데이터시트
LM8323
- Key Features
- Supports Keypad Matrices of up to 8 × 12 Keys Plus 8 Special-function (SF) Keys for a Total of 104 Keys. SF Keys Pull Keypad Scan Inputs Directly to Ground, Rather than Connecting to a Keypad Scan Output.
- Supports I2C-compatible ACCESS.bus Interface in Slave Mode up to 400 kHz (Fast-mode).
- Three Host-programmable PWM Outputs Useful for Smooth LED Brightness Modulation.
- Supports General-purpose I/O Expansion on Pins Not Otherwise Used for Keypad or Rotary Encoder Interface.
- Key-scan Event Storage in a FIFO Buffer for up to 15 Events.
- Key Events, Errors, and Dedicated Hardware Interrupts Request Host Service by Asserting the IRQ Output.
- The Correct Reception of a Command May be Assumed, if No Error is Reported from the LM8323 After Receiving it.
- Wake-up from Halt Mode on any Matrix Key-scan Event, any Use of the SF Keys, or Any Activity on the ACCESS.bus Interface, or Any Change in the Rotary Encoder Counter Value (if Enabled).
- Host-Controlled Functions
- Three PWM Outputs
- Period of Inactivity that Triggers Entry into Halt Mode
- Debounce Time for Reliable Key Event Polling
- Configuration of General-purpose I/O Ports
- Various Initialization Options (Keypad Size, etc.)
- Key Device Characteristics
- 1.8V ± 180 mV Single-supply Operation
- On-chip Power-on Reset (POR)
- Watchdog Timer
- Dedicated Slow Clock Input for 32 kHz
- -40°C to +85°C Industrial Temperature Range
- 36-pin csBGA Package
All trademarks are the property of their respective owners.
The LM8323 key-scan controller is a dedicated device to unburden a host from scanning a matrix-addressed keypad. In addition, the LM8323 provides general-purpose I/O expansion, a rotary encoder interface and PWM outputs useful for dynamic LED brightness modulation.
It communicates with the host through an I2C-compatible ACCESS.bus interface. An interrupt output is available for signaling key-press and key-release events. Communication frequencies up to 400 kHz (Fast-mode) bus speed are supported. The LM8323 supports a predefined set of commands. These commands enable a host device to keep control over all functions.
기술 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기4 유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | Mobile I/O Comp Supp Keyscan, I/O Expansion, PWM, & ACCESS.bus Host I/F datasheet (Rev. A) | 2013/03/26 | |
Application note | Understanding the I2C Bus | PDF | HTML | 2015/06/30 | |
Application note | Maximum Clock Frequency of I2C Bus Using Repeaters | 2015/05/15 | ||
Application note | I2C Bus Pull-Up Resistor Calculation | PDF | HTML | 2015/02/13 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
시뮬레이션 툴
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
시뮬레이션 툴
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
사용 설명서: PDF
패키지 | 핀 | 다운로드 |
---|---|---|
CS-BGA (NYB) | 36 | 옵션 보기 |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치