BQ27Z558
- Supports high-side and low-side current sense resistors down to 1 mΩ
- Supports pack-side gauging including enhanced state of health (SOH) algorithm
- Fast QMax update option based on predicted OCV
- SHA-256 authentication responder for increased battery pack security
- Sophisticated charge algorithms
- JEITA
- Enhanced charging
- RSOC charging compensation option
- Two independent ADCs
- Support for simultaneous current and voltage sampling
- High-accuracy coulomb counter with input offset error < 1 µV (typical)
- Low-voltage (2-V) operation
- Wide-range current applications (1 mA to > 5 A)
- Active high or low pulse or level interrupt pin
- Supports battery trip point (BTP)
- Reduced power modes (typical battery pack operating range conditions)
- Typical SLEEP mode: < 11 µA
- Typical DEEP SLEEP mode: < 9 µA
- Typical HIBERNATE mode: < 3 µA
- Typical OFF mode: < 1.9 µA
- Internal and external temperature sense functions
- Diagnostic lifetime data monitor and black box recorder
- 400-kHz I 2C bus communications interface, including a 1.2-V logic level for high-speed programming and data access
- HDQ one-wire for communication with host
- Compact 12-pin DSBGA package (YPH)
The Texas Instruments BQ27Z558 Impedance Track™ gas gauge solution is a highly integrated, accurate 1-series cell gas gauge with a flash programmable custom reduced instruction-set CPU (RISC) and SHA-256 authentication for Li-ion and Li-polymer battery packs. The 1-series cell capability includes parallel cells for increased capacity.
The BQ27Z558 gas gauge communicates through I 2C-compatible and HDQ one-wire interfaces and includes several key features that can help facilitate accurate gas gauging applications. Integrated temperature sense functions (internal and external options) enable system and battery temperature measurements.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | BQ27Z558 Impedance Track™ Battery Gas Gauge Solutionfor 1-Series Cell Li-Ion Battery Packs, with 1.2-V IO Support datasheet | PDF | HTML | 2023/11/10 |
EVM User's guide | BQ27Z558EVM-084 Single-Cell Impedance Track™ Technology | PDF | HTML | 2023/11/08 | |
User guide | BQ27Z561-R2 and BQ27Z558 Technical Reference Manual (Rev. C) | PDF | HTML | 2020/02/05 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BQ27Z558EVM-084 — 단일 셀 Impedance Track™ 기술 가스 게이지용 BQ27Z558 평가 모듈
BQ27Z558 평가 모듈(EVM)은 BQ27Z558 배터리 게이지용 개발 플랫폼입니다. 회로 모듈에는 BQ27Z558 통합 회로(IC)와 1 직렬 셀 리튬 이온 또는 리튬 폴리머 배터리의 용량을 모니터링하고 예측하는 데 필요한 기타 모든 구성 요소가 포함되어 있습니다.
패키지 | 핀 | 다운로드 |
---|---|---|
DSBGA (YPH) | 12 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.