SLVUAB2A September   2014  – July 2021 TPS563209

 

  1.   Trademarks
  2. 1Introduction
  3. 2Performance Specification Summary
  4. 3Modifications
    1. 3.1 Output Voltage Setpoint
  5. 4Test Setup and Results
    1. 4.1  Input/Output Connections
    2. 4.2  Start-Up Procedure
    3. 4.3  Efficiency
    4. 4.4  Load Regulation
    5. 4.5  Line Regulation
    6. 4.6  Load Transient Response
    7. 4.7  Output Voltage Ripple
    8. 4.8  Input Voltage Ripple
    9. 4.9  Start-Up
    10. 4.10 Shut-Down
  6. 5Board Layout
    1. 5.1 Layout
  7. 6Schematic, Bill of Materials, and Reference
    1. 6.1 Schematic
    2. 6.2 Bill of Materials
    3. 6.3 Reference
  8. 7Revision History

4.7 Output Voltage Ripple

The TPS563209EVM-652 output voltage ripple is shown in Figure 4-7, and Figure 4-8. The output currents are as indicated.

GUID-B66C8C12-F1A9-42C2-8948-BD0870A4D6C2-low.gifFigure 4-7 TPS563209EVM-652 Output Voltage Ripple, IOUT = 3 A
GUID-A0977CDB-01B3-4458-8815-B941C04E3F2A-low.gifFigure 4-8 TPS563209EVM-652 Output Voltage Ripple, IOUT = 0 mA