save
        1. 15.1.3.1 LSI (Long Sleep Interval)
      4. 15.1.4 WFA IoT Low Power
      5. 15.1.5 Low Power versus Latency
      6. 15.1.6 Power Modes versus Device Modes
    2. 15.2 Configurations and Settings
      1. 15.2.1 Changing Power Policy
      2. 15.2.2 Enabling Fast Connect
    3. 15.3 Network Applications and Power Consumption
      1. 15.3.1 mDNS
      2. 15.3.2 HTTP Server
    4. 15.4 Design Guidelines
      1. 15.4.1 LSI and Packet Loss
      2. 15.4.2 PHY Calibration Mode
  17. 16Provisioning
    1. 16.1  Introduction
    2. 16.2  Key Features
    3. 16.3  Provisioning Process Overview
      1. 16.3.1 Configuring a Profile
      2. 16.3.2 Confirming a Profile
    4. 16.4  Host Provisioning Application Flow
    5. 16.5  Configuration Modes
      1. 16.5.1 AP Provisioning
      2. 16.5.2 SC Provisioning
      3. 16.5.3 AP and SC Provisioning
      4. 16.5.4 AP and SC and External Configuration Provisioning
    6. 16.6  Starting and Stopping the Provisioning Process
    7. 16.7  Auto-Provisioning
    8. 16.8  Delivering Feedback to the User
      1. 16.8.1 External Confirmation
    9. 16.9  External Configuration
    10. 16.10 Common Events and Errors
      1. 16.10.1 Provisioning Status Event
      2. 16.10.2 Provisioning Profile-Added Event
      3. 16.10.3 Reset Request Event
      4. 16.10.4 Errors
      5. 16.10.5 Host Commands During Provisioning
    11. 16.11 Usage Examples
      1. 16.11.1 Successful SmartConfig Provisioning
      2. 16.11.2 Unsuccessful SmartConfig Provisioning
      3. 16.11.3 Successful SmartConfig Provisioning With AP Fallback
      4. 16.11.4 Successful AP Provisioning
      5. 16.11.5 Successful AP Provisioning With Cloud Confirmation
      6. 16.11.6 Using External Configuration Method: WAC
      7. 16.11.7 Successful SmartConfig Provisioning While External Configuration Enabled
  18. 17Crypto Utilities
    1. 17.1 Introduction
      1. 17.1.1 API and Usage
        1. 17.1.1.1 Install and Uninstall Key-Pairs and Certificates
        2. 17.1.1.2 Create or Remove Temporary Key
        3. 17.1.1.3 Get Public Key
        4. 17.1.1.4 Certificate Creation
        5. 17.1.1.5 Sign Buffer
        6. 17.1.1.6 Verify Buffer
        7. 17.1.1.7 True Random Number
      2. 17.1.2 Limitations and Constraints
      3. 17.1.3 Errors
    2. 17.2 Secured Content Delivery
      1. 17.2.1 SimpleLink Wi-Fi Side Process Flow
      2. 17.2.2 Encrypted File Format
  19. 18Hostless Mode
    1. 18.1 Introduction
    2. 18.2 Script Overview
    3. 18.3 Conditions
      1. 18.3.1 Pre-Initialization
      2. 18.3.2 System Event
      3. 18.3.3 Timer Expiration
      4. 18.3.4 Counter Threshold
      5. 18.3.5 Internal Errors
    4. 18.4 Sub-Conditions
    5. 18.5 Actions
      1. 18.5.1 Pre-Initialization Actions
        1. 18.5.1.1 Set Role
        2. 18.5.1.2 Delete All Profiles
        3. 18.5.1.3 Hardware GPIO
      2. 18.5.2 Run-Time Actions
        1. 18.5.2.1 Send Transceiver Packet
        2. 18.5.2.2 Send UDP Packet
        3. 18.5.2.3 Send TCP Packet
        4. 18.5.2.4 Set/Increment Counter
        5. 18.5.2.5 Timer Control
        6. 18.5.2.6 Set GPIO
        7. 18.5.2.7 Enter Hibernate
  20. 19Porting the Host Driver
    1. 19.1 Introduction
    2. 19.2 Create Platform Porting File
    3. 19.3 Select Capabilities Set
    4. 19.4 Bind the Device Enable/Disable Line
    5. 19.5 Implement the Interface Communication Abstract Layer
    6. 19.6 Choose Memory-Management Model
    7. 19.7 Implement OS Adaptation Layer
      1. 19.7.1 Sync Objects
      2. 19.7.2 Locking Objects
    8. 19.8 Implement Timestamp Services
    9. 19.9 Set Asynchronous Event Handler Routines
  21. 20Debug
    1. 20.1 Capture NWP Logs
      1. 20.1.1 Overview
      2. 20.1.2 Instructions
        1. 20.1.2.1 Configuring Pin Mux for CC32xx
        2. 20.1.2.2 Terminal Settings
        3. 20.1.2.3 Run Your Program
        4. 20.1.2.4 Send to TI Engineer
          1.        A Host APIs
            1.         A.1 Host APIs
              1.          B Persistency
                1.           B.1 Persistency
                  1.            C Regulatory Domain
                    1.             C.1 Regulatory Domain
                      1.              D Supported Host Interfaces
                        1.               D.1 SPI Host Interface
                          1.                D.1.1 Introduction
                          2.                D.1.2 Abbreviations
                          3.                D.1.3 SPI Modes
                          4.                D.1.4 SPI Configurations (Shared SPI)
                          5.                D.1.5 SPI Initialization
                          6.                D.1.6 Host Interface Protocol - SPI Perspective
                        2.               D.2 UART Host Interface
                          1.                D.2.1 Introduction
                          2.                D.2.2 Host Low Power Modes
                          3.                D.2.3 UART Host Topologies
                            1.                 D.2.3.1 5-Wire UART Topology
                            2.                 D.2.3.2 4-Wire UART Topology
                            3.                 D.2.3.3 3-Wire UART Topology
                          4.                D.2.4 UART Configuration
                          5.                D.2.5 UART Initialization
                            1.                 D.2.5.1 Changing the UART Baud Rate
                          6.                D.2.6 Implementing the UART Driver - Concept and Terminology
                            1.                 D.2.6.1 UART Read API Implementation
                            2.                 D.2.6.2 UART Write API Implementation
                          7.                D.2.7 Register/Unregister Interrupt Handler API Implementation
                          8.                D.2.8 Host Interface Protocol – UART Perspective
                            1.                 D.2.8.1 UART Host Command Flow
                            2.                 D.2.8.2 Synchronization Words
                              1.                  Revision History

Set General STA Parameters

STA mode is activated with default configurations. Reconfiguring these settings is possible, but not mandatory. The following configurations are available. These configurations require reset and are always persistent with no dependency on the system-persistent configuration.

  • STA Transmit (TX) Power

    Sets the TX power which controls the transmission power level, and can increase or decrease the value, relative to the maximum TX power. The value represents steps from 0 to 15 which reflect as dBm offsets from maximum power (0 means maximum power) according to Figure 5-1.

    Note:

    Tx Power can only be set on 2.4-GHz channels.

    GUID-A41920AD-8526-42E3-8E1E-3C6190D2A83A-low.jpgFigure 4-1 Tx Output Power vs Tx Power Settings

    Example:

    _i16 Status;           
    _u8  StaPower = 3;
    Status = sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID, SL_WLAN_GENERAL_PARAM_OPT_STA_TX_POWER,1,(_u8 *)& StaPower);
    if( Status )
    {
        /* error */
    }
    
  • Set Country Code/Regulatory Domain

    Sets the country code for STA mode. This setting enables scanning, and connection only to an AP which operates on the chosen channel set.

    Table 5-3 shows the basic supported country codes.

    Table 4-3 Country Codes
    Country CodeSupported Channels
    US1-11
    EU1-13
    JP1-13

    The CC3135, CC3235S, and CC3235SF support a wider set of country codes due to the variety of channels range between countries in the 5-GHz band. The full list of supported countries could be found in Section C.

    Example:

    _i16 Status;           
    _u8  Str[] = "US";  
          
    Status = sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID, SL_WLAN_GENERAL_PARAM_OPT_COUNTRY_CODE, 2, Str);
    if( Status )
    {
        /* error */
    }
    
  • Enable/Disable 5-GHz Channels

    For CC3135, CC3235, and CC3235SF devices, this setting enables or disables 5-GHz channels in STA mode. By default, 5-GHz channels are enabled in the system and the scanning time might be longer due to the total number of enabled channels. In deployments that do not use these channels, disabling the channels might improve the scan time and power consumption.

    The mode can be changed by setting 0 to disable 5-GHz channels and 1 to enable.

    Example:

    _i16 Status;           
    _u8  Mode = 0; //0 disable 5GHz mode  
          
    Status = sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID, WLAN_GENERAL_PARAM_OPT_ENABLE_5G, 1, (_u8 *)&Mode);
    if( Status )
    {
        /* error */
    }
    
  • Enable/Disable "no PS Poll" mode

    PS POLL is used in power save policy to pull buffered frames from the AP after a beacon with unicast traffic is indicated. Using PS POLL is the standard way of power save operation.

    1. Disable - (default mode) - station sends PS-Poll ctrl frame to receive buffered frames from the AP when unicast traffic is indicated in the beacon.

    2. Enable - Station transition from power save to Active (send NULL data frame) whenever unicast traffic is indicated in the beacon (this mode is for interoperability issues with access points that doesn't fully support PS-Poll).

    Example:

    SlWlanNoPSPollMode_t NoPsPollMode;
    NoPsPollMode.Enable = 1; // enable no PS-Poll mode (work without PS-Poll frames)      
    sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID, SL_WLAN_GENERAL_PARAM_OPT_NO_PS_POLL_MODE,sizeof(SlWlanNoPSPollMode_t),(_u8 *)& NoPsPollMode);