Startseite
Startseite

COP8SGR7

OBSOLET

8-Bit CMOS OTP basierend mit 32 k-Speicher, zwei Komparatoren und USART

Jetzt bestellen
Datenblatt

COP8SGR7

OBSOLET
Datenblatt Jetzt bestellen

Produktdetails

Wir können diese Informationen nicht anzeigen. Bitte konsultieren Sie das Datenblatt für das Produkt.
PLCC (FN) 44 307.3009 mm² 17.53 x 17.53 SOIC (DW) 28 184.37 mm² 17.9 x 10.3
  • Low Cost 8‐Bit Microcontroller
  • Quiet Design (Low Radiated Emissions)
  • Multi-Input Wakeup Pins with Optional Interrupts (8 pins)
  • Mask Selectable Clock Options
    • Crystal Oscillator
    • Crystal Oscillator Option with On-Chip Bias Resistor
    • External Oscillator
    • Internal R/C Oscillator
  • Internal Power-On-Reset—User Selectable
  • WATCHDOG and Clock Monitor Logic—User Selectable
  • Eight High Current Outputs
  • 256 or 512 Bytes On-Board RAM
  • 8k to 32k ROM or OTP EPROM with Security Feature

CPU Features

  • Versatile Easy to Use Instruction Set
  • 0.67 μs Instruction Cycle Time
  • Fourteen Multi-Source Vectored Interrupts Servicing
    • External Interrupt / Timers T0 — T3
    • MICROWIRE/PLUS Serial Interface
    • Multi-Input Wake Up
    • Software Trap
    • USART (2; 1 Receive and 1 Transmit)
    • Default VIS (Default Interrupt)
  • 8-Bit Stack Pointer SP (Stack in RAM)
  • Two 8-bit Register Indirect Data Memory Pointers
  • True Bit Manipulation
  • BCD Arithmetic Instructions

Peripheral Features

  • Multi-Input Wakeup Logic
  • Three 16-bit timers (T1 — T3), each with two 16-bit registers supporting:
    • Processor Independent PWM mode
    • External Event Counter mode
    • Input Capture mode
  • Idle Timer (T0)
  • MICROWIRE/PLUS Serial Interface (SPI Compatible)
  • Full Duplex USART
  • Two Analog Comparators

I/O Features

  • Software Selectable I/O Options (TRI-STATE Output,Push-Pull Output, Weak Pull-Up Input, and High Impedance Input)
  • Schmitt Trigger Inputs on Ports G and L
  • Eight High Current Outputs
  • Packages: 28 SOIC with 24 I/O pins, 40 PDIP with 36 I/O pins, 44 PLCC, LQFP and WQFN with 40 I/O pins

Fully Static CMOS Design

  • Low Current Drain (typically < 4 μA)
  • Two Power Saving Modes: HALT and IDLE

Temperature Range

  • −40°C to +85°C, −40°C to +125°C

Development Support

  • Windowed Packages for PDIP and PLCC
  • Real Time Emulation and Debug Tools Available

All trademarks are the property of their respective owners.
  • Low Cost 8‐Bit Microcontroller
  • Quiet Design (Low Radiated Emissions)
  • Multi-Input Wakeup Pins with Optional Interrupts (8 pins)
  • Mask Selectable Clock Options
    • Crystal Oscillator
    • Crystal Oscillator Option with On-Chip Bias Resistor
    • External Oscillator
    • Internal R/C Oscillator
  • Internal Power-On-Reset—User Selectable
  • WATCHDOG and Clock Monitor Logic—User Selectable
  • Eight High Current Outputs
  • 256 or 512 Bytes On-Board RAM
  • 8k to 32k ROM or OTP EPROM with Security Feature

CPU Features

  • Versatile Easy to Use Instruction Set
  • 0.67 μs Instruction Cycle Time
  • Fourteen Multi-Source Vectored Interrupts Servicing
    • External Interrupt / Timers T0 — T3
    • MICROWIRE/PLUS Serial Interface
    • Multi-Input Wake Up
    • Software Trap
    • USART (2; 1 Receive and 1 Transmit)
    • Default VIS (Default Interrupt)
  • 8-Bit Stack Pointer SP (Stack in RAM)
  • Two 8-bit Register Indirect Data Memory Pointers
  • True Bit Manipulation
  • BCD Arithmetic Instructions

Peripheral Features

  • Multi-Input Wakeup Logic
  • Three 16-bit timers (T1 — T3), each with two 16-bit registers supporting:
    • Processor Independent PWM mode
    • External Event Counter mode
    • Input Capture mode
  • Idle Timer (T0)
  • MICROWIRE/PLUS Serial Interface (SPI Compatible)
  • Full Duplex USART
  • Two Analog Comparators

I/O Features

  • Software Selectable I/O Options (TRI-STATE Output,Push-Pull Output, Weak Pull-Up Input, and High Impedance Input)
  • Schmitt Trigger Inputs on Ports G and L
  • Eight High Current Outputs
  • Packages: 28 SOIC with 24 I/O pins, 40 PDIP with 36 I/O pins, 44 PLCC, LQFP and WQFN with 40 I/O pins

Fully Static CMOS Design

  • Low Current Drain (typically < 4 μA)
  • Two Power Saving Modes: HALT and IDLE

Temperature Range

  • −40°C to +85°C, −40°C to +125°C

Development Support

  • Windowed Packages for PDIP and PLCC
  • Real Time Emulation and Debug Tools Available

All trademarks are the property of their respective owners.

The COP8SG Family ROM and OTP based microcontrollers are highly integrated COP8 Feature core devices with 8k to 32k memory and advanced features including Analog comparators, and zero external components. These single-chip CMOS devices are suited for more complex applications requiring a full featured controller with larger memory, low EMI, two comparators, and a full-duplex USART. COP8SGx7 devices are 100% form-fit-function compatible OTP (One Time Programmable) versions for use in production or development of the COP8SGx5 ROM.

Erasable windowed versions (Q3) are available for use with a range of COP8 software and hardware development tools.

Family features include an 8-bit memory mapped architecture, 15 MHz CKI with 0.67 μs instruction cycle, 14 interrupts, three multi-function 16-bit timer/counters with PWM, full duplex USART, MICROWIRE/PLUS, two analog comparators, two power saving HALT/IDLE modes, MIWU, idle timer, on-chip R/C oscillator, high current outputs, user selectable options (WATCHDOG, 4 clock/oscillator modes, power-on-reset), 2.7V to 5.5V operation, program code security, and 28/40/44 pin packages.

The COP8SG Family ROM and OTP based microcontrollers are highly integrated COP8 Feature core devices with 8k to 32k memory and advanced features including Analog comparators, and zero external components. These single-chip CMOS devices are suited for more complex applications requiring a full featured controller with larger memory, low EMI, two comparators, and a full-duplex USART. COP8SGx7 devices are 100% form-fit-function compatible OTP (One Time Programmable) versions for use in production or development of the COP8SGx5 ROM.

Erasable windowed versions (Q3) are available for use with a range of COP8 software and hardware development tools.

Family features include an 8-bit memory mapped architecture, 15 MHz CKI with 0.67 μs instruction cycle, 14 interrupts, three multi-function 16-bit timer/counters with PWM, full duplex USART, MICROWIRE/PLUS, two analog comparators, two power saving HALT/IDLE modes, MIWU, idle timer, on-chip R/C oscillator, high current outputs, user selectable options (WATCHDOG, 4 clock/oscillator modes, power-on-reset), 2.7V to 5.5V operation, program code security, and 28/40/44 pin packages.
open-in-new Andere Nicht-Produkt suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 14
Typ Titel Datum
* Data sheet COP8SG Fam 8-Bit CMOS ROM Based and OTP Microc w/8k to 32k Mem, 2Comp & USART datasheet (Rev. E) 29 Mär 2013
Application note Replcing Dedictd Protocl Contrl w/Code Eff & Config Microc-Low Spd CAN Ntwk Apps 04 Okt 2004
Application note AN-413 Disk Interface Design Guide and Users Manual 14 Mai 2004
Application note AN-453 COPS Based Automobile Instrument Cluster 14 Mai 2004
Application note AN-579 MICROWIRE/PLUS Serial Interface 14 Mai 2004
Application note AN-587 C in Embedded Systems and the Microcontroller World 14 Mai 2004
Application note AN-596 COP800 Mathpak 14 Mai 2004
Application note AN-662 COP800 Based Automated Security/Monitoring System 14 Mai 2004
Application note AN-663 Sound Effects for the COP800 Family 14 Mai 2004
Application note AN-761 Electronic Fuzing 14 Mai 2004
Application note AN-823 Time Keeping Using a COP800 Microcontroller 14 Mai 2004
Application note AN-824 Eight Channel Eight Bit PWM Controller 14 Mai 2004
Application note AN-952 Low Cost A/D Conversion Using COP800 14 Mai 2004
Application note AN-329 Implementing an 8-Bit Buffer in COPS 10 Mai 2004

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Gehäuse Pins Herunterladen
PLCC (FN) 44 Optionen anzeigen
SOIC (DW) 28 Optionen anzeigen
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos