DLPU109 May   2021

 

  1.   Trademarks
  2. 1DLPC7540EVM, DLP471TEEVM, and DLP650TEEVM Overview
    1. 1.1 Welcome
    2. 1.2 What is in the DLP471TEEVM, DLP650TEEVM, and DLPC7540EVM Evaluation Modules?
    3. 1.3 EVM Boards
    4. 1.4 Other Items Needed for Operation
    5. 1.5 DLPC7540EVM, DLP471TEEVM, and DLP650TEEVM EVM Flex Cable
  3. 2Quick Start
    1. 2.1 Downloading the Software
    2. 2.2 Connecting the DLP471TEEVM, or DLP650TEEVM, to the DLPC7540EVM
    3. 2.3 Powering-up the DLPC7540EVM and Preparing to Program the DLPC7540EVM
    4. 2.4 Programming the DLPC7540EVM and Displaying a SPLASH Image
    5. 2.5 Troubleshooting
  4. 3Connections
    1. 3.1 DLPC7540EVM Connections
    2. 3.2 DLP471TEEVM and DLP650TEEVM Connections
      1. 3.2.1 Test Points
      2. 3.2.2 Connectors
  5. 4Power Supply Requirements
    1. 4.1 External Power Supply Requirements
  6. 5Safety
    1. 5.1 Caution Labels
    2. 5.2 If You Need Assistance
  7. 6Related Documentation

3.1 DLPC7540EVM Connections

Figure 3-1 depicts the switches and connectors with their respective locations. Note that neither cables nor the power supply are included with the module.

GUID-20210412-CA0I-V2RL-STTH-QCMNHVH8JWNV-low.pngFigure 3-1 DLPC7540EVM Formatter Board Connectors

Formatter Board Connectors

  1. J2 – Micro-USB
  2. J3 – V-By-One Input
  3. J4 – 12V Fan
  4. J5 – 12V Fan
  5. J6 – Test Points Header
  6. J7 – DMD HSSI0 Flex Cable Connector
  7. J8 – 12V Fan (Heatsink)
  8. J9 – Hold Bootloader
  9. J10 – DMD HSSI1 Flex Cable Connector
  10. J12 – I2C1 Bus
  11. J16 – I2C0 Bus
  12. J17 – Actuator PWM Interface
  13. J20 – JTAG Boundary Scan
  14. J67 - 5V Enable for V-By-One Front-end Board
  15. J102 - RS232
  16. J120 - Actuator DAC Driver A/B
  17. J121 - Actuator DAC Driver C/D
  18. J122 - Actuator DAC Driver Enable
  19. J529 - 12V Input
  20. J536 - I2C2 Bus
  21. SW1 – Projector On Switch
  22. SW5 - Main Power Switch
GUID-20210412-CA0I-QSPK-D8P6-JBDGFLGG82KW-low.pngFigure 3-2 DLPC7540EVM Front-end Board Connectors

Front-end Board Connectors

  1. J1 - HDMI Input
  2. J3 - V-By-One Input