UC3717A

アクティブ

ステッパ・モーター・ドライブ回路

この製品には新バージョンがあります。

open-in-new 代替品と比較
これまでにご購入されたお客様をサポートする目的でこの製品を引き続き生産しています。新規設計では代替品をご検討ください。
比較対象デバイスと類似の機能
DRV8231A アクティブ 電流レギュレーション機能と電流センシング機能内蔵、35V、3.7A の H ブリッジ・モーター・ドライバ Increased voltage range (33V), more current (3.7A), integrated current sensing, smaller package size
DRV8434 アクティブ 電流センシング機能と 1/256 マイクロステップ機能内蔵、48V、2.5A、バイポーラ ステッパ モーター ドライバ Wider voltage range (4.5V min), increased current (2.5A), up to 1/256 microstep indexer, more protection features
DRV8436E アクティブ 電流センシング機能内蔵、48V、1.5A、バイポーラ ステッパ モーターまたはデュアル ブラシ付きモーターのドライバ Wider voltage range (4.5V min), more current (1.5A), PH/EN and PWM control

製品詳細

Vs ABS (max) (V) 50 Peak output current (A) 1 Rating Catalog Operating temperature range (°C) 0 to 70
Vs ABS (max) (V) 50 Peak output current (A) 1 Rating Catalog Operating temperature range (°C) 0 to 70
PDIP (N) 16 181.42 mm² 19.3 x 9.4
  • Full-Step, Half-Step and Micro-Step Capability
  • Bipolar Output Current up to 1A
  • Wide Range of Motor Supply Voltage 10-46V
  • Low Saturation Voltage with Integrated Bootstrap
  • Built-In Fast Recovery Commutating Diodes
  • Current Levels Selected in Steps or Varied Continuously
  • Thermal Protection with Soft Intervention
  • Full-Step, Half-Step and Micro-Step Capability
  • Bipolar Output Current up to 1A
  • Wide Range of Motor Supply Voltage 10-46V
  • Low Saturation Voltage with Integrated Bootstrap
  • Built-In Fast Recovery Commutating Diodes
  • Current Levels Selected in Steps or Varied Continuously
  • Thermal Protection with Soft Intervention

The UC3717A is an improved version of the UC3717, used to switch drive the current in one winding of a bipolar stepper motor. The UC3717A has been modified to supply higher winding current, more reliable thermal protection, and improved efficiency by providing integrated bootstrap circuitry to lower recirculation saturation voltages. The diagram shown below presents the building blocks of the UC3717A. Included are an LS-TTL compatible logic input, a current sensor, a monostable, a thermal shutdown network, and an H-bridge output stage. The output stage features built-in fast recovery commutating diodes and integrated bootstrap pull up. Two UC3717As and a few external components form a complete control and drive unit for LS-TTL or micro-processor controlled stepper motor systems.

The UC3717A is characterized for operation over the temperature range of 0°C to +70°C.

The UC3717A is an improved version of the UC3717, used to switch drive the current in one winding of a bipolar stepper motor. The UC3717A has been modified to supply higher winding current, more reliable thermal protection, and improved efficiency by providing integrated bootstrap circuitry to lower recirculation saturation voltages. The diagram shown below presents the building blocks of the UC3717A. Included are an LS-TTL compatible logic input, a current sensor, a monostable, a thermal shutdown network, and an H-bridge output stage. The output stage features built-in fast recovery commutating diodes and integrated bootstrap pull up. Two UC3717As and a few external components form a complete control and drive unit for LS-TTL or micro-processor controlled stepper motor systems.

The UC3717A is characterized for operation over the temperature range of 0°C to +70°C.

ダウンロード

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと類似の機能
DRV8829 アクティブ 32 レベルの電流安定化機能搭載、50V、5A、ハーフ バイポーラ ステッパ モーター ドライバ The DRV8829 provides better efficiency, higher current, and a smaller package

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート Stepper Motor Drive Circuit データシート 1999年 9月 5日

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ