SLUUCD0 March   2024 BQ25758

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Device Information
    4. 1.4 General Texas Instruments High Voltage Evaluation (TI HV EMV) User Safety Guidelines
      1. 1.4.1 General Safety Information
  6. 2Hardware
    1. 2.1 Board Parameters
    2. 2.2 IO and Jumper Descriptions
    3. 2.3 Recommended Operating Conditions
    4. 2.4 Equipment
    5. 2.5 Equipment Setup
  7. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layout
    3. 3.3 Bill of Materials
  8. 4Revision History

2.4 Equipment

The following list of equipment is recommended when testing with a constant voltage electronic load.

  1. Power Supplies:

    A power supply capable of supplying 40 V at 8 A is required. While this part can handle larger voltage and current, larger power levels are not necessary for this procedure.

  2. Load #1:

    An Eload: Kikusui PLZ164WA 0-150V, 0-33A, or equivalent

  3. Meters:

    Six Fluke 75 multimeters, (equivalent or better) or: Three equivalent voltage meters and three equivalent current meters.

  4. Computer:

    A computer with at least one USB port and a USB cable.

  5. EV2400 Communication Kit:

    Order here: https://www.ti.com/tool/EV2400

  6. Software:

    Download and properly install bqStudio from https://www.ti.com/tool/BQSTUDIO.