TIDT337 may   2023

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5. 1Test Prerequisites
    1. 1.1 Voltage and Current Requirements
    2. 1.2 Required Equipment
    3. 1.3 Considerations
    4. 1.4 Dimensions
    5. 1.5 Test Setup
  6. 2Testing and Results
    1. 2.1 Efficiency Graphs
    2. 2.2 Efficiency Data
  7. 3Waveforms
    1. 3.1 Output Current Ripple

1.5 Test Setup

  1. Install the TMDSCNCD280039C daughter card to the power board with the C2000™ MCU interposer board
  2. Connect two isolated 12-V DC power supplies to the "12Vp / GNDp" and "12Vs / GNDs" on the C2000 interposer board
  3. Connect a 400-V, 10-A power supply to the "HVBUS / PBGND" on the primary board
  4. Connect a 12-V, 250-A electronic load to the "12Vout / Vo-out" golden finger on the primary board
  5. Install power analyzer voltage and current meters, if you want to test the efficiency