DLPC300
- Required for Reliable Operation of the DLP3000
DMD - Multi-Mode, 24-Bit Input Port:
- Supports Parallel RGB With Pixel Clock Up to
33.5 MHz and 3 Input Color Bit-Depth Options:- 24-Bit RGB888 or 4:4:4 YCrCb888
- 18-Bit RGB666 or 4:4:4 YCrCb666
- 16-Bit RGB565 or 4:2:2 YCrCb565
- Supports 8-Bit BT.656 Bus Mode With Pixel
Clock Up to 33.5 MHz
- Supports Parallel RGB With Pixel Clock Up to
- Supports Input Resolutions 608 × 684, 864 × 480,
854 × 480 (WVGA), 640 × 480 (VGA), 320 × 240
(QVGA) - Pattern Input Mode
- One-to-One Mapping of Input Data to
Micromirrors - 1-Bit Binary Pattern Rates up to 4000-Hz
- 8-Bit Grayscale Pattern Rates up to 120-Hz
- One-to-One Mapping of Input Data to
- Video Input Mode with Pixel Data Processing
- Supports 1- to 60-Hz Frame Rates
- Programmable Degamma
- Spatial-Temporal Multiplexing (Dithering)
- Automatic Gain Control
- Color Space Conversion
- Output Trigger Signal for Synchronizing With
Camera, Sensor, or Other Peripherals - System Control:
- I2C Control of Device Configuration
- Programmable Current Control of up to 3 LEDs
- Integrated DMD Reset Driver Control
- DMD Horizontal and Vertical Display Image
Flip
- Low-Power Consumption: Less than 93 mW
(Typical) - External Memory Support:
- 166-MHz Mobile DDR SDRAM
- 33.3-MHz Serial FLASH
- 176-Pin, 7 × 7 mm With 0.4-mm Pitch NFBGA
Package
The DLPC300 controller provides a convenient, multi-functional interface between user electronics and the DMD, enabling high-speed pattern rates (up to 4-kHz binary), providing LED control, and data formatting for multiple input resolutions. The DLPC300 digital controller, part of the DLP3000 chipset, is required for reliable operation of the DLP3000 DMD. The DLPC300 also outputs a trigger signal for synchronizing displayed patterns with a camera, sensor, or other peripherals.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | DLPC300 DLP® Digital Controller for the DLP3000 DMD datasheet (Rev. C) | PDF | HTML | 2015/08/01 |
| * | Errata | DLP® LightCrafter™ NAND Failures Resolution | 2013/12/23 | |
| * | Errata | DLP® LightCrafter™ USB Connectivity Solutions (Rev. A) | 2012/08/16 | |
| Design guide | Portable Point Cloud Generation 3D Scanning Using DLP Technology User's Guide (Rev. A) | 2016/05/13 | ||
| User guide | DLP Software Development Kit (SDK) User's Guide | 2016/04/28 | ||
| Application note | Creating Multiple Bit Depth and Multiple Color Pattern Sequences for the DLP® Li (Rev. A) | 2013/10/29 | ||
| Application note | DLP® LightCrafter™ FPGA Overview | 2013/08/27 | ||
| Application note | DLP 0.3 WVGA Chipset Data Sheet (Rev. A) | 2013/07/31 | ||
| User guide | DLPC300 Programmer's Guide (Rev. B) | 2013/07/24 | ||
| White paper | Using the DLP LightCrafter to Trigger CCD Cameras from the Imaging Source | 2012/03/14 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DLP-OMM-SEARCH — DLP® 제품 광학 모듈 검색 툴
To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
DLPR300 — DLPC300 구성 및 지원 펌웨어
TIDA-00361 — DLP® 기술을 사용한 3D 스캔을 위한 휴대용 포인트 클라우드 생성 레퍼런스 디자인
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| NFBGA (ZVB) | 176 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.