제품 상세 정보

Protocols Proprietary Modulation scheme 2(G)FSK Frequency bands 300-1000 Type Transmitter TX power (max) (dBm) 12 Data rate (max) (Mbps) 0.0768 Rating Catalog Operating temperature range (°C) -40 to 85
Protocols Proprietary Modulation scheme 2(G)FSK Frequency bands 300-1000 Type Transmitter TX power (max) (dBm) 12 Data rate (max) (Mbps) 0.0768 Rating Catalog Operating temperature range (°C) -40 to 85
TSSOP (PW) 24 49.92 mm² 7.8 x 6.4
  • True single chip UHF RF transmitter
  • Very low current consumption
  • Frequency range 300 – 1000 MHz
  • Programmable output power –20 to 12 dBm
  • Small size (TSSOP-24 package)
  • Low supply voltage (2.1 V to 3.6 V)
  • Very few external components required
  • Single-ended antenna connection
  • FSK data rate up to 76.8 kBaud
  • Complies with EN 300 220 and FCC CFR47 part 15
  • Programmable frequency in 250 Hz steps makes crystal temperature drift compensation possible without TCXO
  • Suitable for frequency hopping protocols
  • Development Kit available
  • Easy-to-use software for generating the CC1050 configuration data
  • True single chip UHF RF transmitter
  • Very low current consumption
  • Frequency range 300 – 1000 MHz
  • Programmable output power –20 to 12 dBm
  • Small size (TSSOP-24 package)
  • Low supply voltage (2.1 V to 3.6 V)
  • Very few external components required
  • Single-ended antenna connection
  • FSK data rate up to 76.8 kBaud
  • Complies with EN 300 220 and FCC CFR47 part 15
  • Programmable frequency in 250 Hz steps makes crystal temperature drift compensation possible without TCXO
  • Suitable for frequency hopping protocols
  • Development Kit available
  • Easy-to-use software for generating the CC1050 configuration data

CC1050 is a true single-chip UHF transmitter designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868 and 915 MHz, but can easily be programmed for operation at other frequencies in the 300-1000 MHz range.

The main operating parameters of CC1050 can be programmed via an easy-to-interface serial bus, thus making CC1050 a very flexible and easy to use transmitter. In a typical system CC1050 will be used together with a microcontroller and a few external passive components.

CC1050 is based on Chipcon's SmartRF® technology in 0.35 µm CMOS.

CC1050 is a true single-chip UHF transmitter designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868 and 915 MHz, but can easily be programmed for operation at other frequencies in the 300-1000 MHz range.

The main operating parameters of CC1050 can be programmed via an easy-to-interface serial bus, thus making CC1050 a very flexible and easy to use transmitter. In a typical system CC1050 will be used together with a microcontroller and a few external passive components.

CC1050 is based on Chipcon's SmartRF® technology in 0.35 µm CMOS.

다운로드

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
2개 모두 보기
유형 직함 날짜
* Errata CC1050 Errata Notes (Rev. A) 2014/04/23
* Data sheet Single-Chip Very Low Power RF Transmitter datasheet 2006/01/30

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치