Inicio Interfaz I2C & I3C ICs E/S de propósito general (GPIO) I2C
Inicio
Interfaz
I2C & I3C ICs
E/S de propósito general (GPIO) I2C

LM8327

ACTIVO

Mobile I/O Companion compatible con Key-Scan, expansión de E/S, PWM e interfaz de host ACCESS.bus

Haga su pedido ahora
Hoja de datos

LM8327

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Supply voltage (min) (V) 1.62 Supply voltage (max) (V) 1.98 Rating Catalog Operating temperature range (°C) -40 to 85
Supply voltage (min) (V) 1.62 Supply voltage (max) (V) 1.98 Rating Catalog Operating temperature range (°C) -40 to 85
CS-BGA (NYB) 36 12.25 mm² 3.5 x 3.5
  • Internal RC Oscillator, no External Clock Required
  • Internal PWM Clock Generation, no External Clock Required
  • Programmable I2C-compatible ACCESS.Bus Address (Default 0x8A)
  • Support for Keypad Matrices of up to of 8 x 12 Keys, Plus 8 Special Function (SF) Keys, for a Full 104 Key Support
  • Support for up to 26 Direct Connect Keys
  • I2C-Compatible ACCESS.Bus Slave Interface at 100 kHz (Standard-Mode) and 400 kHz (Fast-Mode)
  • Three Host-Programmable PWM Outputs for Smooth LED Brightness Modulation
  • Supports General-Purpose I/O Expansion on Pins not Otherwise Used for Keypad or PWM Output
  • 15-byte Key Event Buffer
  • Multiple Key Event Storage
  • Key Events, Errors, and Dedicated Hardware Interrupts Request Host Service by Asserting an IRQ Output
  • Automatic HALT Mode for Low Power Operation
  • Wake-Up from HALT Mode on any Interface (Rising Edge, Falling Edge or Pulse)
  • Three PWM Outputs with Dedicated Script Buffer for up to 32 Commands
  • Register-Based Command Interpreter with Auto-Increment Address

Features, Host-Controlled

  • PWM Scripting for Three PWM Outputs
  • Period of Inactivity that Triggers Entry into HALT Mode
  • Debounce Time for Reliable Key Event Polling
  • Configuration of General Purpose I/O Ports
  • Various Initialization Options (Keypad Size, etc.)

Features, Key Device

  • 1.8V ± 10% Single-Supply Operation
  • On-Chip Power-On Reset (POR)
  • ESD Glitch Filter on RESETN Pin
  • Watchdog Timer
  • Dedicated Slow Clock Input for 32 kHz up to 8MHz
  • −40°C to +85°C Temperature Range
  • 36-pin csBGA Package

All trademarks are the property of their respective owners.

  • Internal RC Oscillator, no External Clock Required
  • Internal PWM Clock Generation, no External Clock Required
  • Programmable I2C-compatible ACCESS.Bus Address (Default 0x8A)
  • Support for Keypad Matrices of up to of 8 x 12 Keys, Plus 8 Special Function (SF) Keys, for a Full 104 Key Support
  • Support for up to 26 Direct Connect Keys
  • I2C-Compatible ACCESS.Bus Slave Interface at 100 kHz (Standard-Mode) and 400 kHz (Fast-Mode)
  • Three Host-Programmable PWM Outputs for Smooth LED Brightness Modulation
  • Supports General-Purpose I/O Expansion on Pins not Otherwise Used for Keypad or PWM Output
  • 15-byte Key Event Buffer
  • Multiple Key Event Storage
  • Key Events, Errors, and Dedicated Hardware Interrupts Request Host Service by Asserting an IRQ Output
  • Automatic HALT Mode for Low Power Operation
  • Wake-Up from HALT Mode on any Interface (Rising Edge, Falling Edge or Pulse)
  • Three PWM Outputs with Dedicated Script Buffer for up to 32 Commands
  • Register-Based Command Interpreter with Auto-Increment Address

Features, Host-Controlled

  • PWM Scripting for Three PWM Outputs
  • Period of Inactivity that Triggers Entry into HALT Mode
  • Debounce Time for Reliable Key Event Polling
  • Configuration of General Purpose I/O Ports
  • Various Initialization Options (Keypad Size, etc.)

Features, Key Device

  • 1.8V ± 10% Single-Supply Operation
  • On-Chip Power-On Reset (POR)
  • ESD Glitch Filter on RESETN Pin
  • Watchdog Timer
  • Dedicated Slow Clock Input for 32 kHz up to 8MHz
  • −40°C to +85°C Temperature Range
  • 36-pin csBGA Package

All trademarks are the property of their respective owners.

The LM8327 GenI/O-Expander and Keypad Controller is a dedicated device to unburden a host processor from scanning a matrix-addressed keypad and to provide flexible and general purpose, host-programmable input/output functions. Three independent PWM timer outputs are provided for dynamic LED brightness modulation.

It communicates with a host processor through an I2C-compatible ACCESS.bus serial interface. It can communicate in Standard (100 kHz) and Fast-Mode (400 kHz) in slave Mode only.

All available input/output pins can alternately be used as a direct key input connection, an input or an output in a keypad matrix, or as a host-programmable general purpose input or output.

Any pin programmed as an input can also sense hardware interrupts. The interrupt polarity (“high-to-low” or “low-to-high” transition) is thereby programmable.

The LM8327 follows a predefined register based set of commands. Upon startup (power on) a configuration file must be sent from the host to setup the hardware of the device.

The LM8327 GenI/O-Expander and Keypad Controller is a dedicated device to unburden a host processor from scanning a matrix-addressed keypad and to provide flexible and general purpose, host-programmable input/output functions. Three independent PWM timer outputs are provided for dynamic LED brightness modulation.

It communicates with a host processor through an I2C-compatible ACCESS.bus serial interface. It can communicate in Standard (100 kHz) and Fast-Mode (400 kHz) in slave Mode only.

All available input/output pins can alternately be used as a direct key input connection, an input or an output in a keypad matrix, or as a host-programmable general purpose input or output.

Any pin programmed as an input can also sense hardware interrupts. The interrupt polarity (“high-to-low” or “low-to-high” transition) is thereby programmable.

The LM8327 follows a predefined register based set of commands. Upon startup (power on) a configuration file must be sent from the host to setup the hardware of the device.
open-in-new Buscar otro/a E/S de propósito general (GPIO) I2C
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet LM8327 Mobile I/O Companion Supporting Keyscan, I/O Expansion, PWM, & ACCESS.bus datasheet (Rev. A) 02 may 2013
Application note Understanding the I2C Bus PDF | HTML 30 jun 2015
Application note Maximum Clock Frequency of I2C Bus Using Repeaters 15 may 2015
Application note I2C Bus Pull-Up Resistor Calculation PDF | HTML 13 feb 2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Guía del usuario: PDF
Ver opciones
Paquete Pasadores Descargar
CS-BGA (NYB) 36 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos