AFE7989
- Quad RF sampling 12-GSPS transmit DACs
- Quad RF sampling 3-GSPS receive ADCs
- Dual RF sampling 3-GSPS feedback ADCs (AFE792x only)
- Maximum RF signal bandwidth:
- TX/FB: 1200 MHz (AFE7920/88) or 400 MHz (AFE7989) or 800MHz (AFE7921)
- RX: 600 MHz (AFE7920/88) or 400 MHz (AFE7921/AFE7989)
- Digital Step Attenuators (DSA):
- TX: 40 dB range, 1-dB analog and 0.125-dB digital steps
- RX: 25 dB range, 0.5-dB steps
- FB: 25 dB range, 0.5-dB steps
- Single or dual-band DUC/DDCs (AFE7920/88 only) for TX and RX
- Dual NCOs for fast frequency switching
- Supports TDD operation with fast switching between TX and RX
- Internal PLL/VCO to generate DAC/ADC clocks
- Optional external CLK at DAC or ADC rate
- SerDes data interface:
- JESD204B and JESD204C compliant
- 8 SerDes transceivers up to 29.5 Gbps
- 8b/10b and 64b/66b encoding
- 12-bit, 16-bit, 24-bit, and 32-bit resolution
- Subclass 1 multi-device synchronization
- Package: 17-mm × 17-mm FCBGA, 0.8-mm pitch
The AFE79xx is a family of high performance, wide bandwidth multi-channel transceivers, integrating four RF sampling transmitter chains, four RF sampling receiver chains, and up to two RF sampling digitizing auxiliary chains (feedback paths). The high dynamic range of the transmitter and receiver chains allows the device to generate and receive 3G, 4G, and 5G signals from wireless base stations, while the wide bandwidth capability of the AFE79xx devices is designed for multi-band 4G and 5G base stations.
Each receiver chain includes a 25-dB range DSA (Digital Step Attenuator), followed by a 3-GSPS ADC (analog-to-digital converter). Each receiver channel has an analog peak power detector and various digital power detectors to assist an external or internal autonomous automatic gain controller, and RF overload detectors for device reliability protection. The single or dual digital down converters (DDC) provide up to 600 MHz of combined signal BW. In TDD mode, the receiver channel can be configured to dynamically switch between the traffic receiver (TDD RX) and wideband feedback receiver (TDD FB), with the capability of re-using the same analog input for both purposes.
Each transmitter chain includes a single or dual digital up converters (DUCs) supporting up to 1200-MHz combined signal bandwidth. The output of the DUCs drives a 12-GSPS DAC (digital to analog converter) with a mixed mode output option to enhance 2nd or 3rd Nyquist operation. The DAC output includes a variable gain amplifier (TX DSA) with 40-dB range and 1-dB analog and 0.125-dB digital steps.
The feedback path includes an 25-dB range DSA driving a 3-GSPS RF sampling ADC, followed by a DDC with up to 1200-MHz bandwidth.
자세한 정보 요청
상용 무선 전용 AFE7989에 대한 전체 데이터 시트 및 기타 설계 자료를 참조하십시오. 지금 요청
다른 모든 애플리케이션의 경우 TI의 범용 RF 샘플링 AFE를 참조하십시오.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | AFE79xx Quad-Channel RF Transceiver With Feedback Path datasheet (Rev. C) | PDF | HTML | 2020/06/23 |
Application note | RF Sampling Resource Guide | PDF | HTML | 2024/03/05 | |
Application note | AFE79xx Layout Guide (Rev. B) | 2021/04/06 | ||
Application note | System Design Considerations when Upgrading from JESD204B to JESD204C (Rev. A) | 2021/04/05 | ||
Application note | AFE76xx, AFE77xx, and AFE79xx JESD204 Layer Testing | 2020/04/15 | ||
Application note | Temp Profile to Maintain Optimum FIT Performance | 2019/07/23 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AFE7920EVM — AFE7920 4개 전송 4개 수신 2개 피드백 경로 RF 샘플링 트랜시버 평가 모듈
AFE7920 평가 모듈(EVM)은 최대 4개의 전송, 4개의 수신 및 2개의 피드백(4T4R+2FB) 채널을 동시에 지원하도록 구성할 수 있는 RF 샘플링 송수신기 플랫폼입니다.
보드는 DAC 및 ADC를 위한 고주파 클록 생성을 위한 14비트, 12GSPS, 디지털-아날로그 컨버터(DAC), 14비트, 3GSPS, ADC(아날로그-디지털 컨버터) 및 온칩 통합 위상 동기 루프(PLL) 및 전압 제어 오실레이터(VCO)를 지원하는 쿼드 채널, RF 샘플링, 아날로그 프론트 엔드(AFE)인 AFE7920 장치를 평가합니다.
(...)
TI-JESD204-IP — TI 고속 데이터 변환기에 연결된 FPGA용 JESD204 고속 설계 IP
JESD204 고속 설계 IP는 TI 고속 데이터 컨버터와 함께 사용할 수 있도록 로열티 없이 제공됩니다. TI는 특정 FPGA 플랫폼과 TI 데이터 컨버터 JMODE 간에 (...)
패키지 | 핀 | 다운로드 |
---|---|---|
FCBGA (ABJ) | 400 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.