Inicio
Inicio

COP8SGE7

OBSOLETO

OTP CMOS de 8 bits basada en memoria 8k, dos comparadores y USART

Haga su pedido ahora
Hoja de datos

COP8SGE7

OBSOLETO
Hoja de datos Haga su pedido ahora

Detalles del producto

No podemos mostrar esta información. Consulte la hoja de datos del producto.
PLCC (FN) 44 307.3009 mm² 17.53 x 17.53 SOIC (DW) 28 184.37 mm² 17.9 x 10.3
  • Low Cost 8‐Bit Microcontroller
  • Quiet Design (Low Radiated Emissions)
  • Multi-Input Wakeup Pins with Optional Interrupts (8 pins)
  • Mask Selectable Clock Options
    • Crystal Oscillator
    • Crystal Oscillator Option with On-Chip Bias Resistor
    • External Oscillator
    • Internal R/C Oscillator
  • Internal Power-On-Reset—User Selectable
  • WATCHDOG and Clock Monitor Logic—User Selectable
  • Eight High Current Outputs
  • 256 or 512 Bytes On-Board RAM
  • 8k to 32k ROM or OTP EPROM with Security Feature

CPU Features

  • Versatile Easy to Use Instruction Set
  • 0.67 μs Instruction Cycle Time
  • Fourteen Multi-Source Vectored Interrupts Servicing
    • External Interrupt / Timers T0 — T3
    • MICROWIRE/PLUS Serial Interface
    • Multi-Input Wake Up
    • Software Trap
    • USART (2; 1 Receive and 1 Transmit)
    • Default VIS (Default Interrupt)
  • 8-Bit Stack Pointer SP (Stack in RAM)
  • Two 8-bit Register Indirect Data Memory Pointers
  • True Bit Manipulation
  • BCD Arithmetic Instructions

Peripheral Features

  • Multi-Input Wakeup Logic
  • Three 16-bit timers (T1 — T3), each with two 16-bit registers supporting:
    • Processor Independent PWM mode
    • External Event Counter mode
    • Input Capture mode
  • Idle Timer (T0)
  • MICROWIRE/PLUS Serial Interface (SPI Compatible)
  • Full Duplex USART
  • Two Analog Comparators

I/O Features

  • Software Selectable I/O Options (TRI-STATE Output,Push-Pull Output, Weak Pull-Up Input, and High Impedance Input)
  • Schmitt Trigger Inputs on Ports G and L
  • Eight High Current Outputs
  • Packages: 28 SOIC with 24 I/O pins, 40 PDIP with 36 I/O pins, 44 PLCC, LQFP and WQFN with 40 I/O pins

Fully Static CMOS Design

  • Low Current Drain (typically < 4 μA)
  • Two Power Saving Modes: HALT and IDLE

Temperature Range

  • −40°C to +85°C, −40°C to +125°C

Development Support

  • Windowed Packages for PDIP and PLCC
  • Real Time Emulation and Debug Tools Available

All trademarks are the property of their respective owners.
  • Low Cost 8‐Bit Microcontroller
  • Quiet Design (Low Radiated Emissions)
  • Multi-Input Wakeup Pins with Optional Interrupts (8 pins)
  • Mask Selectable Clock Options
    • Crystal Oscillator
    • Crystal Oscillator Option with On-Chip Bias Resistor
    • External Oscillator
    • Internal R/C Oscillator
  • Internal Power-On-Reset—User Selectable
  • WATCHDOG and Clock Monitor Logic—User Selectable
  • Eight High Current Outputs
  • 256 or 512 Bytes On-Board RAM
  • 8k to 32k ROM or OTP EPROM with Security Feature

CPU Features

  • Versatile Easy to Use Instruction Set
  • 0.67 μs Instruction Cycle Time
  • Fourteen Multi-Source Vectored Interrupts Servicing
    • External Interrupt / Timers T0 — T3
    • MICROWIRE/PLUS Serial Interface
    • Multi-Input Wake Up
    • Software Trap
    • USART (2; 1 Receive and 1 Transmit)
    • Default VIS (Default Interrupt)
  • 8-Bit Stack Pointer SP (Stack in RAM)
  • Two 8-bit Register Indirect Data Memory Pointers
  • True Bit Manipulation
  • BCD Arithmetic Instructions

Peripheral Features

  • Multi-Input Wakeup Logic
  • Three 16-bit timers (T1 — T3), each with two 16-bit registers supporting:
    • Processor Independent PWM mode
    • External Event Counter mode
    • Input Capture mode
  • Idle Timer (T0)
  • MICROWIRE/PLUS Serial Interface (SPI Compatible)
  • Full Duplex USART
  • Two Analog Comparators

I/O Features

  • Software Selectable I/O Options (TRI-STATE Output,Push-Pull Output, Weak Pull-Up Input, and High Impedance Input)
  • Schmitt Trigger Inputs on Ports G and L
  • Eight High Current Outputs
  • Packages: 28 SOIC with 24 I/O pins, 40 PDIP with 36 I/O pins, 44 PLCC, LQFP and WQFN with 40 I/O pins

Fully Static CMOS Design

  • Low Current Drain (typically < 4 μA)
  • Two Power Saving Modes: HALT and IDLE

Temperature Range

  • −40°C to +85°C, −40°C to +125°C

Development Support

  • Windowed Packages for PDIP and PLCC
  • Real Time Emulation and Debug Tools Available

All trademarks are the property of their respective owners.

The COP8SG Family ROM and OTP based microcontrollers are highly integrated COP8 Feature core devices with 8k to 32k memory and advanced features including Analog comparators, and zero external components. These single-chip CMOS devices are suited for more complex applications requiring a full featured controller with larger memory, low EMI, two comparators, and a full-duplex USART. COP8SGx7 devices are 100% form-fit-function compatible OTP (One Time Programmable) versions for use in production or development of the COP8SGx5 ROM.

Erasable windowed versions (Q3) are available for use with a range of COP8 software and hardware development tools.

Family features include an 8-bit memory mapped architecture, 15 MHz CKI with 0.67 μs instruction cycle, 14 interrupts, three multi-function 16-bit timer/counters with PWM, full duplex USART, MICROWIRE/PLUS, two analog comparators, two power saving HALT/IDLE modes, MIWU, idle timer, on-chip R/C oscillator, high current outputs, user selectable options (WATCHDOG, 4 clock/oscillator modes, power-on-reset), 2.7V to 5.5V operation, program code security, and 28/40/44 pin packages.

The COP8SG Family ROM and OTP based microcontrollers are highly integrated COP8 Feature core devices with 8k to 32k memory and advanced features including Analog comparators, and zero external components. These single-chip CMOS devices are suited for more complex applications requiring a full featured controller with larger memory, low EMI, two comparators, and a full-duplex USART. COP8SGx7 devices are 100% form-fit-function compatible OTP (One Time Programmable) versions for use in production or development of the COP8SGx5 ROM.

Erasable windowed versions (Q3) are available for use with a range of COP8 software and hardware development tools.

Family features include an 8-bit memory mapped architecture, 15 MHz CKI with 0.67 μs instruction cycle, 14 interrupts, three multi-function 16-bit timer/counters with PWM, full duplex USART, MICROWIRE/PLUS, two analog comparators, two power saving HALT/IDLE modes, MIWU, idle timer, on-chip R/C oscillator, high current outputs, user selectable options (WATCHDOG, 4 clock/oscillator modes, power-on-reset), 2.7V to 5.5V operation, program code security, and 28/40/44 pin packages.
open-in-new Buscar otro/a No es un producto
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 14
Tipo Título Fecha
* Data sheet COP8SG Fam 8-Bit CMOS ROM Based and OTP Microc w/8k to 32k Mem, 2Comp & USART datasheet (Rev. E) 29 mar 2013
Application note Replcing Dedictd Protocl Contrl w/Code Eff & Config Microc-Low Spd CAN Ntwk Apps 04 oct 2004
Application note AN-413 Disk Interface Design Guide and Users Manual 14 may 2004
Application note AN-453 COPS Based Automobile Instrument Cluster 14 may 2004
Application note AN-579 MICROWIRE/PLUS Serial Interface 14 may 2004
Application note AN-587 C in Embedded Systems and the Microcontroller World 14 may 2004
Application note AN-596 COP800 Mathpak 14 may 2004
Application note AN-662 COP800 Based Automated Security/Monitoring System 14 may 2004
Application note AN-663 Sound Effects for the COP800 Family 14 may 2004
Application note AN-761 Electronic Fuzing 14 may 2004
Application note AN-823 Time Keeping Using a COP800 Microcontroller 14 may 2004
Application note AN-824 Eight Channel Eight Bit PWM Controller 14 may 2004
Application note AN-952 Low Cost A/D Conversion Using COP800 14 may 2004
Application note AN-329 Implementing an 8-Bit Buffer in COPS 10 may 2004

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Paquete Pasadores Descargar
PLCC (FN) 44 Ver opciones
SOIC (DW) 28 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos