TPS62263

Name: TPS62263
Brand: TI
SKU: TPS62263
Price: 0.487 USD

アクティブ

2.25MHz、600mA、降圧型コンバータ、2 x 2mm SON/TSOT23 パッケージ

ご注文はこちら

データシート

document-pdfAcrobat TPS6226x 2.25-MHz 600-mA Step Down Converter in 2 x 2 WSON and SOT Package データシート (Rev. E) (英語) PDF | HTML

この製品には新バージョンがあります。

open-in-new

代替品と比較

比較対象デバイスと同等の機能で、ピン配置が異なる製品

TPS628510

アクティブ

SOT583 パッケージ封止、2.7V ～ 6V、0.5A、固定周波数、降圧コンバータ Smaller solution size in SOT583 package

TPS62263

アクティブ

データシート

ご注文はこちら

製品詳細

Iout (max) (A)

0.6

Vin (min) (V)

2

Vin (max) (V)

6

Topology

Buck

Type

Converter

Switching frequency (min) (kHz)

2000

Switching frequency (max) (kHz)

2500

Features

Enable, Forced PWM, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Vout (min) (V)

2.5

Vout (max) (V)

2.5

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.000015

Iout (max) (A)

0.6

Vin (min) (V)

2

Vin (max) (V)

6

Topology

Buck

Type

Converter

Switching frequency (min) (kHz)

2000

Switching frequency (max) (kHz)

2500

Features

Enable, Forced PWM, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Vout (min) (V)

2.5

Vout (max) (V)

2.5

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.000015

WSON (DRV)

6

4 mm² 2 x 2

High Efficiency Step-Down Converter
Output Current up to 600 mA
V_IN Range from 2 V to 6 V for Li-ion Batteries with
Extended Voltage Range
2.25-MHz Fixed Frequency Operation
Power Save Mode at Light Load Currents
Output Voltage Accuracy in PWM Mode ±1.5%
Typical 15-µA Quiescent Current
100% Duty Cycle for Lowest Dropout
Voltage Positioning at Light Loads
Available in a SOT (5) and 2-mm × 2-mm × 0.8-
mm WSON (6) Package
Allows <1-mm Solution Height
APPLICATIONS
- Mobile Phones, Smart Phones
- Low Power DSP Supply
- Portable Media Players
- Point-of-Load (POL) Applications

All other trademarks are the property of their respective owners

High Efficiency Step-Down Converter
Output Current up to 600 mA
V_IN Range from 2 V to 6 V for Li-ion Batteries with
Extended Voltage Range
2.25-MHz Fixed Frequency Operation
Power Save Mode at Light Load Currents
Output Voltage Accuracy in PWM Mode ±1.5%
Typical 15-µA Quiescent Current
100% Duty Cycle for Lowest Dropout
Voltage Positioning at Light Loads
Available in a SOT (5) and 2-mm × 2-mm × 0.8-
mm WSON (6) Package
Allows <1-mm Solution Height
APPLICATIONS
- Mobile Phones, Smart Phones
- Low Power DSP Supply
- Portable Media Players
- Point-of-Load (POL) Applications

All other trademarks are the property of their respective owners

The TPS6226x device is a highly efficient synchronous step-down DC/DC converter. The TPS6226x provides up to 600-mA output current from a single Li-Ion cell, and is ideal for battery-powered applications such as mobile phones and other portable equipment.

With an wide input voltage range of 2 V to 6 V, the device also supports two- and three-cell alkaline batteries, 3.3-V and 5-V input voltage rails.

The TPS6226x operates at 2.25-MHz fixed-switching frequency, and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range.

The power save mode is optimized for low-output voltage ripple. For low noise applications, the device can be forced into fixed frequency pulse-width modulation (PWM) mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6226x allows the use of small inductors and capacitors to achieve a small solution size.

The TPS6226x operates over a free air temperature range of –40°C to 85°C. It is available in a 5-pin SOT and a 6-pin 2-mm × 2-mm WSON package.

The TPS6226x device is a highly efficient synchronous step-down DC/DC converter. The TPS6226x provides up to 600-mA output current from a single Li-Ion cell, and is ideal for battery-powered applications such as mobile phones and other portable equipment.

With an wide input voltage range of 2 V to 6 V, the device also supports two- and three-cell alkaline batteries, 3.3-V and 5-V input voltage rails.

The TPS6226x operates at 2.25-MHz fixed-switching frequency, and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range.

The power save mode is optimized for low-output voltage ripple. For low noise applications, the device can be forced into fixed frequency pulse-width modulation (PWM) mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6226x allows the use of small inductors and capacitors to achieve a small solution size.

The TPS6226x operates over a free air temperature range of –40°C to 85°C. It is available in a 5-pin SOT and a 6-pin 2-mm × 2-mm WSON package.

open-in-new

その他の AC/DC & DC/DC converters (integrated FET) を検索

ダウンロード字幕付きのビデオを表示ビデオ

技術資料

star

=TI が選定したこの製品の主要ドキュメント

結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。

11 をすべて表示

	種類	タイトル		日付
*	データシート	TPS6226x 2.25-MHz 600-mA Step Down Converter in 2 x 2 WSON and SOT Package データシート (Rev. E)	PDF \| HTML	2015年 7月 30日
	アプリケーション・ノート	QFN and SON PCB Attachment (Rev. C)	PDF \| HTML	2023年 12月 6日
	アプリケーション・ノート	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)		2018年 12月 11日
	Analog Design Journal	Understanding 100% mode in low-power DC/DC converters		2018年 6月 22日
	Analog Design Journal	Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold		2017年 10月 24日
	アプリケーション・ノート	Extending the Soft Start Time Without a Soft Start Pin (Rev. B)		2017年 6月 15日
	Analog Design Journal	Testing tips for applying external power to supply outputs without an input voltage		2016年 10月 24日
	アプリケーション・ノート	Basic Calculation of a Buck Converter's Power Stage (Rev. B)		2015年 8月 17日
	Analog Design Journal	Five steps to a great PCB layout for a step-down converter		2015年 1月 29日
	アプリケーション・ノート	Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)		2012年 1月 13日
	Analog Design Journal	IQ: What it is, what it isn’t, and how to use it		2011年 6月 17日