ホーム パワー・マネージメント AC/DC & DC/DC converters (integrated FET)

ハンドヘルド・アプリケーション向け、高性能、小型、1.5A、降圧 DC/DC コンバータ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
TPS62825 アクティブ 1% 精度、1.5mm x 1.5mm の QFN パッケージ封止、2.4V ~ 5.5V 入力、2A 降圧コンバータ Smaller solution size with higher output voltage range 0.6 V to 4 V

製品詳細

Iout (max) (A) 1.5 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Topology Buck Type Converter Switching frequency (min) (kHz) 2700 Switching frequency (max) (kHz) 3600 Features Adaptive/Dynamic Voltage Scaling, Enable, Power good, Synchronous Rectification Control mode Voltage mode Vout (min) (V) 0.8 Vout (max) (V) 1.2 Rating Catalog Operating temperature range (°C) -30 to 85 Iq (typ) (A) 0.0004
Iout (max) (A) 1.5 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Topology Buck Type Converter Switching frequency (min) (kHz) 2700 Switching frequency (max) (kHz) 3600 Features Adaptive/Dynamic Voltage Scaling, Enable, Power good, Synchronous Rectification Control mode Voltage mode Vout (min) (V) 0.8 Vout (max) (V) 1.2 Rating Catalog Operating temperature range (°C) -30 to 85 Iq (typ) (A) 0.0004
WSON (DSC) 10 9 mm² 3 x 3
  • VOUT = 0.8 V or 1.2 V
  • VIN = 2.5 V to 5.5 V
  • 1.5-A Maximum Load Capability
  • 3.3-MHz (Typical) PWM Fixed Switching Frequency Allows Use of 1-µH Inductor
  • ±3% DC Output Voltage Precision
  • 0.01-µA (Typical) Shutdown Current
  • Internal Synchronous Rectification for High Efficiency
  • Internal Soft Start
  • Current Overload and Thermal Shutdown Protection

All trademarks are the property of their respective owners.

  • VOUT = 0.8 V or 1.2 V
  • VIN = 2.5 V to 5.5 V
  • 1.5-A Maximum Load Capability
  • 3.3-MHz (Typical) PWM Fixed Switching Frequency Allows Use of 1-µH Inductor
  • ±3% DC Output Voltage Precision
  • 0.01-µA (Typical) Shutdown Current
  • Internal Synchronous Rectification for High Efficiency
  • Internal Soft Start
  • Current Overload and Thermal Shutdown Protection

All trademarks are the property of their respective owners.

The LM3678 step-down DC-DC converter is optimized for powering low-voltage circuits from a single Li-Ion cell battery and input voltage rails from 2.5 V to 5.5 V. It provides up to 1.5-A load current, over the entire input voltage range. LM3678 offers a 0.8V or 1.2V option. One of the pair of voltages is set through the VSELECT pin.

LM3678 operates in PWM mode with a fixed frequency of 3.3 MHz. Internal synchronous rectification provides high efficiency during PWM mode operation. In shutdown mode, the device turns off and reduces battery consumption to 0.01 µA (typical).

The LM3678 is available in a 3mm x 3mm DSC-10 package. A high switching frequency of 3.3 MHz (typical) allows use of tiny surface-mount components. Only three external surface-mount components, an inductor and two ceramic capacitors, are required (solution size less than 33 mm2). For voltages other than the voltage shown, contact TI or your distributor.

The LM3678 step-down DC-DC converter is optimized for powering low-voltage circuits from a single Li-Ion cell battery and input voltage rails from 2.5 V to 5.5 V. It provides up to 1.5-A load current, over the entire input voltage range. LM3678 offers a 0.8V or 1.2V option. One of the pair of voltages is set through the VSELECT pin.

LM3678 operates in PWM mode with a fixed frequency of 3.3 MHz. Internal synchronous rectification provides high efficiency during PWM mode operation. In shutdown mode, the device turns off and reduces battery consumption to 0.01 µA (typical).

The LM3678 is available in a 3mm x 3mm DSC-10 package. A high switching frequency of 3.3 MHz (typical) allows use of tiny surface-mount components. Only three external surface-mount components, an inductor and two ceramic capacitors, are required (solution size less than 33 mm2). For voltages other than the voltage shown, contact TI or your distributor.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
3 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート H-Perform, Mini 1.5-A Step-Dwn DC-DC Cnvrtr for Handheld Apps データシート (Rev. C) 2013年 5月 2日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
EVM ユーザー ガイド (英語) AN-1722 LM3678 Evaluation Board (Rev. B) 2013年 4月 30日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

パッケージ ピン数 ダウンロード
WSON (DSC) 10 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ