All trademarks are the property of their respective owners.
The DRV8302 is a gate driver IC for three phase motor drive applications. It provides three half bridge drivers, each capable of driving two N-channel MOSFETs. The device supports up to 1.7-A source and 2.3-A peak current capability. The DRV8302 can operate off of a single power supply with a wide range from 8-V to 60-V. It uses a bootstrap gate driver architecture with trickle charge circuitry to support 100% duty cycle. The DRV8302 uses automatic hand shaking when the high side or low side MOSFET is switching to prevent current shoot through. Integrated VDS sensing of the high and low side MOSFETs is used to protect the external power stage against overcurrent conditions.
The DRV8303 includes two current shunt amplifiers for accurate current measurement. The amplifiers support bi-directional current sensing and provide and adjustable output offset up to 3 V.
The DRV8302 also includes an integrated switching mode buck converter with adjustable output and switching frequency. The buck converter can provide up to 1.5 A to support MCU or additional system power needs.
A hardware interface allows for configuring various device parameters including dead time, overcurrent, PWM mode, and amplifier settings. Error conditions are reported through the nFAULT and nOCTW pins.
For all available packages, see the orderable addendum at the end of the data sheet.| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | DRV8302 Three Phase Gate Driver With Dual Current Shunt Amplifiers and Buck Regulator – Hardware Controlled datasheet (Rev. C) | PDF | HTML | 07 mar 2016 |
| Application note | Best Practices for Board Layout of Motor Drivers (Rev. B) | PDF | HTML | 14 oct 2021 | |
| Application note | Hardware Design Considerations for an Electric Bicycle using BLDC Motor (Rev. B) | 23 jun 2021 | ||
| Application note | System Design Considerations for High-Power Motor Driver Applications | PDF | HTML | 22 jun 2021 | |
| White paper | Power Electronics in Motor Drives: Where is it? (Rev. A) | 01 oct 2019 | ||
| Application note | Hardware Design Considerations for an Efficient Vacuum Cleaner Using a BLDC Moto (Rev. B) | PDF | HTML | 06 mar 2019 | |
| Application note | InstaSPIN(tm) BLDC Lab | 15 nov 2011 | ||
| Application note | Sensored 3-Phase BLDC Motor Control Using MSP430 | 20 jul 2011 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
The BOOSTXL-DRV8301 is 10A, 3-phase brushless DC drive stage based on the DRV8301 pre-driver and CSD18533Q5A NexFET™ power MOSFET. The module has 3x low side current sense amps (2 internal to DRV8301, 1 external). The module also has a 1.5A step down buck converter, is fully protected with (...)
| Paquete | Pasadores | Descargar |
|---|---|---|
| HTSSOP (DCA) | 56 | Ver opciones |
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.