AFE7950-SP

ACTIVO

Radiation-hardness-assured (RHA), 4-transmit, 6-receive RF-sampling transceiver up to 10.6 GHz

Detalles del producto

Applications General purpose Number of TXs and RXs 4 TX Number of DUCs per TX 2 Number of DDCs per RX 2 RF frequency (max) (MHz) 12000 RF frequency (min) (MHz) 600 Operating temperature range (°C) -40 to 85 Rating Space
Applications General purpose Number of TXs and RXs 4 TX Number of DUCs per TX 2 Number of DDCs per RX 2 RF frequency (max) (MHz) 12000 RF frequency (min) (MHz) 600 Operating temperature range (°C) -40 to 85 Rating Space
FCBGA (ALK) 400 289 mm² 17 x 17
  • Request full data sheet
  • Radiation hardness assured AFE7950-SP:
    • Single-event latch up (SEL): 70MeV-cm2/mg
    • RLAT Total ionizing dose (TID): 100krad (Si)
  • Radiation tolerant AFE7950-SEP:
    • Single-event latch up (SEL): 43MeV-cm2/mg
    • RLAT Total ionizing dose (TID): 30krad (Si)
  • Four RF sampling 12GSPS TX DACs
  • Six RF sampling 3GSPS RX ADCs
  • Maximum RF signal bandwidth: 1200MHz (or 2400MHz for 2TX)
  • RF frequency range:
    • TX: 600MHz - 10.2GHz
    • RX: 5MHz - 10.2GHz
  • Digital step attenuators (DSA):
    • TX: 40dB range, 0.125dB steps
    • RX or FB: 25dB range, 0.5dB steps
  • Single or dual-band DUC or DDCs for TX and RX
  • SerDes data interface:
    • 8 SerDes transceivers up to 24.75Gbps
    • JESD204B/C subclass 1 compatible
  • Package: 17mm × 17mm FCBGA, 0.8mm pitch
  • Screening:
    • One fabrication, assembly, and test site
    • Product traceability
    • Extended product life cycle
    • Extended product change notification
    • Vendor item drawing
    • Radiation lot acceptance Test (RLAT) (AFE7950-Sx only)
    • Meets ASTM E595 out gassing specification (AFE7950-Sx only)
    • Production burn-in (AFE7950-SP only)
  • Request full data sheet
  • Radiation hardness assured AFE7950-SP:
    • Single-event latch up (SEL): 70MeV-cm2/mg
    • RLAT Total ionizing dose (TID): 100krad (Si)
  • Radiation tolerant AFE7950-SEP:
    • Single-event latch up (SEL): 43MeV-cm2/mg
    • RLAT Total ionizing dose (TID): 30krad (Si)
  • Four RF sampling 12GSPS TX DACs
  • Six RF sampling 3GSPS RX ADCs
  • Maximum RF signal bandwidth: 1200MHz (or 2400MHz for 2TX)
  • RF frequency range:
    • TX: 600MHz - 10.2GHz
    • RX: 5MHz - 10.2GHz
  • Digital step attenuators (DSA):
    • TX: 40dB range, 0.125dB steps
    • RX or FB: 25dB range, 0.5dB steps
  • Single or dual-band DUC or DDCs for TX and RX
  • SerDes data interface:
    • 8 SerDes transceivers up to 24.75Gbps
    • JESD204B/C subclass 1 compatible
  • Package: 17mm × 17mm FCBGA, 0.8mm pitch
  • Screening:
    • One fabrication, assembly, and test site
    • Product traceability
    • Extended product life cycle
    • Extended product change notification
    • Vendor item drawing
    • Radiation lot acceptance Test (RLAT) (AFE7950-Sx only)
    • Meets ASTM E595 out gassing specification (AFE7950-Sx only)
    • Production burn-in (AFE7950-SP only)

The AFE7950-x is a high performance, wide bandwidth multi-channel transceiver, integrating four RF sampling transmitter chains, four RF sampling receiver chains and two RF sampling feedback chains (six RF sampling ADCs total). With operation up to 10.2GHz, this device enables direct RF sampling in the L, S, C and X-band frequency ranges without the need for additional frequency conversions stages. This improvement in density and flexibility enables high-channel-count, multi-mission systems.

The TX signal paths support interpolation and digital up conversion options that deliver up to 1200MHz of signal bandwidth for four TX or 2400MHz for two TX. The output of the DUCs drives a 12GSPS DAC (digital to analog converter) with a mixed mode output option to enhance 2nd Nyquist operation. The DAC output includes a variable gain amplifier (TX DSA) with 40dB range and 1dB analog and 0.125dB digital steps.

Each receiver chain includes a 25dB range DSA (Digital Step Attenuator), followed by a 3GSPS ADC (analog-to-digital converter). Each receiver channel has an analog peak power detector and various digital power detectors to assist an external or internal autonomous automatic gain controller, and RF overload detectors for device reliability protection. Flexible decimation options provide optimization of data bandwidth up to 1200MHz for four RX without FB paths or 600MHz with two FB paths (1200MHz BW each).

The AFE7950-x is a high performance, wide bandwidth multi-channel transceiver, integrating four RF sampling transmitter chains, four RF sampling receiver chains and two RF sampling feedback chains (six RF sampling ADCs total). With operation up to 10.2GHz, this device enables direct RF sampling in the L, S, C and X-band frequency ranges without the need for additional frequency conversions stages. This improvement in density and flexibility enables high-channel-count, multi-mission systems.

The TX signal paths support interpolation and digital up conversion options that deliver up to 1200MHz of signal bandwidth for four TX or 2400MHz for two TX. The output of the DUCs drives a 12GSPS DAC (digital to analog converter) with a mixed mode output option to enhance 2nd Nyquist operation. The DAC output includes a variable gain amplifier (TX DSA) with 40dB range and 1dB analog and 0.125dB digital steps.

Each receiver chain includes a 25dB range DSA (Digital Step Attenuator), followed by a 3GSPS ADC (analog-to-digital converter). Each receiver channel has an analog peak power detector and various digital power detectors to assist an external or internal autonomous automatic gain controller, and RF overload detectors for device reliability protection. Flexible decimation options provide optimization of data bandwidth up to 1200MHz for four RX without FB paths or 600MHz with two FB paths (1200MHz BW each).

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet AFE7950-x 4T6R RF Sampling AFE with 12GSPS DACs and 3GSPS ADCs datasheet PDF | HTML 16 nov 2021
* Radiation & reliability report AFE7950-SP Production Flow and Reliability Report PDF | HTML 22 abr 2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AFE7900EVM — Módulo de evaluación de AFE7900 para AFE de muestreo de RF de cuatro transmisiones, seis receptores,

El módulo de evaluación (EVM) AFE7900 es una plataforma transceptora de muestreo de RF que se puede configurar para ser compatible con hasta cuatro canales de transmisión, cuatro de recepción y dos de retroalimentación (4T4R + 2FB).

El módulo evalúa AFE7900, que es un circuito frontal analógico (...)

Placa de evaluación

AFE7950EVM — Módulo de evaluación de AFE7950 para AFE de muestreo de RF de cuatro transmisiones, seis receptores,

El módulo de evaluación (EVM) AFE7950 es una plataforma de transceptores de muestreo de RF que puede configurarse para admitir hasta cuatro canales de transmisión y seis de recepción (4T6R) simultáneamente. El módulo evalúa el AFE7950, que es un circuito frontal analógico (AFE) de muestreo de (...)

Guía del usuario: PDF | HTML
Diseños de referencia

TIDA-010260 — Diseño de referencia de transceptor integrado de grado espacial 4T5R

El diseño de referencia del transceptor integrado de grado espacial 4T5R incorpora un transceptor completo de muestreo de RF que incluye una solución de reloj y una solución de potencia. El diseño incorpora todos los dispositivos de TI con sabor SEP y los pasivos aptos para el espacio dentro de un (...)
Design guide: PDF
Paquete Pasadores Descargar
FCBGA (ALK) 400 Ver opciones

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos